Will be looking to start breaking in the next couple of weeks, so if any interest in the engine/want a test drive it will be a good idea to see it running before it comes apart lol.
The car has done less than 170 road miles and most parts were new/reconned.
Shell has V5 and 11 months MOT.
Location near Swindon
Engine: was mapped at Enhanced performance and made 397bhp/386lbft but had more to go!
Custom Swedish style inlet plenum to fit the rollers £300
T3/4 Turbo £300
External wastegate £150
Hayward and Scott Custom exhaust system £500
Cone air filter £40
Zetec coil packs x2 £20 each
Pro Alloy RS500 intercooler painted black. £320
Pro Alloy radiator upside down cossie rad, so will need mounts cutting off and rewelding to fit the ‘right’ way up. Painted black £300
Pro Alloy 50L fuel cell with internal collector, including VDO fuel level sender, filler neck and locking alloy cap £800
Hard pipes silicon hoses £100
Transmission & drivetrain:
Helix 6-paddle clutch £300
driveshafts £50
3dr Cosworth front hubs £300
B&M quickshift £200
Suspension & steering:
Avo monotube coilover suspension £700
Polybush suspension top mounts £30
Carbon top mounts £70
Momo race steering wheel £40
Snap-off steering wheel hub £100 (no keys to lock)
3dr rear swing arms with polybushes £50
3dr rear ARB poly bushes and drop links £40
Wheels & tyres:
Ultralight 789 17” wheels WITH Cooper Avon tyres. Front 215/45/17 Rear 235/45/17 £900
Steel wheel nuts x16 £20
Brakes:
Goodridge braided brake lines and fittings to go throughout the car £350
Vertical Hydraulic handbrake £100
Shell:
Caged 6-point bolt-in rollcage £700
Vented bonnet with vents and aerocatches £150
Modified Saph front bumper to fit 3dr £50
Badboy grill £50
Headlights £20 each
Plastics 4 Performance polycarb rear quarter windows £100
Doors including glass, drivers has a mk6 escort lock and 2 keys, passenger delocked £80 each
3dr scuttle panel £150
3dr scuttle ends £35 each
3dr washer jets £10 (new)
Interior:
Cobra Suzuka bucket seats, including side mounts £350 each
Willans 5-point seatbelt harness pair. 1 year left for FIA approved £200 each
Flocked dashboard, cut to go round cage, has switch/gauge holes and holes cut in the top for brake reservoirs £60
Stack ST700SR £420
Stack Boost stepper motor gauge £100
Stack oil temp stepper motor guage including sump plug adaptor M14 thread £85
Stack fuel level stepper motor gauge. Back light not working for some reason £60
Stack EGT stepper motor gauge £85
Battery cutoff switch £15
Modified 3dr clock surround in carbon, with idiot lights. 80mm centre hole, and two 52mm holes £50 (will do deal if bought with gauges)
Push button starter button £20
3dr steering cowel. Some holes cracked £30
Oddesey racing gel battery £110
There will be bits I have forgotten so if there is anything else, just ask!
i should have also pointed out that it had this happen, hence breaking.