Project Tango - Fiesta ITB'd Track Car, Caged and Carbon'd
#1
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Hey guys, thought I would share my current project with you over here, quite a condensed version, full project is over on ZSOC.
I bought the car in December 2008 with the following spec:
Black Phase 1 ZS, 85k on shell, 5kish on new engine
Shawspeed SS4 Cams, Heavy duty valve springs and big end bolts on Phase 2 engine
Full Miltek system - 4-2-1, Decat and Cat-Back
300mm ST170 front conversion and Focus 255mm rear conversion
16" OZ Ultra Leggera's
Stripped interior including sound deadening removed
Fomex door cards
Cobra Monaco seats and Luke 3 Point Harnesses
Rear strut brace and harness bar
Area 6 Camber Adjustable lower arms
Full Powerflex bush kit
Spax PSX Suspension kit
And here's a few pics of it just after I got it:
![Name: Picture265.jpg
Views: 214
Size: 82.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120657d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture265.jpg)
![Name: Picture253.jpg
Views: 206
Size: 82.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120658d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture253.jpg)
![Name: Picture255.jpg
Views: 264
Size: 86.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120659d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture255.jpg)
![Name: Picture256.jpg
Views: 222
Size: 88.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120660d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture256.jpg)
![Name: Picture258.jpg
Views: 176
Size: 120.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120661d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture258.jpg)
![Name: Picture257.jpg
Views: 173
Size: 77.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120662d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture257.jpg)
My plans when I got the car were:
Plans for the future
> Re-scheme the colouring to a new theme
> Fit new seats (To be revealed)
> Overhaul interior including flocked dash, guages and maybe a cage
> Change wheels to a Motorsport 15" Wheel (required to clear the brakes)
> Further engine work - Live Map, raised rev limit and then looking at Throttle Bodies next year
> Transmission upgrade to LSD IB5 Box, Helix Clutch and lightened flywheel
> Carbon fibre
I bought the car in December 2008 with the following spec:
Black Phase 1 ZS, 85k on shell, 5kish on new engine
Shawspeed SS4 Cams, Heavy duty valve springs and big end bolts on Phase 2 engine
Full Miltek system - 4-2-1, Decat and Cat-Back
300mm ST170 front conversion and Focus 255mm rear conversion
16" OZ Ultra Leggera's
Stripped interior including sound deadening removed
Fomex door cards
Cobra Monaco seats and Luke 3 Point Harnesses
Rear strut brace and harness bar
Area 6 Camber Adjustable lower arms
Full Powerflex bush kit
Spax PSX Suspension kit
And here's a few pics of it just after I got it:
![Name: Picture265.jpg
Views: 214
Size: 82.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120657d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture265.jpg)
![Name: Picture253.jpg
Views: 206
Size: 82.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120658d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture253.jpg)
![Name: Picture255.jpg
Views: 264
Size: 86.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120659d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture255.jpg)
![Name: Picture256.jpg
Views: 222
Size: 88.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120660d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture256.jpg)
![Name: Picture258.jpg
Views: 176
Size: 120.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120661d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture258.jpg)
![Name: Picture257.jpg
Views: 173
Size: 77.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120662d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture257.jpg)
My plans when I got the car were:
Plans for the future
> Re-scheme the colouring to a new theme
> Fit new seats (To be revealed)
> Overhaul interior including flocked dash, guages and maybe a cage
> Change wheels to a Motorsport 15" Wheel (required to clear the brakes)
> Further engine work - Live Map, raised rev limit and then looking at Throttle Bodies next year
> Transmission upgrade to LSD IB5 Box, Helix Clutch and lightened flywheel
> Carbon fibre
Last edited by Wardy ZS; 21-09-2011 at 06:13 PM.
#2
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
First mod was new lights:
Before
![Name: Picture279.jpg
Views: 201
Size: 75.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120663d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture279.jpg)
After
![Name: Picture270.jpg
Views: 198
Size: 75.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120664d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture270.jpg)
Usually everyone does it the other way, de-tango's and smoke's the lights, but personally I think TANGO is so much better.
Next up I decided to invest in some PROPER seats, sue cue some sexy Sparco seats:
![Name: Picture280.jpg
Views: 189
Size: 58.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120665d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture280.jpg)
Evo L for Passengers
![Name: Picture277.jpg
Views: 169
Size: 59.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120666d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture277.jpg)
Pro 2000 Carbon Fibre for me, these seats came up at a bargin price, and I'm so glad I bought them, they are so much more comfortable than my old Cobra Monacos.
I then wanted some proper harnesses to go with the seats, and after getting them, i could never go back to 2" straps, here's what I opted for:
![Name: Picture275372.jpg
Views: 170
Size: 77.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120667d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture275372.jpg)
![Name: Picture275374.jpg
Views: 173
Size: 75.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120668d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture275374.jpg)
3" TRS Magnum's in ORANGE, this was the start of the TANGO theme.
Anyways, over the next few weeks got them all in:
![Name: Picture275380.jpg
Views: 165
Size: 64.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120669d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture275380.jpg)
Before
![Name: Picture279.jpg
Views: 201
Size: 75.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120663d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture279.jpg)
After
![Name: Picture270.jpg
Views: 198
Size: 75.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120664d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture270.jpg)
Usually everyone does it the other way, de-tango's and smoke's the lights, but personally I think TANGO is so much better.
Next up I decided to invest in some PROPER seats, sue cue some sexy Sparco seats:
![Name: Picture280.jpg
Views: 189
Size: 58.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120665d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture280.jpg)
Evo L for Passengers
![Name: Picture277.jpg
Views: 169
Size: 59.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120666d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture277.jpg)
Pro 2000 Carbon Fibre for me, these seats came up at a bargin price, and I'm so glad I bought them, they are so much more comfortable than my old Cobra Monacos.
I then wanted some proper harnesses to go with the seats, and after getting them, i could never go back to 2" straps, here's what I opted for:
![Name: Picture275372.jpg
Views: 170
Size: 77.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120667d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture275372.jpg)
![Name: Picture275374.jpg
Views: 173
Size: 75.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120668d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture275374.jpg)
3" TRS Magnum's in ORANGE, this was the start of the TANGO theme.
Anyways, over the next few weeks got them all in:
![Name: Picture275380.jpg
Views: 165
Size: 64.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120669d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture275380.jpg)
![Name: Picture275384.jpg
Views: 162
Size: 31.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120670d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture275384.jpg)
#3
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
When I got the car, the tyres were SHAGGED, so after pricing the tyres up for 16" wheels, I decided to get new wheels instead, just so happened these came up at a bargin price:
![Name: Picture2dfh62.jpg
Views: 172
Size: 42.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120671d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture2dfh62.jpg)
![Name: Pictdghure263.jpg
Views: 217
Size: 54.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120672d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-pictdghure263.jpg)
Compomotive TH's in 15" flavour, really wanted Comps, as they wernt many wheels that would clear the 300mm brake conversion without modifying the calipers. So got them fitted with a set of Michelin Pilot Exaclto's and here they are:
![Name: Picture275371.jpg
Views: 183
Size: 69.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120673d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture275371.jpg)
In the meantime I added an Orange sunstrip, and debatable TOW stickers:
![Name: Picture275385.jpg
Views: 194
Size: 41.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120674d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture275385.jpg)
![Name: S1031535.jpg
Views: 192
Size: 101.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120675d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-s1031535.jpg)
Next fitted an aftermarket limiter, and pre-mapped chip to raise the limit and run the cams better:
![Name: IMG_0271.jpg
Views: 167
Size: 86.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120676d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0271.jpg)
![Name: Picture2dfh62.jpg
Views: 172
Size: 42.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120671d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture2dfh62.jpg)
![Name: Pictdghure263.jpg
Views: 217
Size: 54.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120672d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-pictdghure263.jpg)
Compomotive TH's in 15" flavour, really wanted Comps, as they wernt many wheels that would clear the 300mm brake conversion without modifying the calipers. So got them fitted with a set of Michelin Pilot Exaclto's and here they are:
![Name: Picture275371.jpg
Views: 183
Size: 69.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120673d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture275371.jpg)
In the meantime I added an Orange sunstrip, and debatable TOW stickers:
![Name: Picture275385.jpg
Views: 194
Size: 41.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120674d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture275385.jpg)
![Name: S1031535.jpg
Views: 192
Size: 101.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120675d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-s1031535.jpg)
Next fitted an aftermarket limiter, and pre-mapped chip to raise the limit and run the cams better:
![Name: IMG_0271.jpg
Views: 167
Size: 86.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120676d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0271.jpg)
![Name: IMG_0272.jpg
Views: 192
Size: 57.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120677d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0272.jpg)
#4
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I then decided to re-spray the Comps, as they looked out of place on the car, brave move to rub down a set of 6 week old, limited edition wheels, but it was worth it:
![Name: 2009_0203Feb20090102.jpg
Views: 175
Size: 98.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120678d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-2009_0203feb20090102.jpg)
![Name: 2009_0203Feb20090109.jpg
Views: 177
Size: 105.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120679d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-2009_0203feb20090109.jpg)
![Name: 2009_0203Feb20090100.jpg
Views: 173
Size: 100.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120680d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-2009_0203feb20090100.jpg)
I also sprayed the mirrors orange and tow eyes aswell, and lost the GASH orange sunstrip.
I then fitted an OMP wheel, as the standard one was horrible, and needed some dish in my life:
Before
![Name: Picture018.jpg
Views: 169
Size: 53.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120681d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture018.jpg)
After
![Name: Picture032.jpg
Views: 169
Size: 61.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120682d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture032.jpg)
Then cleaned under the "hood":
![Name: DSCF2572.jpg
Views: 167
Size: 95.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120683d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf2572.jpg)
![Name: After.jpg
Views: 242
Size: 91.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120684d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-after.jpg)
Then had it RR'd at RS Tuning in Leeds, pretty pleased with the outcome as it was still running a standard Ford map:
![Name: Picture160.jpg
Views: 170
Size: 64.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120685d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture160.jpg)
![Name: Picture162.jpg
Views: 178
Size: 49.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120686d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture162.jpg)
![Name: Picture079.jpg
Views: 164
Size: 84.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120687d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture079.jpg)
Also gave it a service before to make sure it was running sweet.
![Name: 2009_0203Feb20090102.jpg
Views: 175
Size: 98.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120678d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-2009_0203feb20090102.jpg)
![Name: 2009_0203Feb20090109.jpg
Views: 177
Size: 105.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120679d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-2009_0203feb20090109.jpg)
![Name: 2009_0203Feb20090100.jpg
Views: 173
Size: 100.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120680d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-2009_0203feb20090100.jpg)
I also sprayed the mirrors orange and tow eyes aswell, and lost the GASH orange sunstrip.
I then fitted an OMP wheel, as the standard one was horrible, and needed some dish in my life:
Before
![Name: Picture018.jpg
Views: 169
Size: 53.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120681d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture018.jpg)
After
![Name: Picture032.jpg
Views: 169
Size: 61.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120682d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture032.jpg)
Then cleaned under the "hood":
![Name: DSCF2572.jpg
Views: 167
Size: 95.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120683d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf2572.jpg)
![Name: After.jpg
Views: 242
Size: 91.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120684d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-after.jpg)
Then had it RR'd at RS Tuning in Leeds, pretty pleased with the outcome as it was still running a standard Ford map:
![Name: Picture160.jpg
Views: 170
Size: 64.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120685d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture160.jpg)
![Name: Picture162.jpg
Views: 178
Size: 49.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120686d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture162.jpg)
![Name: Picture079.jpg
Views: 164
Size: 84.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120687d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-picture079.jpg)
Also gave it a service before to make sure it was running sweet.
#6
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Next up added some more orange, handles and spoiler:
![Name: car3.jpg
Views: 189
Size: 84.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120688d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-car3.jpg)
Changed the brakes
![Name: DSCF3084.jpg
Views: 219
Size: 114.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120689d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3084.jpg)
Added an Upper strut brace
![Name: DSCF3175.jpg
Views: 182
Size: 130.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120690d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3175.jpg)
And slightly lightened and trimmed a spare dash for flocking:
![Name: DSCF3163.jpg
Views: 168
Size: 99.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120691d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3163.jpg)
And picked up an RST box with LSD:
![Name: DSCF3258.jpg
Views: 163
Size: 69.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120692d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3258.jpg)
And new door cards:
![Name: DSCF3248.jpg
Views: 173
Size: 84.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120693d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3248.jpg)
![Name: car3.jpg
Views: 189
Size: 84.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120688d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-car3.jpg)
Changed the brakes
![Name: DSCF3084.jpg
Views: 219
Size: 114.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120689d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3084.jpg)
Added an Upper strut brace
![Name: DSCF3175.jpg
Views: 182
Size: 130.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120690d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3175.jpg)
And slightly lightened and trimmed a spare dash for flocking:
![Name: DSCF3163.jpg
Views: 168
Size: 99.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120691d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3163.jpg)
And picked up an RST box with LSD:
![Name: DSCF3258.jpg
Views: 163
Size: 69.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120692d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3258.jpg)
And new door cards:
![Name: DSCF3248.jpg
Views: 173
Size: 84.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120693d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3248.jpg)
![Name: DSCF3249.jpg
Views: 239
Size: 42.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120694d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3249.jpg)
#7
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
And then my B-Tech Racing stickers:
![Name: DSCF3266.jpg
Views: 180
Size: 108.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120695d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3266.jpg)
![Name: DSCF3269.jpg
Views: 175
Size: 107.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120696d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3269.jpg)
Recieved back all my flocked parts from AUTO FLOCK
![Name: DSCF3278.jpg
Views: 186
Size: 170.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120697d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3278.jpg)
![Name: DSCF3286.jpg
Views: 176
Size: 70.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120698d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3286.jpg)
And got it all in for FITP:
![Name: DSCF3369.jpg
Views: 162
Size: 104.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120699d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3369.jpg)
![Name: DSCF3350.jpg
Views: 177
Size: 114.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120700d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3350.jpg)
By this time I'd manage to ruin my diff, so made getting the RST LSD done more important, I also sourced a helix clutch, lightened fly and a few other bits to do at the same time.
![Name: DSCF3827.jpg
Views: 175
Size: 92.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120701d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3827.jpg)
![Name: DSCF3825.jpg
Views: 180
Size: 82.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120702d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3825.jpg)
![Name: DSCF3823.jpg
Views: 178
Size: 81.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120703d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3823.jpg)
New IB5 back with LSD fitted, and painted up:
![Name: DSCF3266.jpg
Views: 180
Size: 108.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120695d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3266.jpg)
![Name: DSCF3269.jpg
Views: 175
Size: 107.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120696d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3269.jpg)
Recieved back all my flocked parts from AUTO FLOCK
![Name: DSCF3278.jpg
Views: 186
Size: 170.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120697d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3278.jpg)
![Name: DSCF3286.jpg
Views: 176
Size: 70.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120698d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3286.jpg)
And got it all in for FITP:
![Name: DSCF3369.jpg
Views: 162
Size: 104.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120699d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3369.jpg)
![Name: DSCF3350.jpg
Views: 177
Size: 114.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120700d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3350.jpg)
By this time I'd manage to ruin my diff, so made getting the RST LSD done more important, I also sourced a helix clutch, lightened fly and a few other bits to do at the same time.
![Name: DSCF3827.jpg
Views: 175
Size: 92.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120701d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3827.jpg)
![Name: DSCF3825.jpg
Views: 180
Size: 82.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120702d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3825.jpg)
![Name: DSCF3823.jpg
Views: 178
Size: 81.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120703d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3823.jpg)
New IB5 back with LSD fitted, and painted up:
![Name: IMG_0399.jpg
Views: 169
Size: 89.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120704d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0399.jpg)
Trending Topics
#8
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Next up came the bargin of the century, a set of LEDA coilovers from an old Mk3 Racecar, I couldnt pass up the opporunity to have these:
![Name: IMG_0365.jpg
Views: 172
Size: 69.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120705d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0365.jpg)
Meant I had to change the beam to a fork mounted one, but took it as an opportunity to really clean it all up:
![Name: IMG_0373.jpg
Views: 183
Size: 86.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120706d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0373.jpg)
Shock done, and the beam before:
![Name: IMG_0379.jpg
Views: 179
Size: 127.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120707d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0379.jpg)
After
![Name: IMG_0378.jpg
Views: 186
Size: 124.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120708d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0378.jpg)
Difference in shock sizes.
![Name: IMG_0380.jpg
Views: 172
Size: 174.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120709d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0380.jpg)
When I put the LEDA's on, I had them only about 1/3 wound down and this happened
![Name: IMG_0381.jpg
Views: 172
Size: 91.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120710d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0381.jpg)
Next up was to fit the new box
![Name: DSCF4001.jpg
Views: 179
Size: 107.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120711d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4001.jpg)
Replaced the crank seal as a precaution:
![Name: DSCF4014.jpg
Views: 203
Size: 122.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120712d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4014.jpg)
Old and new flywheel
![Name: DSCF4003.jpg
Views: 186
Size: 160.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120713d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4003.jpg)
Hard at work
![Name: DSCF3997.jpg
Views: 202
Size: 117.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120714d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3997.jpg)
End of day one
![Name: DSCF4028.jpg
Views: 180
Size: 105.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120715d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4028.jpg)
![Name: DSCF4015.jpg
Views: 173
Size: 89.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120716d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4015.jpg)
![Name: IMG_0365.jpg
Views: 172
Size: 69.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120705d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0365.jpg)
Meant I had to change the beam to a fork mounted one, but took it as an opportunity to really clean it all up:
![Name: IMG_0373.jpg
Views: 183
Size: 86.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120706d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0373.jpg)
Shock done, and the beam before:
![Name: IMG_0379.jpg
Views: 179
Size: 127.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120707d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0379.jpg)
After
![Name: IMG_0378.jpg
Views: 186
Size: 124.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120708d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0378.jpg)
Difference in shock sizes.
![Name: IMG_0380.jpg
Views: 172
Size: 174.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120709d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0380.jpg)
When I put the LEDA's on, I had them only about 1/3 wound down and this happened
![Name: IMG_0381.jpg
Views: 172
Size: 91.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120710d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0381.jpg)
Next up was to fit the new box
![Name: DSCF4001.jpg
Views: 179
Size: 107.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120711d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4001.jpg)
Replaced the crank seal as a precaution:
![Name: DSCF4014.jpg
Views: 203
Size: 122.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120712d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4014.jpg)
Old and new flywheel
![Name: DSCF4003.jpg
Views: 186
Size: 160.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120713d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4003.jpg)
Hard at work
![Name: DSCF3997.jpg
Views: 202
Size: 117.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120714d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf3997.jpg)
End of day one
![Name: DSCF4028.jpg
Views: 180
Size: 105.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120715d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4028.jpg)
![Name: DSCF4015.jpg
Views: 173
Size: 89.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120716d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4015.jpg)
![Name: DSCF4026.jpg
Views: 200
Size: 115.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120717d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4026.jpg)
#9
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Day 2
Fit sump back on
![Name: DSCF4031.jpg
Views: 178
Size: 80.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120718d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4031.jpg)
New fly on
![Name: DSCF4042.jpg
Views: 215
Size: 132.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120719d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4042.jpg)
![Name: DSCF4045.jpg
Views: 168
Size: 137.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120720d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4045.jpg)
Prep the box
![Name: DSCF4046.jpg
Views: 175
Size: 114.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120721d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4046.jpg)
![Name: DSCF4047.jpg
Views: 182
Size: 98.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120722d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4047.jpg)
Back together with a lower strut brace
![Name: DSCF4061.jpg
Views: 528
Size: 103.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120723d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4061.jpg)
And on all 4's again
![Name: DSCF4068.jpg
Views: 180
Size: 140.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120724d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4068.jpg)
And that brings me upto date with my project, done quite alot in 6 months or so thinking about it.
Next up is to get the car fully prepped and ready for mapping, sort the cam timing and get fuel pressure etc checked, so it's running 100% in time for it. I'm hoping to see around 150BHP once it's all mapped, and then get it corner weighted and geometry set up, and away we go off out on track!
Hope you enjoy the read, it's come on alot and I'm very happy with it now.
Full project thread can be found here:
http://www.zsoc.com/forum/showthread.php?t=130536
Cheers, Rob
Fit sump back on
![Name: DSCF4031.jpg
Views: 178
Size: 80.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120718d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4031.jpg)
New fly on
![Name: DSCF4042.jpg
Views: 215
Size: 132.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120719d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4042.jpg)
![Name: DSCF4045.jpg
Views: 168
Size: 137.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120720d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4045.jpg)
Prep the box
![Name: DSCF4046.jpg
Views: 175
Size: 114.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120721d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4046.jpg)
![Name: DSCF4047.jpg
Views: 182
Size: 98.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120722d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4047.jpg)
Back together with a lower strut brace
![Name: DSCF4061.jpg
Views: 528
Size: 103.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120723d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4061.jpg)
And on all 4's again
![Name: DSCF4068.jpg
Views: 180
Size: 140.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120724d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4068.jpg)
And that brings me upto date with my project, done quite alot in 6 months or so thinking about it.
Next up is to get the car fully prepped and ready for mapping, sort the cam timing and get fuel pressure etc checked, so it's running 100% in time for it. I'm hoping to see around 150BHP once it's all mapped, and then get it corner weighted and geometry set up, and away we go off out on track!
Hope you enjoy the read, it's come on alot and I'm very happy with it now.
Full project thread can be found here:
http://www.zsoc.com/forum/showthread.php?t=130536
Cheers, Rob
#12
Zetec S Owners
Join Date: Jan 2008
Location: South Yorkshire
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Looking good Rob! ![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
It looked gash with the wheels silver! I'll have to spray mine too sometime!
'box wasn't too hard to change either, glad you like it now!
Really has changed alot too in the last 6 months!!!
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
It looked gash with the wheels silver! I'll have to spray mine too sometime!
'box wasn't too hard to change either, glad you like it now!
Really has changed alot too in the last 6 months!!!
#15
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Cheers guys! I'm not selling the coilys for a good while, but I'll keep you in mind for when I do :P
And yeah, I cant beleive how much I've actually done in 6 months, really quite suprised. Does explain why I've had no money mind.
And yeah, I cant beleive how much I've actually done in 6 months, really quite suprised. Does explain why I've had no money mind.
#20
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thank you very much, appreciate the kind comments like that.
To be honest, it's getting copied by loads of people now, so when I'm done it wont look anything like it does now. Was original for the 6 months or so, be back better than ever next time round!
To be honest, it's getting copied by loads of people now, so when I'm done it wont look anything like it does now. Was original for the 6 months or so, be back better than ever next time round!
#23
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Havent updated this thread in a long while, but time for it I think!
The car now looks like this:
![Name: IMG_0186.jpg
Views: 164
Size: 103.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120725d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0186.jpg)
![Name: DSCF4446.jpg
Views: 191
Size: 119.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120726d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4446.jpg)
For what reason you may ask? Well, the car is undergoing a huge overhaul. I have bought a customer cages weld in cage, and have set about stripping the car ready for it, it's due to go up in the next few weeks, so will be back end of May all being well.
In the meantime, I've bought a few new bits:
![Name: DSCF4417.jpg
Views: 162
Size: 75.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120727d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4417.jpg)
Lightweight battery
![Name: DSCF4400.jpg
Views: 167
Size: 109.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120728d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4400.jpg)
Pedal box
Also removed all the engine:
![Name: DSCF4391.jpg
Views: 185
Size: 130.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120729d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4391.jpg)
And now:
![Name: IMG_0185.jpg
Views: 179
Size: 89.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120730d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0185.jpg)
Manual rack will be going on, AC removed and lots of other parts.
Also bought another box, this time an FRP box with Bara LSD, should transform the drive of the car, got to collect a set of 280mm Hi-Spec 4 pots, and loads of other parts should be with me soon, including something from Performance Trim![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Loads else going on, cant wait to see some progress now
The car now looks like this:
![Name: IMG_0186.jpg
Views: 164
Size: 103.2 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120725d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0186.jpg)
![Name: DSCF4446.jpg
Views: 191
Size: 119.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120726d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4446.jpg)
For what reason you may ask? Well, the car is undergoing a huge overhaul. I have bought a customer cages weld in cage, and have set about stripping the car ready for it, it's due to go up in the next few weeks, so will be back end of May all being well.
In the meantime, I've bought a few new bits:
![Name: DSCF4417.jpg
Views: 162
Size: 75.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120727d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4417.jpg)
Lightweight battery
![Name: DSCF4400.jpg
Views: 167
Size: 109.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120728d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4400.jpg)
Pedal box
Also removed all the engine:
![Name: DSCF4391.jpg
Views: 185
Size: 130.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120729d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-dscf4391.jpg)
And now:
![Name: IMG_0185.jpg
Views: 179
Size: 89.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120730d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-img_0185.jpg)
Manual rack will be going on, AC removed and lots of other parts.
Also bought another box, this time an FRP box with Bara LSD, should transform the drive of the car, got to collect a set of 280mm Hi-Spec 4 pots, and loads of other parts should be with me soon, including something from Performance Trim
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Loads else going on, cant wait to see some progress now
![Content](https://passionford.com/forum/images/smilies/content.gif)
#26
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Cars been having the roll cage in for a while now, should be collecting it over the next fortnight, here's the updates of where it is at:
![Name: 017773da.jpg
Views: 196
Size: 55.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120731d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-017773da.jpg)
![Name: b2e664b3.jpg
Views: 178
Size: 59.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120732d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-b2e664b3.jpg)
New eccentric top mounts:
![Name: 978f34b1.jpg
Views: 161
Size: 57.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120733d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-978f34b1.jpg)
Roof skin removed:
![Name: 8a112c73.jpg
Views: 185
Size: 50.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120734d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-8a112c73.jpg)
Also got my new engine, a 1.6 SE, bigger valve head, Jenvey 42mm DTH ITB's, ShawSpeed SS4 camshafts, baffled sump and Omex 600 management:
![Name: c71931c2.jpg
Views: 155
Size: 62.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120735d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-c71931c2.jpg)
![Name: aa013142.jpg
Views: 146
Size: 60.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120736d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-aa013142.jpg)
Hi Spec 285mm 4 Pots:
![Name: f1850019.jpg
Views: 169
Size: 141.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120737d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-f1850019.jpg)
Hope you like, I do!!!
![Name: 017773da.jpg
Views: 196
Size: 55.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120731d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-017773da.jpg)
![Name: b2e664b3.jpg
Views: 178
Size: 59.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120732d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-b2e664b3.jpg)
New eccentric top mounts:
![Name: 978f34b1.jpg
Views: 161
Size: 57.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120733d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-978f34b1.jpg)
Roof skin removed:
![Name: 8a112c73.jpg
Views: 185
Size: 50.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120734d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-8a112c73.jpg)
Also got my new engine, a 1.6 SE, bigger valve head, Jenvey 42mm DTH ITB's, ShawSpeed SS4 camshafts, baffled sump and Omex 600 management:
![Name: c71931c2.jpg
Views: 155
Size: 62.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120735d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-c71931c2.jpg)
![Name: aa013142.jpg
Views: 146
Size: 60.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120736d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-aa013142.jpg)
Hi Spec 285mm 4 Pots:
![Name: f1850019.jpg
Views: 169
Size: 141.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120737d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-f1850019.jpg)
Hope you like, I do!!!
#28
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Stuck with the 1.6 for numerous reasons, good strong engine, I know what I'm doing with them, cheap parts and this one is running good power!
Just shy of 170bhp in NA form. Along with my Ford Racing Puma gearbox and Bara diff, should certainly be quick!
Just shy of 170bhp in NA form. Along with my Ford Racing Puma gearbox and Bara diff, should certainly be quick!
#32
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
For those that may not be aware, my car has been with Jon and Mike at ShawSpeed for a roll cage fitting from Custom Cages, and I got it back today.
I think pictures speak louder than words, so I'll let them do the talking:
![Name: 432e9bc5.jpg
Views: 165
Size: 62.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120738d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-432e9bc5.jpg)
![Name: 5686aa77.jpg
Views: 174
Size: 95.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120739d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-5686aa77.jpg)
Roof removed for carbon fibre replacement:
![Name: c90ae811.jpg
Views: 147
Size: 102.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120740d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-c90ae811.jpg)
Steering column and dash bar:
![Name: 8939ed77.jpg
Views: 141
Size: 87.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120741d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-8939ed77.jpg)
Additional bracing on door bars:
![Name: 6e596683.jpg
Views: 124
Size: 103.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120742d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-6e596683.jpg)
Welded in seat bars and mounts:
![Name: bd913c32.jpg
Views: 130
Size: 116.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120743d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-bd913c32.jpg)
![Name: 0943a545.jpg
Views: 150
Size: 103.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120744d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-0943a545.jpg)
Close fitting, required modification to internals of car:
![Name: a709ae20.jpg
Views: 119
Size: 69.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120745d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-a709ae20.jpg)
To be continued...
I think pictures speak louder than words, so I'll let them do the talking:
![Name: 432e9bc5.jpg
Views: 165
Size: 62.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120738d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-432e9bc5.jpg)
![Name: 5686aa77.jpg
Views: 174
Size: 95.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120739d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-5686aa77.jpg)
Roof removed for carbon fibre replacement:
![Name: c90ae811.jpg
Views: 147
Size: 102.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120740d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-c90ae811.jpg)
Steering column and dash bar:
![Name: 8939ed77.jpg
Views: 141
Size: 87.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120741d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-8939ed77.jpg)
Additional bracing on door bars:
![Name: 6e596683.jpg
Views: 124
Size: 103.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120742d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-6e596683.jpg)
Welded in seat bars and mounts:
![Name: bd913c32.jpg
Views: 130
Size: 116.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120743d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-bd913c32.jpg)
![Name: 0943a545.jpg
Views: 150
Size: 103.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120744d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-0943a545.jpg)
Close fitting, required modification to internals of car:
![Name: a709ae20.jpg
Views: 119
Size: 69.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120745d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-a709ae20.jpg)
To be continued...
#33
Regular Contributor
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
A-Pillar Gussets:
![Name: e19039db.jpg
Views: 122
Size: 108.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120746d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-e19039db.jpg)
Fully removable front cross member:
![Name: cf2d78ce.jpg
Views: 124
Size: 76.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120747d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-cf2d78ce.jpg)
Plated up heater matrix holes, pollen filter and fuse box:
![Name: c335bc50.jpg
Views: 129
Size: 101.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120748d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-c335bc50.jpg)
A shot from the rear:
![Name: 3382f811.jpg
Views: 116
Size: 91.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120749d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-3382f811.jpg)
And time for my party piece, eccentric top mounts:
![Name: 99adb909.jpg
Views: 113
Size: 85.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120750d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-99adb909.jpg)
Engine bay shot:
![Name: d17a7f58.jpg
Views: 130
Size: 115.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120751d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-d17a7f58.jpg)
Finally, my office......
![Name: 0252efaa.jpg
Views: 121
Size: 102.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120752d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-0252efaa.jpg)
And now away until next time:
![Name: 3a8a0c84.jpg
Views: 125
Size: 108.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120753d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-3a8a0c84.jpg)
Hope you enjoy!
![Name: e19039db.jpg
Views: 122
Size: 108.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120746d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-e19039db.jpg)
Fully removable front cross member:
![Name: cf2d78ce.jpg
Views: 124
Size: 76.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120747d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-cf2d78ce.jpg)
Plated up heater matrix holes, pollen filter and fuse box:
![Name: c335bc50.jpg
Views: 129
Size: 101.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120748d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-c335bc50.jpg)
A shot from the rear:
![Name: 3382f811.jpg
Views: 116
Size: 91.5 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120749d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-3382f811.jpg)
And time for my party piece, eccentric top mounts:
![Name: 99adb909.jpg
Views: 113
Size: 85.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120750d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-99adb909.jpg)
Engine bay shot:
![Name: d17a7f58.jpg
Views: 130
Size: 115.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120751d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-d17a7f58.jpg)
Finally, my office......
![Name: 0252efaa.jpg
Views: 121
Size: 102.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120752d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-0252efaa.jpg)
And now away until next time:
![Name: 3a8a0c84.jpg
Views: 125
Size: 108.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/120753d1501884623-project-tango-fiesta-itb-d-track-car-caged-and-carbon-d-3a8a0c84.jpg)
Hope you enjoy!
#36
Lucifer II - 666
![Default](https://passionford.com/forum/images/icons/icon1.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#40
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Proper build.
Would it be worth while to strip the whole shell and have it dipped and primed before the rebuild, save corrosion in the future years etc.
Would it be worth while to strip the whole shell and have it dipped and primed before the rebuild, save corrosion in the future years etc.