Autoflock Motorsport Demo Car
#82
Half Rice Half Chips
Thread Starter
Well not much progress been made as new premises has been taking up much of my time. But this arrive today:
M_Tech V4 Ecu, Loom, Comms Cable & Software, fully mappable all singing all dancing ecu!!!!!
the ecu looks to be of very good quality as so does the loom. I need an original fiesta rs turbo loom if anyone has one so I can splice the 2 together.
I shall be putting the engine back together in the coming weeks, hopefully be able to turn the key at some point over xmas bar any complications.
Big shout out to Matt @ Mtech for supplying the ecu bits and also the base map, much appreciated mate, get that scooby finished!!!
M_Tech V4 Ecu, Loom, Comms Cable & Software, fully mappable all singing all dancing ecu!!!!!
the ecu looks to be of very good quality as so does the loom. I need an original fiesta rs turbo loom if anyone has one so I can splice the 2 together.
I shall be putting the engine back together in the coming weeks, hopefully be able to turn the key at some point over xmas bar any complications.
Big shout out to Matt @ Mtech for supplying the ecu bits and also the base map, much appreciated mate, get that scooby finished!!!
Last edited by Raj_FRST; 19-11-2009 at 10:24 PM.
#84
BANNED
BANNED
Join Date: Jul 2009
Location: Wiltshire
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
Raj,
Scooby finished? Is a project car EVER finished? depressing! lol
Let me know when you are getting into the running of things, any questions, call the hotline lol
Matt
Scooby finished? Is a project car EVER finished? depressing! lol
Let me know when you are getting into the running of things, any questions, call the hotline lol
Matt
#89
stage4 2wd cosworth
at first when i saw the paint brush out i thought o shit lol but now iv went through the thread there is loads of money and hard graft gettin spend on a gd spec.keep it up buddy looking forward to seein the finished project
#90
BANNED
BANNED
ive ended up doing most of the white again with rattle cans, a good friend is ready when I am to do the whole car in white, but things keep getting put further back. Just got back from a chat with a few friends who run CPR in Warrington about the running in plans, couple this with tempting options from Matt at M-Tech and 400bhp suggestions from Simon (sas) at Sitech and the its back to the drawingboard again.
must be sensible must be sensible
My mind is made up now, staying sensible with the current spec and just gonna get it running asap
But then the plan will probably change in the next few days :-(
6 speed MT285 anyone??
#91
BANNED
BANNED
Well got off the phone to Sitech earlier and they have confirmed that my P4 Newmans Cam is on its way. All thats needed now is a cambelt, remove the crappy breather blank from the block and get the new pulley sorted and its time to put the little power plant back together
Will keep everyone posted
#92
Regular Contributor
Fantastic project here Raj! I remember you telling me about it when I came to collect my dash, looks like you've made some great progress.
Oh, and I want an Autoflock T-Shirt :P
Oh, and I want an Autoflock T-Shirt :P
#93
BANNED
BANNED
got t-shirts, boxers, thongs you name it!!!
Hope all is well Wardy, our new premises is just behind Tweeks in Wrexham if you fancy poping down for a brew some time mate
Hows your gearbox holding up?
Hope all is well Wardy, our new premises is just behind Tweeks in Wrexham if you fancy poping down for a brew some time mate
Hows your gearbox holding up?
#95
BANNED
BANNED
Santa's been early, MANY THANKS SITECH
well my new phase 4 camshaft arrived today as promised. As you will note by the pics the package includes the solid lifters and clamping tool. All looks very good quality. I will maybe do a seperate thread on how to set these up as im sure many people would want to know (especially me.lol)
Thats all for now, taking the engine to work this weekend to begin assembling it
Thats all for now, taking the engine to work this weekend to begin assembling it
#98
BANNED
BANNED
well nothing much has been happening as I have been researching what to do about by cylinder head dilema. But I have now come up with a plan for the head, it is having some secret work done to it by some secret lads at a secret place, the mods mods themselves are, well, a secret.lol
But they will be revealed once the car has been ran on a dyno on full chat.
Whilst the head is away I shall crack on with the interior or more so the custom dash.
More pics to come real soon peeps
But they will be revealed once the car has been ran on a dyno on full chat.
Whilst the head is away I shall crack on with the interior or more so the custom dash.
More pics to come real soon peeps
#100
BANNED
BANNED
not yet mate, picking up the standard loom on Sat, whats the best way to connect the wires? was gonna solder then heat shrink, also might group all the connection in a jointing box with resin??
You fitted that dash yet?
You fitted that dash yet?
#102
BANNED
BANNED
Top Spec ZVH Cylinder Head Prepared by Sitech - Top Job
Well after much much debating about how to modify my cylinder head and long chats with some of the best tuners around, I decided to use Sitech. I have been talking to Simon and recently Bezo from the start of my project which was over a year ago but only recently actually spent any money with them. They are never dismassive to my calls and are ALWAYS very helpful which is the main reason I chose to use them. Trust is a BIG thing within the tuning world and I can say their work is worth every penny which is also more than reasonable. Anyway big thanks guys.
Im not going to let on the exact spec of the head but here are some pics, the work is so much better than what was there before, it was bodged by a diy ebayer selling it as a cylinder head developments one, oh I walked into that one.
Here are some pics
Looks even better in the flesh, well ive ordered a feela guage to set the solids so things should start moving along nicely now, just gotta try and put a bit more time aside from work to get the old girl finish for this summer.
Thanks for looking
Im not going to let on the exact spec of the head but here are some pics, the work is so much better than what was there before, it was bodged by a diy ebayer selling it as a cylinder head developments one, oh I walked into that one.
Here are some pics
Looks even better in the flesh, well ive ordered a feela guage to set the solids so things should start moving along nicely now, just gotta try and put a bit more time aside from work to get the old girl finish for this summer.
Thanks for looking
Last edited by 1223456; 02-03-2010 at 10:38 PM.
#106
BANNED
BANNED
Big thanks to Crazycage & Richie
Well mad some big progress tonight, the lads very kindly offered to pop round tonight and help me out with putting the old engine back together and timing it up.
Few pics for you
Richie cleaning the head after setting the lifters, I had been a bit keen with the oiling :-(
Few pics of the motor still in 2 pieces
Richie sorting the botom pully & disc
Motor together
Even though this was a mock build it was really nice to see it looking like an engine again. There was a few hucups though, the crank pully was still zetec so the teeth were wrong and would not marry up with the timing so I need to get a cvh bottom gear, also I can't find my washers for the head bolts which again new ones will have to be sourced.
I have also begun preping all the under bonnet parts for powder coating so this should help give the car a nice new lease of life. You may have noticed that gary hasnt done much by now, that is because he was too busy hiyjacking my account and writing crap!!!!
But in all fairness I really appreciated their help, my motiviation os back on track with this build thanks to these lads!
More to come real soon, thanks for looking.
p.s. car sprayer needed for this
Few pics for you
Richie cleaning the head after setting the lifters, I had been a bit keen with the oiling :-(
Few pics of the motor still in 2 pieces
Richie sorting the botom pully & disc
Motor together
Even though this was a mock build it was really nice to see it looking like an engine again. There was a few hucups though, the crank pully was still zetec so the teeth were wrong and would not marry up with the timing so I need to get a cvh bottom gear, also I can't find my washers for the head bolts which again new ones will have to be sourced.
I have also begun preping all the under bonnet parts for powder coating so this should help give the car a nice new lease of life. You may have noticed that gary hasnt done much by now, that is because he was too busy hiyjacking my account and writing crap!!!!
But in all fairness I really appreciated their help, my motiviation os back on track with this build thanks to these lads!
More to come real soon, thanks for looking.
p.s. car sprayer needed for this
Last edited by 1223456; 15-05-2010 at 12:34 AM.
#111
BANNED
BANNED
Join Date: Jan 2005
Location: North Wales....Congleton now though!
Posts: 9,757
Likes: 0
Received 1 Like
on
1 Post
Cheers Cochyn,
really itching to get the thing going now, really want to turn the key before xmas but its one bill after another at the mo what with mates weddings, birthdays etc. Always the way. Really going to try and use AG's focus as an influence though with the exhaust setup and im powdercoating the wheels white once I get into my new premises. Was going to leave the car white but I think im going to get it stickered up. Hows your Focus coming along?
Which clubs are nearest me for Ford enthusiasts as there are a few in my village including my brother but we dont know where the meets are
really itching to get the thing going now, really want to turn the key before xmas but its one bill after another at the mo what with mates weddings, birthdays etc. Always the way. Really going to try and use AG's focus as an influence though with the exhaust setup and im powdercoating the wheels white once I get into my new premises. Was going to leave the car white but I think im going to get it stickered up. Hows your Focus coming along?
Which clubs are nearest me for Ford enthusiasts as there are a few in my village including my brother but we dont know where the meets are
Its going well, but I wanna take engine appart and build something silly soon. More to come. But as for the meets, go to the RSOC of North Wales meet in Llandudno Junction on the last Monday of every month @ around 7:30pm
#113
BANNED
BANNED
Well I decided to do a bit of powder coating as I had a bit of free time, I have also done the fuel rail but forgot to get a picture of it
Should be able to get a bit more done this week in the evenings, the rocker cover is next
Cheers
Raj
Should be able to get a bit more done this week in the evenings, the rocker cover is next
Cheers
Raj
#116
BANNED
BANNED
#119
BANNED
BANNED
Well time for a quick update for anyone who is interested, ended up removing some of the powdercaoting from the engine as I got far too caried away and it looked too much imo. So the alternator pulley and cam pulley have been re blasted and laquered.
The engine is now built back up and just needs the inlet and exhaust manifolds installing. Then this sunday all being well it shall be slotted back into the engine bay.
I shall try and get some pics up some time this week to show some of the powdercoating and also we are refirbing the alloy wheels.
will keep you all posted
thanks for looking
The engine is now built back up and just needs the inlet and exhaust manifolds installing. Then this sunday all being well it shall be slotted back into the engine bay.
I shall try and get some pics up some time this week to show some of the powdercoating and also we are refirbing the alloy wheels.
will keep you all posted
thanks for looking