Sierra Track Car
#204
15000
Join Date: Nov 2009
Location: Germany Near Northloop
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
hi, what twins do you mean? i want to have this ones!!
cheers
yogi
#210
PassionFord Post Troll
iTrader: (8)
I was having a sort out last weekend and came across a few pics of the old girl in blighty, then getting in the container and finally registered and on the road in Adelaide, thought you would like to see them.
Only hard copies sorry, the days before digital, regos removed. Hope you like
Only hard copies sorry, the days before digital, regos removed. Hope you like
#214
PassionFord Post Troll
iTrader: (8)
Those pics were from 16 years ago, I was just so glad when I realised yours used to be ours, and that it had not ended up being wrapped around a stobie pole.
I may well take you up on that kind offer one day
Last edited by PAUL S; 27-01-2011 at 03:27 PM.
#216
Only a little update - fitted skeleton flywheel (4.8KG) and double grey diaphram twin ceramettalic plate 7.25in AP clutch (rated 440ft/lb) and finilised the gearbox adaptor. Used a SAAB 900 type hydraulic release bearing. No photo's as I went (damn) just the finished product.
Made a bunch of other little spacers for steering/suspension stuff.
Made a bunch of other little spacers for steering/suspension stuff.
#218
10K+ Poster!!
iTrader: (1)
Join Date: Jul 2006
Location: wolverhampton/ australia
Posts: 10,753
Likes: 0
Received 3 Likes
on
3 Posts
Could you not off rolled the front guards to help with clearance instead of cutting Linc?
I rolled mine and gained about a good 8mm extra clearance.
Your engine is pretty much on par with mine throughout the rev range
I rolled mine and gained about a good 8mm extra clearance.
Your engine is pretty much on par with mine throughout the rev range
#219
Too many posts.. I need a life!!
iTrader: (1)
Join Date: Apr 2006
Location: the Netherlands
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
Only a little update - fitted skeleton flywheel (4.8KG) and double grey diaphram twin ceramettalic plate 7.25in AP clutch (rated 440ft/lb) and finilised the gearbox adaptor. Used a SAAB 900 type hydraulic release bearing. No photo's as I went (damn) just the finished product.
Made a bunch of other little spacers for steering/suspension stuff.
Made a bunch of other little spacers for steering/suspension stuff.
And very interested in the other little spacers for steering/suspension stuff
as well!
#222
Project has slowed down a lot - not died but close to. Bought it's nemesis to play with to keep me happy in the mean time. Working too much and house renovations have got in the way.
Can see me spending some time soon and will update.
Can see me spending some time soon and will update.
Thread
Thread Starter
Forum
Replies
Last Post
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM