Ag motorsport carbon focus cossie **** bhp time attack sept 2013
07-08-2009, 01:05 PM
*** Sierra RS Custard ***
Join Date: Dec 2006
Posts: 47,250
Quote:
Originally Posted by
andrewg
my buckets are flat and yes i got kenny to make me 12mm deep ones so no chance of them jumping out!!
Ideal, problem solved then
On mine there isnt enough room on the top of the valve before the collet for that, hence the running it upside down and up into the bucket, but obviously your setup is a little different to mine and the rs200 then.
07-08-2009, 01:28 PM
PassionFord Post Troll
Join Date: Jun 2005
Location: ayrshire
Posts: 2,552
Likes: 0
Quote:
Originally Posted by
Chip
Ideal, problem solved then
On mine there isnt enough room on the top of the valve before the collet for that, hence the running it upside down and up into the bucket, but obviously your setup is a little different to mine and the rs200 then.
yes think its just the type of valve used there is about 17mm above the collets
the old engine was opposite way round with the stem on the bucket and the shim went over it
07-08-2009, 01:45 PM
*** Sierra RS Custard ***
Join Date: Dec 2006
Posts: 47,250
Well with 12mm indentation now, you're laughing
Wish I had a kenny to randomly machine stuff like that up
07-08-2009, 02:37 PM
PassionFord Post Whore!!
Join Date: May 2003
Location: Durham
Posts: 3,753
God, have you not finished rebuilding this car yet Andy FFS !!!!
07-08-2009, 04:45 PM
COS i'm WORTH it
Join Date: Sep 2008
Location: lost...............!
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
what did you pick up on your road trip then andy?
07-08-2009, 07:44 PM
PassionFord Post Whore!!
Join Date: Jun 2009
Location: catterick/sunny yorkshire
Posts: 8,308
Quote:
Originally Posted by
andrewg
sore this in the flesh to day when droped me shell off ,the fab work is top notch ,
07-08-2009, 09:52 PM
PassionFord Post Troll
Join Date: Jun 2005
Location: ayrshire
Posts: 2,552
Likes: 0
07-08-2009, 09:55 PM
Ban[B][/B]ned
Join Date: Jul 2005
Location: The Pool.
Posts: 34,090
Likes: 0
Received 0 Likes
on
0 Posts
I take it the front left wing is straight off the Ultimate WRC car?
Benni.
07-08-2009, 09:56 PM
PassionFord Post Troll
Join Date: Jun 2005
Location: ayrshire
Posts: 2,552
Likes: 0
Quote:
Originally Posted by
Benni
I take it the front left wing is straight off the Ultimate WRC car?
Benni.
yes its had the bottom repaired
07-08-2009, 09:57 PM
15K+ Super Poster!!
Thread Starter
Join Date: Mar 2005
Location: Ayrshire (the bronx)
Posts: 17,278
Nice one mate
07-08-2009, 09:58 PM
15K+ Super Poster!!
Thread Starter
Join Date: Mar 2005
Location: Ayrshire (the bronx)
Posts: 17,278
Did you get another bonnet from m sport?
07-08-2009, 09:58 PM
Too many posts.. I need a life!!
Join Date: Sep 2008
Location: kent
Posts: 968
Likes: 0
Received 0 Likes
on
0 Posts
07-08-2009, 09:59 PM
PassionFord Post Whore!!
Join Date: Nov 2004
Location: Middlesbrough
Posts: 7,295
Likes: 0
Received 0 Likes
on
0 Posts
not far off paint again andy
07-08-2009, 10:02 PM
Too many posts.. I need a life!!
Join Date: Sep 2008
Location: kent
Posts: 968
Likes: 0
Received 0 Likes
on
0 Posts
Was the in car camera rolling at the time ???
07-08-2009, 10:02 PM
PassionFord Post Troll
Join Date: May 2004
Location: luton
Posts: 2,952
Likes: 0
Received 0 Likes
on
0 Posts
looking good mate,was a sorry sight to see it at ford fair after the crash,glad you were ok and good to see such an awesome car being sorted so quickly,wish i had the time,money and skills to do something like this
07-08-2009, 10:13 PM
PassionFord Post Troll
Join Date: Jun 2005
Location: ayrshire
Posts: 2,552
Likes: 0
Quote:
Originally Posted by
Matt carter
Was the in car camera rolling at the time ???
no it wasn't in! since the engine was nylon mounted there is too much vibration,, needing a softer mount
07-08-2009, 10:21 PM
I'm Finding My Feet Here Now
Join Date: Sep 2007
Location: chorley - lancashire
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
andrewg
no it wasn't in! since the engine was nylon mounted there is too much vibration,, needing a softer mount
or some sort of spongy soft camera mount to take out the vibrations?
starting to come together now bud, looking good
07-08-2009, 10:27 PM
PassionFord Post Whore!!
Join Date: Oct 2004
Location: south london
Posts: 3,902
Can't belive it's almost done lmao
you can't ever rest, all this and having to do work that earns money to.
:thumbsup:
07-08-2009, 10:52 PM
Too many posts.. I need a life!!
Join Date: Jun 2004
Location: Sydney
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
andrewg
no it wasn't in! since the engine was nylon mounted there is too much vibration,, needing a softer mount
Lots of options here
http://www.b-hague.co.uk/camera_suct...uum_mounts.htm
07-08-2009, 10:55 PM
Advanced PassionFord User
Join Date: Jul 2004
Location: Carlisle, Cumbria
Posts: 1,518
Likes: 0
Received 0 Likes
on
0 Posts
Unreal how quick you manage to get on with things - i take it your not married or if you are she must be tied up under the stairs's cupboard!
08-08-2009, 12:05 AM
PassionFord Post Troll
Join Date: Dec 2005
Location: Near Glasgow
Posts: 2,511
Likes: 0
Received 0 Likes
on
0 Posts
Andy have you got any vids from the in car camera in the past?
08-08-2009, 06:37 AM
Glennvestite
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Top work mate you dont mess about.
08-08-2009, 12:38 PM
BANNED
BANNED
Join Date: Jan 2005
Location: North Wales....Congleton now though!
Posts: 9,757
Likes: 0
Great work so far Andy, fair play to you
08-08-2009, 12:42 PM
Professional Waffler
Join Date: May 2003
Location: Cardiff
Posts: 26,931
Likes: 0
Received 0 Likes
on
0 Posts
regarding the camera
why not do what i have done and use a solid state recorder, it records straight to a memory car, and vibrations dont affect it
i have bullets camera's too
excellent work dude
08-08-2009, 01:43 PM
Part of the Furniture
Join Date: Oct 2008
Location: cannock
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Awesome to see this so far done again already.
08-08-2009, 02:30 PM
15000
Join Date: Feb 2008
Location: Scotland
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
Benni
I take it the front left wing is straight off the Ultimate WRC car?
Benni.
And a Munchis front bumper!
Looking forward to next time its up at the Hill.
08-08-2009, 02:35 PM
PassionFord Post Whore!!
Join Date: May 2004
Posts: 5,618
Likes: 0
Received 0 Likes
on
0 Posts
is that door on just for allignment? youre still going carbon doors?
cant believe how quick its back together
08-08-2009, 03:15 PM
PassionFord Post Whore!!
Join Date: Sep 2005
Location: Skelmersdale, Lancashire
Posts: 4,367
Come on Ronnie, Can you really see Andy running a full steel door on this. Gotta be for allignmen purposes only
08-08-2009, 04:53 PM
PassionFord Post Whore!!
Join Date: Jun 2008
Location: Sunny Devon
Posts: 6,302
fast work andy coming on nicely
08-08-2009, 04:55 PM
PassionFord Post Troll
Join Date: May 2004
Location: Guernsey
Posts: 2,626
Likes: 0
Received 0 Likes
on
0 Posts
Wow, what a fast turn around! all the best with the rebuild, hopefully get to see it in action at National Day
08-08-2009, 07:15 PM
PassionFord Post Troll
Join Date: Jun 2005
Location: ayrshire
Posts: 2,552
Likes: 0
Quote:
Originally Posted by
Spiky
regarding the camera
why not do what i have done and use a solid state recorder, it records straight to a memory car, and vibrations dont affect it
i have bullets camera's too
excellent work dude
it was a digital camera with memory card.
wanting to get the stack system with the video overlay
08-08-2009, 07:17 PM
PassionFord Post Troll
Join Date: Jun 2005
Location: ayrshire
Posts: 2,552
Likes: 0
08-08-2009, 07:19 PM
is half man, half amazin'
Join Date: Feb 2008
Location: newcastle upon tyne
Posts: 2,759
Likes: 0
Received 0 Likes
on
0 Posts
that didnt take long, awesome mate
08-08-2009, 07:20 PM
15K+ Super Poster!!
Join Date: Sep 2004
Location: ESSEX
Posts: 18,043
Fantastic pace and quality of work
08-08-2009, 07:23 PM
PassionFord Post Troll
Join Date: Jun 2005
Location: ayrshire
Posts: 2,552
Likes: 0
trying to get it to GOUDIES paint shop tues!
08-08-2009, 07:27 PM
BlueOval
Join Date: Jul 2007
Location: Edinburgh
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Staying with the blue? Can't wait to see it back out again with the new 800bhp engine kicking butt on the hill!
08-08-2009, 07:27 PM
PassionFord Regular
Join Date: Aug 2006
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
awesome
08-08-2009, 07:27 PM
PassionFord Post Whore!!
Join Date: Nov 2004
Location: Middlesbrough
Posts: 7,295
Likes: 0
Received 0 Likes
on
0 Posts
shame your not closer i owe you a few favours
08-08-2009, 07:29 PM
PassionFord Post Troll
Join Date: Jun 2005
Location: ayrshire
Posts: 2,552
Likes: 0
08-08-2009, 07:36 PM
10K+ Poster!!
Join Date: Jun 2003
Location: Hartlepool
Posts: 10,956
Likes: 0
Received 0 Likes
on
0 Posts