My mate's N/A 2.1 Zetec Mk2 Orion, Now Breaking
#127
I've found that life I needed.. It's HERE!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
what an awsome build and a lot of thought time and expense but i dont see the point of breaking afterwards.seems a crime to do that
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#128
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
no video's of it
He built this as he was sick of see loads of Zetec turbo out there, ok he could of built a 400/500bhp ZT for the money he has spent on this
He built this as he was sick of see loads of Zetec turbo out there, ok he could of built a 400/500bhp ZT for the money he has spent on this
#131
Advanced PassionFord User
Thread Starter
#132
Regular Contributor
Join Date: May 2007
Location: truro cornwall
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
that is mental car would mine that lump in mine lol
top stuff.
iam planning throttle bodying my 2.0 16v mondy,wanted run about 220-230bhp max just wanted to know if the std internals would be ok with apr rods bolts.
wanted to increase the comp ratio to with out using pistons, if there is way just wanted to know how really and what gasket to use?
which size throttle bodies to use ,injectors, fuel rail, inlet manifold etc as there is not a lot of space and would it be reconmend to run a air box or filter system,my only worry is loosing torque as i want to run a really torquey car as well as running over 200bhp if possible.
was going to use ms too have got a few other bits on bobs already
any help would be ace cheers daz
top stuff.
iam planning throttle bodying my 2.0 16v mondy,wanted run about 220-230bhp max just wanted to know if the std internals would be ok with apr rods bolts.
wanted to increase the comp ratio to with out using pistons, if there is way just wanted to know how really and what gasket to use?
which size throttle bodies to use ,injectors, fuel rail, inlet manifold etc as there is not a lot of space and would it be reconmend to run a air box or filter system,my only worry is loosing torque as i want to run a really torquey car as well as running over 200bhp if possible.
was going to use ms too have got a few other bits on bobs already
any help would be ace cheers daz
#135
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
He's a great engineer and fabricator John don't you think
I've seen the rear beams he's doing for Escort's, Fiesta's and puma's !!!!
I've seen the rear beams he's doing for Escort's, Fiesta's and puma's !!!!
#139
I'm Finding My Feet Here Now
Join Date: Nov 2004
Location: Nottingham
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Yeah he is, got quite a few bits off him. Waiting to see how the rear beams turn out, and considering buying a manifold/fitting kit for some GSXR750 bodies.
#141
Advanced PassionFord User
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Looks nice but lets hope the the trumpets dont crack as there only very thin spun aluminium
Happened to me before with something very similar to the above setup
Happened to me before with something very similar to the above setup
#154
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
All i know is he's fitted a ERST rad from Radtec so he can run the air duct were the intercooler would be
He's a very busy guy and his dad has cancer right now so the car is the last thing on his mind i bet
He's a very busy guy and his dad has cancer right now so the car is the last thing on his mind i bet
#158
10K+ Poster!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Awesome looking bay, Strange looking exhaust manifold though, certainly different but nothing like the Tony Law/ BTB ones that are used to make big numbers on other engines.
Either way bloody cool and nice to see something without a turbo posted on here
Either way bloody cool and nice to see something without a turbo posted on here
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
Last edited by JonnyBravo; 22-01-2009 at 08:49 PM.
#160
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
A far as i know the manifold primary's go up and over and join the collector just below the sump, size of the primary's are also massive.
Manifold has been tested on race cars that i have been told and then this one was made upto for a FWD setup
Manifold has been tested on race cars that i have been told and then this one was made upto for a FWD setup