Reyland Focos. Shes got her new clothes on!!04/07/09
#681
PassionFord Regular
Join Date: May 2008
Location: SCOTLAND
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
#682
Heres your spacer pics:
They're spaced at 10mm, next ones at 15mm
There's not a fuckload of toe out on the wheels btw, its the angle i took the pics at. still not a lot of clearance between the wheel and the coilover, with the 15 mm spacer there was about 20/25mm?
I reckon ET20 x 9J would go on, would need to try one first though to check clearances. Might even get 9.5J on there but we need to get the suspension set-up and measure the thing properly cos its ballache doing it on your drive! We need to get it right first time or it'll look gay as fuck with a high offset.
They're spaced at 10mm, next ones at 15mm
There's not a fuckload of toe out on the wheels btw, its the angle i took the pics at. still not a lot of clearance between the wheel and the coilover, with the 15 mm spacer there was about 20/25mm?
I reckon ET20 x 9J would go on, would need to try one first though to check clearances. Might even get 9.5J on there but we need to get the suspension set-up and measure the thing properly cos its ballache doing it on your drive! We need to get it right first time or it'll look gay as fuck with a high offset.
Last edited by Daveysaff; 03-09-2008 at 08:00 PM.
#683
Too many posts.. I need a life!!
iTrader: (3)
Join Date: Sep 2007
Location: wirral / nottingham
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
sound mate 9 j should go on then remember ther aint alot of room but if u say 20-25mm clearence ur only moving the wheel 1/2 inch either way so there is enought room when i spoke to martin earlyer he said they dont do 9.5 mate will hav a look at the weekend and then might speak to martin next week an get some ordered tar for that mate
#690
PassionFord Regular
Join Date: Dec 2007
Location: Brisbane, Australia
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
i just sat here for nearly an hour reading this post and all i can say is WOW!!!! this car is amazing!! ive never seen anything like it! you must be skint lol. by the way where is spraysystems as i only live in prenton and am after gettin an rs kit fitted and a respray??
I cant wait to see this thing driving around its gona be awsome!! nice work lads BEST FOCOS I HAVE EVER SEEN
I cant wait to see this thing driving around its gona be awsome!! nice work lads BEST FOCOS I HAVE EVER SEEN
#692
i just sat here for nearly an hour reading this post and all i can say is WOW!!!! this car is amazing!! ive never seen anything like it! you must be skint lol. by the way where is spraysystems as i only live in prenton and am after gettin an rs kit fitted and a respray??
I cant wait to see this thing driving around its gona be awsome!! nice work lads BEST FOCOS I HAVE EVER SEEN
I cant wait to see this thing driving around its gona be awsome!! nice work lads BEST FOCOS I HAVE EVER SEEN
Andy and the lads are in Liscard, opposite the Primrose pub
#697
PassionFord Regular
Join Date: Dec 2007
Location: Brisbane, Australia
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
#701
Took it for a little spin on thursday
http://uk.youtube.com/watch?v=MM_CxXsCZEk
Then after Diva reassured Ian that he hadn't cooked the engine () He jumped in to 'make sure it was running ok'
http://uk.youtube.com/watch?v=zz76Q6mefBg
Big thanks to The Diva for helping us keep Ian's neighbours awake until gone 11 the night before helping us getting it to run right (as if they weren't fucked off enough after the grinders last year)
And a massive thank you and big up for FordSportJay, who took us down to Brunters at silly o'clock in the morning, hung about all day and helped out with some niggly issues we had on the day
Ta to Dan, Neil and Jamie for the day out too, and the warm cans of orangina and melted milky ways
The cars still not perfect, but it runs and drives and has no traction whatsoever
So its going to the house of pain soon to have a few little bits tinkered with and then get the suspension set up properly so we can make full use of the bits we've got from NutsRuS for the front end, then its TRACK TIME
http://uk.youtube.com/watch?v=MM_CxXsCZEk
Then after Diva reassured Ian that he hadn't cooked the engine () He jumped in to 'make sure it was running ok'
http://uk.youtube.com/watch?v=zz76Q6mefBg
Big thanks to The Diva for helping us keep Ian's neighbours awake until gone 11 the night before helping us getting it to run right (as if they weren't fucked off enough after the grinders last year)
And a massive thank you and big up for FordSportJay, who took us down to Brunters at silly o'clock in the morning, hung about all day and helped out with some niggly issues we had on the day
Ta to Dan, Neil and Jamie for the day out too, and the warm cans of orangina and melted milky ways
The cars still not perfect, but it runs and drives and has no traction whatsoever
So its going to the house of pain soon to have a few little bits tinkered with and then get the suspension set up properly so we can make full use of the bits we've got from NutsRuS for the front end, then its TRACK TIME
Last edited by Daveysaff; 22-09-2008 at 12:11 AM.
#704
I'm Finding My Feet Here Now
Join Date: Sep 2007
Location: chorley - lancashire
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
WOW, Amazing, awesome! just spent 2 hours going through this thread and have to say its about the best build thread i have seen, maybe second to only andy's mk2 focus itself!
would you mnd me asking what you expect the final cost to be around?
would you mnd me asking what you expect the final cost to be around?
#709
Too many posts.. I need a life!!
iTrader: (3)
Join Date: Sep 2007
Location: wirral / nottingham
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
we wanted somthink different every mk1 focus cossie has rs arches so we decided to go with standard there is somthing i want to do with the car how it is now then maybe in the future it will get rs arches
#719
Ban[B][/B]ned
Join Date: Jul 2005
Location: The Pool.
Posts: 34,090
Likes: 0
Received 0 Likes
on
0 Posts
Benni.
#720
PassionFord Post Troll
Join Date: Jul 2005
Location: liverpool
Posts: 2,665
Likes: 0
Received 0 Likes
on
0 Posts
read fast ford today mate, the car looks good in the pics. really good read to as to how it was all built etc..
cant wait to see it inthe flesh