Reyland 3door "tidy up" New pics 3/11/07
#84
20K+ Super Poster.
iTrader: (1)
Join Date: May 2003
Location: Essex... and Birmingham!
Posts: 21,512
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by broadmoor
Originally Posted by Porkie
Originally Posted by smidsy
I think the spoiler looks much better like that Do the bottom one as well though
Well overridden Martooon. Orange again please chaps
Just asked them to paint the Chequer floor black as well. I know it may scratch up after a while, but I think it will look alot better
Car looks great and i would'nt want to question the guys doing the work..but if you would be interested i could get you a couple of these for the floor should you be interested
#87
Lukesville
iTrader: (2)
Originally Posted by Porkie
Looking good as usaul mate, but I am more than happy with mine once black Not actually a massive carbon fan to be honest. hence the black door cards are stuff. Might get the dash stuff replaced too. New switch panels and AFR gauge hold and laptimer all to go in.... after the SPAs have been serviced... only 5 out of the 6 backlights needed replacing and a bargain £30.... EACH +vat + LMHtax no doubt!
Pmsl @ stuff, I think that stuff looks spot on Lee.
Be good to see the car all pristine again, was looking tired at Combe on Rally Day...... had a hard year but what a good year you have had.
A well earnt spruce is just what the Doc ordred.
Are you changing any mechanical specs over the winter.
#88
20K+ Super Poster.
iTrader: (1)
Join Date: May 2003
Location: Essex... and Birmingham!
Posts: 21,512
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by m4dyeti
Originally Posted by Porkie
Looking good as usaul mate, but I am more than happy with mine once black Not actually a massive carbon fan to be honest. hence the black door cards are stuff. Might get the dash stuff replaced too. New switch panels and AFR gauge hold and laptimer all to go in.... after the SPAs have been serviced... only 5 out of the 6 backlights needed replacing and a bargain £30.... EACH +vat + LMHtax no doubt!
Pmsl @ stuff, I think that stuff looks spot on Lee.
Be good to see the car all pristine again, was looking tired at Combe on Rally Day...... had a hard year but what a good year you have had.
A well earnt spruce is just what the Doc ordred.
Are you changing any mechanical specs over the winter.
#92
Baby Cheesus
iTrader: (4)
looking very good everyone, but there is one thing id have done differently
when i had my windows fitted, i found that sitting them on the frame made them look too far it, and said this to the guy that fitted them, so he used some 3 or 4mm thick foam strips dotted about for the window to sit on as well as the bonding stuff.
lokks propper IMO
appologies if the twins have also done this, i cant see in the pics
when i had my windows fitted, i found that sitting them on the frame made them look too far it, and said this to the guy that fitted them, so he used some 3 or 4mm thick foam strips dotted about for the window to sit on as well as the bonding stuff.
lokks propper IMO
appologies if the twins have also done this, i cant see in the pics
#99
Baby Cheesus
iTrader: (4)
Originally Posted by m4dyeti
Originally Posted by martin-reyland
Originally Posted by Dan@FastFord
ps i also think looks hard with no upper rear spoiler, but them im pissed
He is always pissed that Dan, from his sig lloks like he is selling bits of to pay for his habbit....
pair of cunts
i wish was pissed, but im not!
the wife is due to drop in 4 weeks and ive been banned from drinking
still, in about 4 weeks time, i will be constantly pissed...
pissed off with a little baby crying
#103
20K+ Super Poster.
iTrader: (1)
Join Date: May 2003
Location: Essex... and Birmingham!
Posts: 21,512
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dan@FastFord
looking very good everyone, but there is one thing id have done differently
when i had my windows fitted, i found that sitting them on the frame made them look too far it, and said this to the guy that fitted them, so he used some 3 or 4mm thick foam strips dotted about for the window to sit on as well as the bonding stuff.
lokks propper IMO
appologies if the twins have also done this, i cant see in the pics
when i had my windows fitted, i found that sitting them on the frame made them look too far it, and said this to the guy that fitted them, so he used some 3 or 4mm thick foam strips dotted about for the window to sit on as well as the bonding stuff.
lokks propper IMO
appologies if the twins have also done this, i cant see in the pics
#105
1st to 200 without NOS
iTrader: (2)
Originally Posted by Porkie
Originally Posted by Dan@FastFord
looking very good everyone, but there is one thing id have done differently
when i had my windows fitted, i found that sitting them on the frame made them look too far it, and said this to the guy that fitted them, so he used some 3 or 4mm thick foam strips dotted about for the window to sit on as well as the bonding stuff.
lokks propper IMO
appologies if the twins have also done this, i cant see in the pics
when i had my windows fitted, i found that sitting them on the frame made them look too far it, and said this to the guy that fitted them, so he used some 3 or 4mm thick foam strips dotted about for the window to sit on as well as the bonding stuff.
lokks propper IMO
appologies if the twins have also done this, i cant see in the pics
#110
Right small update ,Lee asked us to make up some rear door cards to fill the big holes and also to fit some stowage netting (still to do this ).
Front bumper blown in.
Foot plates back from the powder coaters.
Next i am doing a custom pod to replace the vent to house a laptimer and an afr gauge ,the switches in here will be relocated .
More progress soon .
Front bumper blown in.
Foot plates back from the powder coaters.
Next i am doing a custom pod to replace the vent to house a laptimer and an afr gauge ,the switches in here will be relocated .
More progress soon .
#117
20K+ Super Poster.
iTrader: (1)
Join Date: May 2003
Location: Essex... and Birmingham!
Posts: 21,512
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by m4dyeti
Are you changing any mechanical specs over the winter.