REYLAND Escort - Version 2!! - updated P20
06-04-2006, 07:33 PM
#649
Advanced PassionFord User
Join Date: Oct 2003
Location: essex
Posts: 1,985
Likes: 0
Received 0 Likes
on
0 Posts
09-04-2006, 05:37 PM
#651
Advanced PassionFord User
Join Date: Nov 2005
Location: staffs
Posts: 2,234
Likes: 0
Received 0 Likes
on
0 Posts
THEM WHEELS ARE FRUKIN PHATPHATPHAT!!!!!!!!!!!!!!!!!!!!!THAT TAIL BOV IS WANK MIND BUT FOUKIN HELL THAT CAR IS PHAT !!!!I WOULD PAINT IT A LAIRY PINK OR GREEN MIND.
09-04-2006, 05:47 PM
#652
10K+ Poster!!
Originally Posted by sapphirecossie
THEM WHEELS ARE FRUKIN PHATPHATPHAT!!!!!!!!!!!!!!!!!!!!!THAT TAIL BOV IS WANK MIND BUT FOUKIN HELL THAT CAR IS PHAT !!!!I WOULD PAINT IT A LAIRY PINK OR GREEN MIND.
12-04-2006, 08:10 AM
#653
Regular Contributor
Martin,
Nice bit of gear.
What cambelt are you using ?
I looked at doing a tall block for my stroker YB a while back but couldn't find a belt in Oz of suitable additional length.
Nice bit of gear.
What cambelt are you using ?
I looked at doing a tall block for my stroker YB a while back but couldn't find a belt in Oz of suitable additional length.
Originally Posted by martin-reyland
ok... for those interested.
the millington engine had a 8mm taller block but even that is not ideal for what i wanted so i had to make my block taller. in simple terms i have added a spacer on top of a 200 block and then linered through both parts...ping, tall block! now all that seems simple but believe me it's not, there's a lot to consider!
for the moment here's what i want to reveal about the new donkey....
* the rods are just under an inch longer than standard
the millington engine had a 8mm taller block but even that is not ideal for what i wanted so i had to make my block taller. in simple terms i have added a spacer on top of a 200 block and then linered through both parts...ping, tall block! now all that seems simple but believe me it's not, there's a lot to consider!
for the moment here's what i want to reveal about the new donkey....
* the rods are just under an inch longer than standard
16-04-2006, 02:50 PM
#655
Advanced PassionFord User
Join Date: May 2004
Location: Dartford, Kent
Posts: 1,727
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jsa
Martin,
Nice bit of gear.
What cambelt are you using ?
I looked at doing a tall block for my stroker YB a while back but couldn't find a belt in Oz of suitable additional length.
Nice bit of gear.
What cambelt are you using ?
I looked at doing a tall block for my stroker YB a while back but couldn't find a belt in Oz of suitable additional length.
Originally Posted by martin-reyland
ok... for those interested.
the millington engine had a 8mm taller block but even that is not ideal for what i wanted so i had to make my block taller. in simple terms i have added a spacer on top of a 200 block and then linered through both parts...ping, tall block! now all that seems simple but believe me it's not, there's a lot to consider!
for the moment here's what i want to reveal about the new donkey....
* the rods are just under an inch longer than standard
the millington engine had a 8mm taller block but even that is not ideal for what i wanted so i had to make my block taller. in simple terms i have added a spacer on top of a 200 block and then linered through both parts...ping, tall block! now all that seems simple but believe me it's not, there's a lot to consider!
for the moment here's what i want to reveal about the new donkey....
* the rods are just under an inch longer than standard
im sure it was mentioned somewhere it was a citroen xantia one, not sure how true that is though
17-04-2006, 11:05 AM
#658
PassionFord Post Whore!!
Join Date: Jul 2005
Posts: 6,430
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by martin-reyland
Originally Posted by stu21t
there must be an update after this bank holiday
please?
lol
please?
lol
Can't wait to see it at croft if your still going?
18-04-2006, 12:56 AM
#659
Regular Contributor
Thanks JR, found it.
https://passionford.com/forum/viewto...ntia&start=280
im sure it was mentioned somewhere it was a citroen xantia one, not sure how true that is though
https://passionford.com/forum/viewto...ntia&start=280
im sure it was mentioned somewhere it was a citroen xantia one, not sure how true that is though
18-04-2006, 09:15 PM
#665
Advanced PassionFord User
iTrader: (1)
Join Date: Feb 2005
Location: Norway
Posts: 2,196
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by martin-reyland
Originally Posted by JonnyBravo
Awesome Martin.
Is that the clocks out of your old Escort I can see ?
Hows the front end looking now, surely thats nearly done
Is that the clocks out of your old Escort I can see ?
Hows the front end looking now, surely thats nearly done
the metro has now been sold, so no chance there either.
18-04-2006, 09:28 PM
#671
PassionFord Post Whore!!
Join Date: Apr 2004
Location: Warsaw, Poland
Posts: 5,343
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by martin-reyland
Originally Posted by Azrael
Looks ....fast...
I know, but pics only show that.
So far....
Will probably mindblowingly fast
18-04-2006, 09:59 PM
#673
I've found that life I needed.. It's HERE!!
Join Date: Jul 2004
Location: Cumbria/Preston
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
The blue/black fittings all look very nice back there, good to see a change from the red/blue every now and then. Looking good all round!
