My 2wd saff cossie project 28/5/13 PICS!
#241
Lukesville
iTrader: (2)
Looking good Jimbo
Where are the special holders you made for your drive shafts Think i may have to do another set of shafts for mine as i chose the wrong colour and yours look better, lol.
Let me know when the diff is done and I can collect if you need as not too far from Bara..
Where are the special holders you made for your drive shafts Think i may have to do another set of shafts for mine as i chose the wrong colour and yours look better, lol.
Let me know when the diff is done and I can collect if you need as not too far from Bara..
#249
PassionFord Regular
download an FILL IN V888 Form and pay Ł5 a get all owners history and were car was first sold http://www.direct.gov.uk/prod_consum.../dg_065303.pdf Got mine back today took just over a week
Last edited by obrutsr09; 26-01-2011 at 07:28 PM.
#252
PassionFord Regular
#254
right after a long wait i finally got my finger out, this time its a big update and i must say im so friggin happy!
first thing first, huge thanks to my dad, bro, our own big_mike and another mate phil
huge help today and had a good laugh (mostly taking the piss )
well, i got my diff sorted (thanks to "pimp daddy" ) he sent me a standard diff to have my unit built into.
i had bought a little while back a titan plated 7.5" unit and outputs (thanks mitch!!!)
and had them both sent to bara, (another thanks!<) he had the casings blasted, bolts painted and built the unit in with new bearings seals etc. the works!
so that was ready, my drive shafts were done! getting there, so the last couple of weeks i have been doing my beam with our fabricator, were sooo busy with customers 6 degree beams he couldnt fit mine in but he watched over me whilst i did my own. To be fair i didnt do it all my own but i did alot and im happy, yet another massive thanks to jay, he wouldnt take a penny neither, what a diamond
so beams done, that went to blasting and powder coating with all my hubs, bearing carriers etc, and the bits i didnt powder coat (flanges) i painted in gloss black myself.
I sent a box of plating over and got that back late friday afternoon! so were ready to go,
got the beam built up with new rose joints, top hats, sleeve nuts etc, then slapped the diff in and bolted in with bufty bolts shafts on, hubs, bearing carriers, blah blah, just got it done!
unfortunately for the time being i had to put the standard diff mount and suspension that came with the car back on as im still undecided suspension wise and havnt got anything else!
anyways, enough blabbing heres the pics, to say im happy is an understatement!
and in!!!!!
and to finish, i LOVE this picture! LUSH
Jim
first thing first, huge thanks to my dad, bro, our own big_mike and another mate phil
huge help today and had a good laugh (mostly taking the piss )
well, i got my diff sorted (thanks to "pimp daddy" ) he sent me a standard diff to have my unit built into.
i had bought a little while back a titan plated 7.5" unit and outputs (thanks mitch!!!)
and had them both sent to bara, (another thanks!<) he had the casings blasted, bolts painted and built the unit in with new bearings seals etc. the works!
so that was ready, my drive shafts were done! getting there, so the last couple of weeks i have been doing my beam with our fabricator, were sooo busy with customers 6 degree beams he couldnt fit mine in but he watched over me whilst i did my own. To be fair i didnt do it all my own but i did alot and im happy, yet another massive thanks to jay, he wouldnt take a penny neither, what a diamond
so beams done, that went to blasting and powder coating with all my hubs, bearing carriers etc, and the bits i didnt powder coat (flanges) i painted in gloss black myself.
I sent a box of plating over and got that back late friday afternoon! so were ready to go,
got the beam built up with new rose joints, top hats, sleeve nuts etc, then slapped the diff in and bolted in with bufty bolts shafts on, hubs, bearing carriers, blah blah, just got it done!
unfortunately for the time being i had to put the standard diff mount and suspension that came with the car back on as im still undecided suspension wise and havnt got anything else!
anyways, enough blabbing heres the pics, to say im happy is an understatement!
and in!!!!!
and to finish, i LOVE this picture! LUSH
Jim
#267
Cheers boys glad you approve
James, loooooads to do yet mate,
The thunder saloon came in five years back and hasn't left, no idea why, guy dosnt contact iirc we just push it out in the morning and in at night
It's a proper tool though, proper ally uprights etc, 12/13 inch wide rims 9 inch diff, getrak box, was 500hp engine. If we ever do it hes having 650 bhp with sequential box
James, loooooads to do yet mate,
The thunder saloon came in five years back and hasn't left, no idea why, guy dosnt contact iirc we just push it out in the morning and in at night
It's a proper tool though, proper ally uprights etc, 12/13 inch wide rims 9 inch diff, getrak box, was 500hp engine. If we ever do it hes having 650 bhp with sequential box
#268
Regular Contributor
Her names 'Sarah The Sierra'
#270
Wahay!! I've lost my Virginity!!
Join Date: Oct 2009
Location: North West
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
#272
Wahay!! I've lost my Virginity!!
Join Date: Oct 2009
Location: North West
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
No i didnt, after waiting 6 years for your update i just scrolled down to look at the pics
I have just sold some as new gaz gold you could of had them if you would of asked, guess what i have a box full of thats on its way to you monday
I have just sold some as new gaz gold you could of had them if you would of asked, guess what i have a box full of thats on its way to you monday