PaulinhoT

They look good great videos as well.

Can I ask do the wing extenders fit normal ST Focus wings ?

nevsrevs

They are just bog standard focus arches so I guess so,
But you would have to guess wat they are off.

as rs

i see there the cars moved on a bit since i last looked are those arches off an audi crossover

BRIGSPORT

iTrader: (2)

Look like connect arches?

PaulinhoT

Yeah I concur Transit Connect arches for sure, they look good already

nevsrevs

Wrong wrong and wrong, lol we dug out from the back of the shed some, big bumper golf gti mk2 arches, would of been impressed if anyone got that.

We keep plodding along with the car, just got to keep doing track events too,
Cheers for the comments

The Underdog

looking good rog.

nevsrevs

This is how you roll on et20 rims, wide as truck


One eyed willy



Wait till the back is done.

PaulinhoT

Oh that does look good

nevsrevs

Cheers guys

nevsrevs

This is a sunny day at icepipe Motorsport H.Q. Getting ready for the next track day.
I did get grounded from the mrs though

The Underdog

which is the new toy? the seat or clio or neither lol

nevsrevs

Mx5 in the back ground is half mine back up track car, the Ibiza is hers, the s2000, civic and Clio are other ice pipe members car, like flys round shit when the kettles boiled.

XRT_si

iTrader: (2)

Love the arches!

nevsrevs

Cheers mate, can't believe how well they fit really, the rear ones will be alittle more tricky,
Berg cup here we come.

nevsrevs

Getting the rears arches sorted this weekend,
And we have got our new pads to try, going for carbon Lorraine's rc6 so fingers crossed we will do endo's now.










Cheers for looking guys

The Underdog

tidy spacers them. did you not go berg cup this wkend? should have come llandow yest instead.

RONNIE AMIS

iTrader: (17)

Loving the work mate looks cool. Who made your rear diffuser if you don't mind me asking?

Thanks

nevsrevs

I wanted to mate but it was all a bit tight on time,
How did you get on?

nevsrevs

Cheers Ron,
We made the diffuser got it set at 10deg after a bit of research and got as much of the car flat bottomed as poss.

nevsrevs

All finished for now, lol





We still want to go wider but that will do for now.

Minirotty

Arches look very good! what are they originally from?

The Underdog

it went well thanks. vids up in my thread.

im not getting any probs with lift off like you guys were though on mine. i set rear toe +0.10 each side and front -0.15 each side and its little too much understeer. wound shocks up on back compared to front and added more camber to front . i played around lifting off at 70 ish and it dont move.
but thats the fun in it i think trying new settings each time.

nevsrevs

Thanks guys,
Arches were of a mk2 golf,

As for lift off could be down to a few things with are set up, no rear arb and we were running probs over 1deg toe out and that on on a wet track like Combe is scary. But think we got it pretty much prefect now, (for Combe) but every track is different.

Glad it stayed dry for you.

The Underdog

it rained till bout half 10 so i i did one session in wet then dried up lovely all afternoon.

nevsrevs

Cool got to get ready for the next day now then!
Rs Combe?

The Underdog

just checked date and i got plans on 6th. gutted as its on offer for Ł114.
really hoping to get on a trig day with you guys at next opportunity.

i need to sort brakes out and i just noticed you are running solid discs. to save money for now im thinking of yellowstuff pads on standard discs, do you think that would work ok?
i ran stock with 5.1 fluid and air ducting to cool brakes and compared to my last outing on stock brakes it was much better but still went spongy and not as sharp as i want.

cheers

Straight_4_N/a

Looks good.
If you want wider rear just fit rs hubs and 20.5mm rear alxe spacers that will make you over 30mm per side wider than std and its factory safe. rear spacers are only Ł25 a set lol.

The Underdog

also i was at scrappy the other day and knowing you are running scooby brakes there was a bug eye breaking there. i was interested in them but they were reserved for someone at Ł100 for all 4 corners. bargain that would have been.

nevsrevs

Yea that would be a good cheap upgrade for you there mate, keep a eye on the bay as they do come up cheap,

We do have hub spacers already mate, took them off though as we are running 55mm wider rear track as it is at the mo,

RONNIE AMIS

iTrader: (17)

Will try and meet up at Rs Combe if you are their? What did you use to make the flat floor and diffuser?

We used the carbon Lorraine pads in the Airtec focus st.

After me Doing 5 laps around brands hatch on them they over heated and fell apart

nevsrevs

Bloody hell did not want to hear that, I had them on my Clio with good results, what grade where you using?

The splitter and boot floor are made out of alloy, and Ali backed perpex.

RONNIE AMIS

iTrader: (17)

I will double check what grade they are tomorrow. Yeah it's weird. I've always heard good things bout them

nevsrevs

Yea lets hope ours don't do that or Godspeed might get a grumpy phone call, I did run rc5 in the Clio and now we are using rc6 and have only herd good things about the newer grades, so fingers crossed,
Just could not get over the prices of ds3000

nevsrevs

We have been getting close to being pulled off track with our noise on drive by,
So thought we had better make a muffler on the screamer pipe,
It's alittle expansion chamber for it, see how it works

crazycage

nev why not pipe it back into the down pipe ?

nevsrevs

Not enough room really mate, with it being side exit, it could be done I think, we will try this first, then if still no good got no choice but to re think exhaust, got a decibel devil coming for the main box too,
Cheers rog

crazycage

ive seen really small silencers for screamer pipes ill see if i can find them .

nevsrevs

Nice 1

Sonic Boom

iTrader: (11)

Was that after you had spoken to Paul, Ronnie?
I love the RC6's best pad i've ever had.
Rich