S2 rs turbo resto, **LET THE DETAILING BEGIN!!!!**
#282
#285
Thread Starter
PassionFord Post Whore!!
iTrader: (4)
Joined: Aug 2009
Posts: 4,790
Likes: 43
From: London
Thanks for all your comments lads, kind words indeed. Im trying to get it done but i will be camping at central day this year either way! So i'll see you Brams there.
I did promise a proper update, but i think that will be tomorrow.
Here are a few more pics
Cheer again
Rob,
I did promise a proper update, but i think that will be tomorrow.
Here are a few more pics
Cheer again
Rob,
#287
Thread Starter
PassionFord Post Whore!!
iTrader: (4)
Joined: Aug 2009
Posts: 4,790
Likes: 43
From: London
Yes mate, first time its been on the floor for over a year! Still a fair bit to do though,
Brakes
Ecu wiring
Rad and intercooler plus all pipe work
Interior
shorter list than a few months ago, but nothings ever quick or simple with this car
Rob,
Brakes
Ecu wiring
Rad and intercooler plus all pipe work
Interior
shorter list than a few months ago, but nothings ever quick or simple with this car
Rob,
#296
Looks cracking squire.
Need to get myself some black Roose boost hoses when I get a chance & money, looks much nearer than the blue sfs uns i have on at the minute!
Need to get myself some black Roose boost hoses when I get a chance & money, looks much nearer than the blue sfs uns i have on at the minute!
#299
Thread Starter
PassionFord Post Whore!!
iTrader: (4)
Joined: Aug 2009
Posts: 4,790
Likes: 43
From: London
Thanks for all the kind comments, but im slacking! photo's are piling up!
Interior and a few nice gauges are going in this weekend, so should be a good time to put some up!
Lol, me neither! when i get a chance i will get one blasted and zinc plated
I did indeed mate, i was with the moonstone blue saph, imperial blue st200, zetec-s and parked next to a lotus/3door.
I kept a lookout for yours and your brothers 3 door but must have missed you both
I'll have to give you my number next time matey, go and have a beer and a natter
Rob,
Interior and a few nice gauges are going in this weekend, so should be a good time to put some up!
Lol, me neither! when i get a chance i will get one blasted and zinc plated
Alright rob didnt see you at pod did you camp and its about time you got it started
I kept a lookout for yours and your brothers 3 door but must have missed you both
I'll have to give you my number next time matey, go and have a beer and a natter
Rob,
#302
Come on, lets have an update!
Looks really really good and looks like it is a perfect modern usable setup running EFI etc. and if it runs reasonable boost should be reliable and go for years
I've said it once, but very well done!
Looks really really good and looks like it is a perfect modern usable setup running EFI etc. and if it runs reasonable boost should be reliable and go for years
I've said it once, but very well done!
#304
Thread Starter
PassionFord Post Whore!!
iTrader: (4)
Joined: Aug 2009
Posts: 4,790
Likes: 43
From: London
Once again cheers for all the comments
Re made some brake pipes i wasn't happy with a few weeks ago,
All painted and on the car now..
Car is driving
And it genuinely drives like a new car, so chuffed with it. Minus the exhaust that seems to have a baffle come loose so rattles on tickover. Took it for a quick spin after the tracking was sorted (over 2inches of toe in ).
On to some detailing.
Re made some brake pipes i wasn't happy with a few weeks ago,
All painted and on the car now..
Car is driving
And it genuinely drives like a new car, so chuffed with it. Minus the exhaust that seems to have a baffle come loose so rattles on tickover. Took it for a quick spin after the tracking was sorted (over 2inches of toe in ).
On to some detailing.
#305
Thread Starter
PassionFord Post Whore!!
iTrader: (4)
Joined: Aug 2009
Posts: 4,790
Likes: 43
From: London
Some products used,
Few before pics,
The paint work has taken a bit of a beating through out this resto, it will be respayed next year, but a detail should help it look a little happier on the out side.
On to some snow foam fun
Whilst that was doing its shit, the wheels had a quick clean with the bilberry pro valet wheel cleaner, pretty dilute as the wheels are essentially new.
The car was then jet washed down and re snow foamed
The wheels were given a final wipe down, then the car was washed using a bucket of clean water, a natural sponge and a little auto gleam pain conditioner. The bucket was really just there to clean the sponge between wipes.
Rinsed
And some 0000 wire wool to clean the exhaust
Mid clean, wheel cleaner and the wire wool
The car and wheels were then dried, using a microfiber chamois.
To continue......
Few before pics,
The paint work has taken a bit of a beating through out this resto, it will be respayed next year, but a detail should help it look a little happier on the out side.
On to some snow foam fun
Whilst that was doing its shit, the wheels had a quick clean with the bilberry pro valet wheel cleaner, pretty dilute as the wheels are essentially new.
The car was then jet washed down and re snow foamed
The wheels were given a final wipe down, then the car was washed using a bucket of clean water, a natural sponge and a little auto gleam pain conditioner. The bucket was really just there to clean the sponge between wipes.
Rinsed
And some 0000 wire wool to clean the exhaust
Mid clean, wheel cleaner and the wire wool
The car and wheels were then dried, using a microfiber chamois.
To continue......
Last edited by Rob_DOHC; 07-05-2011 at 08:47 PM.
#307
Thread Starter
PassionFord Post Whore!!
iTrader: (4)
Joined: Aug 2009
Posts: 4,790
Likes: 43
From: London
Next up the car was clayed,
After literally a few wipes
Clayed bonnet
After claying half the car
Nice...
Car all clayed, nice and smooth, onto some polish,
The back wing had a very quick machine polish, before it started to rain
Then a random shot, showing my clean exhaust, brake lights that are on all the time and fooked spoiler lol
Toying with fitting some amber rear lights to go with the fronts.... we shall see.
Finish polishing tomorrow, then some lime prime lite, then some dodo orance crush.
Should be pretty shiny!
Cheers for now
Rob,
After literally a few wipes
Clayed bonnet
After claying half the car
Nice...
Car all clayed, nice and smooth, onto some polish,
The back wing had a very quick machine polish, before it started to rain
Then a random shot, showing my clean exhaust, brake lights that are on all the time and fooked spoiler lol
Toying with fitting some amber rear lights to go with the fronts.... we shall see.
Finish polishing tomorrow, then some lime prime lite, then some dodo orance crush.
Should be pretty shiny!
Cheers for now
Rob,
Last edited by Rob_DOHC; 07-05-2011 at 08:53 PM.
#311
Thread Starter
PassionFord Post Whore!!
iTrader: (4)
Joined: Aug 2009
Posts: 4,790
Likes: 43
From: London
Cheers beef, if i can i will!
I take it you'll be there with k and every one?
quick preview of the finished article, not quite 100% but not bad for a first attempt, was a bit worried about going through paint so i might try again later!
Loads more pics to post up tomorrow but its time for bed
Rob,
I take it you'll be there with k and every one?
quick preview of the finished article, not quite 100% but not bad for a first attempt, was a bit worried about going through paint so i might try again later!
Loads more pics to post up tomorrow but its time for bed
Rob,
Last edited by Rob_DOHC; 09-05-2011 at 10:01 PM.
#315
looks well nice mate. cant wait for mine to look like half a car again. underside clean ups are a bitch. soon as i get that done i can move swiftly on to sorting the map out.
look forward to more pics.
look forward to more pics.
#318
Thread Starter
PassionFord Post Whore!!
iTrader: (4)
Joined: Aug 2009
Posts: 4,790
Likes: 43
From: London
Cheers guys,
The car is MOT'd and on the road. Just mapping it at the moment, 600 miles and 12psi. So far its going better than it was at nearly 18psi last time and thats with the same stock cam.
I desperately need an hour to properly update the thread but here are some random shots from the phone.
The girl friend bought me a DSLR for my birthday so expect some more decent pics soon
Rob,
The car is MOT'd and on the road. Just mapping it at the moment, 600 miles and 12psi. So far its going better than it was at nearly 18psi last time and thats with the same stock cam.
I desperately need an hour to properly update the thread but here are some random shots from the phone.
The girl friend bought me a DSLR for my birthday so expect some more decent pics soon
Rob,