James_RScos

Small Update,

Koni's in

Quick rub down and paint yellow bits satin black.





Just waiting on springs and bushes.

got me list done for Ford on Microcat so will print off and drop into my man @ Ford to Order for me.

:+

James_RScos

Little update.....

Paint for the exhaust, going to spray the pipe white and im polishing the cans up rite nice.



Clamps for the exhaust hoping these ones wont bottom out and scrub the floor but he supension should sort that out.



Hoping to finish the floor this weekend up to the red oxside stage, we will see.

James_RScos

Also got a txt from my mate today telling me my List had gone to Ford for Ordering

Munch

nice one, keep it up

James_RScos

Update

Red oxside is nearly done.









Just a little bit to finish on both sides where the beam bolts, couple more couples of red oxside im rollering this on... im going to lightly prime after this then Roller the paint on after this for nice thick coates and each coates getting a weeks drying time.

Nothing else to report.

James_RScos

Update

New News.



got a call from my mate today and my parts list is coming on at ford should be able to gte everything il post pics when stuff starts coming in.

cameron2

Looking good james

Sticky.

iTrader: (4)

BUFTY

Keep up the good work James

maxest

iTrader: (1)

James, dont know if i've said before but i nearly bought this car,, the original owner sent me a pic which really put me off....















I promise you though it is your car

James_RScos

What the Fuck we really need to talk, that fucking mad.

Dan

Just had a good read of the thread James, looks fantastic mate, the car really is spot on and what your doing to it is superb!

Thanks for the PM again too mate, very kind!

Oh, and afpmsl at that last pic!

Ryan

Sticky.

iTrader: (4)

What the fook is on the backseat

Was that taken back in the day of the John/Sue Collins

maxest

iTrader: (1)

Have you not seen whats on the front seat!!

Sticky.

iTrader: (4)

James_RScos

Ford Parts are here, Ł480 later bigcry But worth it.

Spent last night going thourgh working out what i couldnt get from Ford and bagging all the parts with there finis codes and a description of where they go, just makes it a bit easier when it come to asembling, Plus iv got spares for the fuchure.

Porn Follows........................













I will be making a list of parts iv ordered that are still avalible with finis codes and descriptions may help people out.

Cheers.

Dan

Thats alot of parts to fit there James!

Get on msn to we can sort some bits out!

jon@work

iTrader: (5)

James - who do you use for shotblasting and powdercoating ?

James_RScos

Wheel works, Colwick mate they did my latice wheels come out great.

getting them to do the work, theyve done alot of work for my mate and he's a proper picky concours nut.... so thats good enough for me.

CossieGirl

Absolutely stunning

Good luck and keep the pics coming

jon@work

iTrader: (5)

thanks

James_RScos

More Ford parts on order consisting of wheel bearings all round more nuts and bolts.

Fuel tank and strap are in my car just need to compare the old and new tank then it can go for powder coating.

Drive shafts have gone off to be reconed.

all componets are nearly ready to go to the powder coaters just a couple of bit to tidy up this weekend.

Got me brake pipes and connector today Copper nickle ready o make up me new pipes got landrover green paint to spray them in for the ford origanal look.

Going to get my Fuel pipe tomorrow.. found a specailist in Nottingham that does rubber fuel pipe with black cotton braid over the top.

Got me Primer today its got a tint of moonstone blue in it to hide the red oxside then the top coat goes over that.

So lots done will post some pics this weekend.

Cheers All James.

Dan

Nice work mate, who did the primer with a tint of Moonstone for you?

James_RScos

Paintshop supplies Nottingham mate,

Its high build primer too.

Dan

Nice, i've used high build stuff on all my parts i've done for the Saph, much easier to use than tons and tons of coats of the stuff!

fezzajsy

iTrader: (9)

James_RScos

Update Time Boys and Girls..........................

Well some pics of bits iv got anyway.



Bit of Spray paint, satin black for the shocks(see shocks painting progress below) and landrover green for my brake lines when iv made them, got a problem with the brake lines i bough a sealy brake pipe making kit took it round my mates(a mechanic) so he could show me the art of making them and its not working right keeps bending the pipe over to one side and makes a funny shape of the end, so thats going back for a replacement.



Copper nickle brake pipe and male female ends all ready and waiting for making up.



Fuel Pipe for linking the tank up at the rear.



Another box from Uncle Henry!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!

I wonder whats in this one............................................... ............
































Well here you go...............................



More nuts and bolts and washers that id forgotten off the last run.



Wheel Bearings all round.



And this is how the koni's are looking after a rub down and some satin black.

Cheers all James.

maxest

iTrader: (1)

Nice touch with the shocks, makes it look factory

BRAM

iTrader: (1)

hiya mate just read the whole thread keep up the good work and keep the pics coming

rudeboy

iTrader: (2)

Fantastic ... I love your ideas about changing what you need but keeping it factory looking as best as you can (I'm trying to achieve the same too )

Keep up the good work and the updates ... I'm going to enjoy watching this all come together

R5COS

top work there m8 its comming along nicely

dangerous

Hi james its Brian mate, This car was mint when you first got it, I know you used to clean your fiesta alot but this is a whole new level mate. Its looking stunning you will have to let me have a proper look when its done. P.S how you doing anyway long time no see?

Sticky.

iTrader: (4)

Good work James

CosKev3

Great job.

Must be time for an update?????????

Twins

iTrader: (18)

Great work

S1Luke

very nice indeed.

just goes to show a car can always be cleaner.

well done.

keep the up dates coming.

fezzajsy

iTrader: (9)

costina

iTrader: (1)

Looking good james.Will you make it to combe this year?

Paul

James_RScos

Cheers for all the comments, Hi Brain welcome to Pf hope you like it.. your more than welcome down the barn for a look any time mate or when its done kettle will be on.

costina, hi mate see you still have my pic in your sig lol, yes i will be at combe this year car will be ready in time for Centre day mate.. i hope.

Ok, here you go peeps for all you in need of a fix.

Underside now in primer and ready for top coat.



Rear Disc's painted in heat proof silver ready for build up.



Rear hub setup prepped for buildup



Konis finished in satin black



Bit of attention to detail, washers for rear hub nut painted black



Most the powder coating back nicely wrapped great service.



Taster of the powder coating, great attention to details by the powder coating company they had masked all the inner parts of the hub carrier so not to get powder coat where the shims go for the bears, also any threaded holes they had put a peice of masking tape in so the threads stayed clean of powder coat.



Diff has been to the blasters, but i had a recermendation(sp) for this as its case it can be pitted very easy if blasted to heavy and with shot, so i had it bead blasted.

This has been laquaered today and looks amazing, first i blow it of with the air line wiped it down then blastered it with air again.... then on with the laquaer(will post pics soon).

Pre Laquaer




Lots more nut of bolts and washers, i have everything i need now for rebuild.



This is an exsperiment and may change, painted the exhaust white for that clean look.... BUT may go all polished.



Rear Konis paint satin black



New brake pipes iv made up for the rear and painted green... sadly the paint was flaking so they have been keyed really deep and repainted.



Getting there been doing a load more today so will update when i next take some pics.

CheeRS James.

costina

iTrader: (1)

Nice you can come and do mine next

Paul