grpa spec / wrc look escort cosworth track car with 700bhp 2.2 harvey gibbs engine
#41
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2007
Location: ballymoney co"antrim northern ireland
Posts: 1,092
Likes: 0
Received 3 Likes
on
3 Posts
jim have you any photos of my engine build so far mate, would you post them up here and on the escort site please if possable.
many thanks steven
many thanks steven
#43
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2007
Location: ballymoney co"antrim northern ireland
Posts: 1,092
Likes: 0
Received 3 Likes
on
3 Posts
wrc front bumber all fitted up made quick release
took a lot of hard work to get it fitted and all the gaps nice, was useing std head lights at the time as i hadnt got my twin lights.
thanks steven
took a lot of hard work to get it fitted and all the gaps nice, was useing std head lights at the time as i hadnt got my twin lights.
thanks steven
#46
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2007
Location: ballymoney co"antrim northern ireland
Posts: 1,092
Likes: 0
Received 3 Likes
on
3 Posts
atl bag tank / and fuel swirl pot all fuel lines ect fitted up to the bulk head, pro alloy water injection and wind screen washer water tank fitted
thanks steven
thanks steven
#50
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2007
Location: ballymoney co"antrim northern ireland
Posts: 1,092
Likes: 0
Received 3 Likes
on
3 Posts
this is a photo of my old 2lt 680bhp harvey gibbs engine but its ded now due to bad fuel , i was sad for a day or two but i ordered a all singing and all danceing 2.2 lt stroker full race harvey gibbs engine to fill the space so i am well happy now,
it should be ready to collect the end of this week , harveys away on his jollys so wateing on him to get back on monday.
jimbo no tea brakes for your dad to my engines finished lol
thanks steven
it should be ready to collect the end of this week , harveys away on his jollys so wateing on him to get back on monday.
jimbo no tea brakes for your dad to my engines finished lol
thanks steven
Last edited by steven mc kay; 21-05-2011 at 07:16 PM.
#58
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2007
Location: ballymoney co"antrim northern ireland
Posts: 1,092
Likes: 0
Received 3 Likes
on
3 Posts
hi mark , what you up to dude, did you get your new trailer yet.
i sold your rs3 already , i baught a daf lf 45 tilt and slide recovery lorry, 7.5ton, i am starting to buy and sell vans and do 24hr recovery , so lorry will do it all ..
my dads doeing the days and i will do the nights as i am also still fitting carpet .
thanks steven
#59
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2007
Location: ballymoney co"antrim northern ireland
Posts: 1,092
Likes: 0
Received 3 Likes
on
3 Posts
it took a very long time to find some of the parts , very hard to get.
at first i had tarmac mag up rights as i couldnt get any gravel ones . now i have gravel fitted to the car.
thanks steven
#62
Too many posts.. I need a life!!
iTrader: (3)
Join Date: Nov 2009
Location: suffolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Hi you are doing a proper build there I could only dream of having that engine and gearbox/diffs I all so do 7 days a week and 14 hours a day but I well never get close to your part list!!!
Did you get the parts off Tony and Tim
Did you get the parts off Tony and Tim
#64
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2007
Location: ballymoney co"antrim northern ireland
Posts: 1,092
Likes: 0
Received 3 Likes
on
3 Posts
i am a flooring contractor , before the down turn in work i had 4 men and my self fitting 6 to 7 days per week 90 hrs+ per week , i had 11 years like that , now i am on my own fitting with one man workin for me , works a lot slower here in northern ireland , if it had allways been like this i would not have a good parts list or the spec of a car that i have, i have started selling vans and doeing 24hr recovery as a second job. also i work odd nights learning body repairs ( means i can repair my own vans i am selling)
yes i no tony conway and tim gore very well, i am talkin to tim almost every week at some point, all my grpa / wrc parts came from them.
thanks steven
#76
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2007
Location: ballymoney co"antrim northern ireland
Posts: 1,092
Likes: 0
Received 3 Likes
on
3 Posts
hi andy, there was a track day today at kirkistown but i have no engine, i hope to get to the next track day in 1 months time, theres a trackday every month with track skills . hows you andy what you at this weather? you up at the north west on satuartay? it was a very wet day i think they only ran 1 race . thanks steven
#78
Lars@carboncossie.com
Join Date: Jan 2008
Location: Sweden
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
#80
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2007
Location: ballymoney co"antrim northern ireland
Posts: 1,092
Likes: 0
Received 3 Likes
on
3 Posts
front proflex grpa tarmac suspenion, with grpa tarmac mag uprights/hubs
the car now runs the wrc gravel uprights instead.
thanks steven
the car now runs the wrc gravel uprights instead.
thanks steven