Engine conversion over fueling won't run properly
Thread Starter
Virgin
Joined: Feb 2016
Posts: 2
Likes: 0
From: Dorset
Engine conversion over fueling won't run properly
Hi can any one help I have done a black to conversion with the efi convertion plate,2.0 biege injectors and throttle body.i have changed cam
Sensors maf,idle speed control ,coil pack,plugs,leads,pressure reg,gaskets,throttle body's,it has the 2.0 ecu and key reader,I've resolves all wiering,and checked all air feeds ect. It jus keeps over fueling and won't Rev right.. It's will drive sum times then it won't back fires,black plugs any help would be appreciated.it had the silver top in but engine gave up.mk5 escort
Sensors maf,idle speed control ,coil pack,plugs,leads,pressure reg,gaskets,throttle body's,it has the 2.0 ecu and key reader,I've resolves all wiering,and checked all air feeds ect. It jus keeps over fueling and won't Rev right.. It's will drive sum times then it won't back fires,black plugs any help would be appreciated.it had the silver top in but engine gave up.mk5 escort
Thread Starter
Virgin
Joined: Feb 2016
Posts: 2
Likes: 0
From: Dorset
[QUOTE=3doorcozmess;6656064]Pectel T6 ECU is used on alot on old school rally cars I would say have gibbs would be your best bet.
Si[/QUOTE
Can I not just replace ecu and key reader. Instead of having it re programmed..thanks for the reply new to site don't quite no how to use it.
Si[/QUOTE
Can I not just replace ecu and key reader. Instead of having it re programmed..thanks for the reply new to site don't quite no how to use it.
Too many posts.. I need a life!!
Joined: Aug 2003
Posts: 873
Likes: 21
From: sutton surrey
[QUOTE=Tommy777;6656108]Message deleted sorry posted in wrong thread
Thread
Thread Starter
Forum
Replies
Last Post
John 2.9
General Car Related Discussion.
7
Nov 16, 2016 06:18 PM