1979 skyline 2000gt project
#121
PassionFord Post Whore!!
iTrader: (2)
note to self, invent time travel, travel back and pick up cheap datsuns and a few RS500's when they did that price slump around 2004ish, garage them and become RICH! the prices for those lights is crazy mate! stick with your LED's hardly like any one on the street will even notice.
#122
15K+ Super Poster!!
iTrader: (2)
note to self, invent time travel, travel back and pick up cheap datsuns and a few RS500's when they did that price slump around 2004ish, garage them and become RICH! the prices for those lights is crazy mate! stick with your LED's hardly like any one on the street will even notice.
#123
10K+ Poster!!
Thread Starter
iTrader: (4)
note to self, invent time travel, travel back and pick up cheap datsuns and a few RS500's when they did that price slump around 2004ish, garage them and become RICH! the prices for those lights is crazy mate! stick with your LED's hardly like any one on the street will even notice.
thats what i thought lol
well my first parcel from japan should be here tommorrow.
my timing light arrived today, so i hooked it up to number 1 and got no light flash at all ?
so i tried it on 2 - 6 cylinders and it works, checked plugs and it turns out its only running on 5 lol number 1 plug is done, and has been done a while as the bores had a good clean lol
new plugs will be here tommorrow, il do a quick comp test first before i stick the new plugs in though fingers crossed its all ok.
#124
10K+ Poster!!
Thread Starter
iTrader: (4)
first parcel is here.
i fitted the c10 gtr rear boot spoiler
fitted the rear quarter skyline badges
the front chin spoiler is a c10 gtr one but its miles to narrow, im currently looking into
option for a c210 specific one that ive seen on all the ones ive seen, they are all square looking.
but as ive got it i thought sod it il chop it about and see what i can do, i managed to trim it and get it so it will fit by fixing it from behind the front valance. its just wedged in there at the moment but i am actually liking the shape of it being abit shark nose instead of just a square flat edge.
i fitted the c10 gtr rear boot spoiler
fitted the rear quarter skyline badges
the front chin spoiler is a c10 gtr one but its miles to narrow, im currently looking into
option for a c210 specific one that ive seen on all the ones ive seen, they are all square looking.
but as ive got it i thought sod it il chop it about and see what i can do, i managed to trim it and get it so it will fit by fixing it from behind the front valance. its just wedged in there at the moment but i am actually liking the shape of it being abit shark nose instead of just a square flat edge.
#125
PassionFord Post Whore!!
iTrader: (2)
if it were mine i would find it hard to decide but i think if you were to take the chrome arch liners and side strip off and then spray the chrome window trims satin black it would look more moody.
Also, what PCD are the wheels? i think some 14'inch minilites or similar with some slightly stretched low profile tires would look really good on it to.
Also, what PCD are the wheels? i think some 14'inch minilites or similar with some slightly stretched low profile tires would look really good on it to.
#126
10K+ Poster!!
Thread Starter
iTrader: (4)
welll the decision has been made im fitting all the panels.
ive fitted a proper import front number plate
moved the rear spoiler forward 2" it sits perfect now, fitted front arches and marked up rear arches for trimming, the rear also needs to be dropped 1" more to make it sit square and rear arch gap to be correct.
the centre line in the rear arch pic is where im going to cut with a plasma cutter.
i am very happy its starting to look like how i want it. arches are going to stay black, spoilers are going to be blue.
ive fitted a proper import front number plate
moved the rear spoiler forward 2" it sits perfect now, fitted front arches and marked up rear arches for trimming, the rear also needs to be dropped 1" more to make it sit square and rear arch gap to be correct.
the centre line in the rear arch pic is where im going to cut with a plasma cutter.
i am very happy its starting to look like how i want it. arches are going to stay black, spoilers are going to be blue.
#128
10K+ Poster!!
Thread Starter
iTrader: (4)
it is deciving as theres alot of tyre hidden behind the arch at the moment.
it will look something like this hopefully
i want mine to sit like the white car nice and level, so a good 1" drop at the rear will be needed with mine.
Last edited by scoooby slayer; 18-12-2012 at 05:41 PM.
#129
Lucifer II - 666
Well done on managing to make a but ugly car look quite good, so far lol
#131
Too many posts.. I need a life!!
#134
10K+ Poster!!
Thread Starter
iTrader: (4)
they certainly do mate, ive chopped another coil off the rear springs, will hopefully have some pics tonight or tommorrow of the arches trial fitted properly, im building an engine at the moment aswell, a 22 litre cat big six il add some pics later, the conrods are like my arm lol
#137
10K+ Poster!!
Thread Starter
iTrader: (4)
thanks its getting there
its already been lowered loads, id guess the rear has now been dropped around 90mm as ive dropped it another 30mm today. im hopeing i wont need to go any lower, im not looking for on its arse with rims hanging out tbh anyway.
theres alot of work involved and il update more tommorrow but drivers side is trial done, passengers should be done tommorrow. i got a pic of drivers side on the ramp wheel free
theres alot of work involved and il update more tommorrow but drivers side is trial done, passengers should be done tommorrow. i got a pic of drivers side on the ramp wheel free
#139
10K+ Poster!!
Thread Starter
iTrader: (4)
the front spring is still tight in the cups even when jacked up but the rears do now come loose but there is a long cone there so they cant slip away anywhere anyway. if i want proper lowering springs i would have to probably have some made as all i can find are 30mm lowering ones and there nowhere near enough, or id have to do a coilover conversion, im gonna try it on the cut springs first anyway, ive saved all the bits ive cut of so i can work out exactly how much drop i need.
the nearside is nearly welded up now she should be on here shoes this afternoon
#141
10K+ Poster!!
Thread Starter
iTrader: (4)
we got the arch extensions on today, front spoiler is just hanging in there at the moment and still everything needs painting but the look im after is definately coming now.
id also just like to put this in
a pic of when i first picked the car up about 6 weeks ago
and a pic of today the progress so far
Last edited by scoooby slayer; 21-12-2012 at 12:45 PM.
#142
Lucifer II - 666
Does look good now, rear spoiler should go black I think, what colour is it going to be?
#146
10K+ Poster!!
Thread Starter
iTrader: (4)
thanks, i keep looking at the carbs and after watching the video they would sound awesome aswell, im gonna drive it first though now its running on all six properly before i spend Ł1200 odd on new triple sidedraughts.
it is crazy how much a few touches changes them, a few people loved the white car and then saw mine and said how can you even compare them, they are actually exactly the same shell which is now starting to show
even if i get some watanabee reps i will still need the spacers, the rear hubs are a long way in the arch, those mage are 7j - 31 ! massive negative offset and still 40mm in the arch !
if i do get new wheels i will need around a 9 - 10j in an et0 for the rear to get them to sit right.
#149
10K+ Poster!!
Thread Starter
iTrader: (4)
well i have found the perfect rims.
rota rbx series
fronts are 17 x 9j - 13
rears are 17 x 9.5j - 19
they look like watanabee and have the angry offset im looking for, Ł640 brand new for a set aswell, i think these will be what end up on the car
rota rbx series
fronts are 17 x 9j - 13
rears are 17 x 9.5j - 19
they look like watanabee and have the angry offset im looking for, Ł640 brand new for a set aswell, i think these will be what end up on the car
#154
10K+ Poster!!
Thread Starter
iTrader: (4)
if i go black the arches will look like they join along the sill with it all being black, i cant decide yet but im thinking staying blue will look better maybe
#157
10K+ Poster!!
Thread Starter
iTrader: (4)
i use my r32 gtr as a daily, i say daily i live where i work so it only gets used once or twice a week.
im undecided again now lol
my missus got me a model of a c10 gtr for my collection, which made me take a look and believe it or not my slot mags painted black with pertrudeing centre caps are almost identical to genuine c10 gtr wheels, so i havnt mordered anything yet, ive now got some fat wheel spacers here to fit aswell
#158
Ben
Looks fantastic mate!
I like the current wheels, very period.
Definitely stick some carbs on it for the sound alone
I like the current wheels, very period.
Definitely stick some carbs on it for the sound alone
#159
10K+ Poster!!