RWD SCOOBY
Trending Topics
#9
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by foci-ben
I drive a real car and an RC And the RC car is way more fun
Ask your son how fast his car goes
?
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
It proper peels out when lanched
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#13
I've found that life I needed.. It's HERE!!
Join Date: May 2004
Location: West Mids
Posts: 1,010
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i race rc cars at 2 different clubs one being one of the best in the country (stafford) im doing some carpet masters rounds, btcc rounds, torc meeting club meetings, 2006 drift series and some other big rc events this year (oh and im sponsored
)
my cars:
schumacher mi2 spec:
Carbon fibre 2.5mm teemu 3300 chassis
Carbon fibre teemu geometry shock towers
Carbon fibre teemu riser plates
Carbon fibre top deck
Carbon fibre wishbones
Carbon fibre battery brace
Purple alloy diff housings (all)
Purple alloy motor mouunt + layshaft mount
Purple alloy pivot blocks (all round)
Purple alloy battery posts
Purple alloy rear hubs (expensive)
Purple alloy hex's all round
Purple alloy anti roll bar linkages (both front + rear)
Purple alloy spur adaptor
Purple alloy countersunk washers
Purple alloy c hubs
Fully ballraced (hubs, tensioners teflon sealed, diffs, steering, layshaft metal sealed oh and motor ballraced by myself)
Titanium Purple alloy inner hingepins
Titanium Purple alloy outer pins
Titanium Purple alloy turnbuckles
Titanium pinion (5 friggin quid) x2
Titanium screw kit
Metal front drive shafts (awaiting titanium ones allround)
The all important tamiya trf shocks
Front spool
Power grip front belt
84tooth spur
10g chassis weight
Smc matched gp3300's
Futaba s3050 high torque/metal geared
Lrp f1 super reverse esc
Reedy Mvp 'Dyno Tuned' Stock (25000rpm)
Sanwa gemini 2 radio gear (Ł108!!!)
Novak low resistance flex wire
NOS power cap (top stop voltage drop)
Corally low resistance connectors
Professionally airbrushed vectra shell
either cs-22 rubbers or 28mm jaco purple foams
Oh and lots or spares including brand new stuff
![](https://img.photobucket.com/albums/v56/rs500/100_5176.jpg)
![](https://img.photobucket.com/albums/v56/rs500/100_5177.jpg)
![](https://img.photobucket.com/albums/v56/rs500/100_5180.jpg)
![](https://i32.photobucket.com/albums/d9/priestymi2/100_5257.jpg)
![](https://i32.photobucket.com/albums/d9/priestymi2/100_5262.jpg)
Yokomo drift car (built by me)
standard apart from it uses my expensive equipment out of my mi2, sanwa gemini 2 radio gear, reedy mvp dyno tuned stock motor, lrp f1 super reverse esc, futaba s3050 metal geared servo, gp3300 matched cells
![](https://img.photobucket.com/albums/v56/rs500/100_5027.jpg)
![](https://img.photobucket.com/albums/v56/rs500/100_5031.jpg)
Schumacher Axis (now sold on)
Spec:Alloy motor mount and lay shaft mount
Alloy front lower tranny housing
Alloy front upper tranny housing
Alloy front upper suspension mount
Alloy threaded shocks (front and rear)
Alloy shell post blocks (front and rear)
Alloy hubs (all 4)
Alloy battery posts (all 4)
Alloy pivot blocks (all 4)
Alloy rear lower tranny housing
Alloy rear upper tranny housing
Alloy rear upper suspension mount
Alloy spur adaptor
Titanium toe-in adjustable
Titanium screws in top deck + shocks
Carbon fibre battery strap
Carbon fibre top deck
S1 shock towers
S1 chassis
Ball raced steering + whole car (standard)
Kimbrough 87 tooth spur
26 tooth pinion
T.D.S + A.B.S (Torque Distribution System + Adjustable braking system)
Lrp f1 super reverse
Reedy mvp dyno tuned stock motor (25000rpm)
Sanwa Gemini 2 radio gear (Ł110 feckin quid)
Futaba s3050 servo (metal geared)
Gp3300 matched cells
28mm jaco purple foams (extremly grippy and last about 8 months)
![](https://img.photobucket.com/albums/v56/rs500/100_4970.jpg)
![](https://img.photobucket.com/albums/v56/rs500/100_4971.jpg)
team associated tc3
spec:alloy shocks, titanium drive shaft conversion, alloy blue turn buckles, carbon graphite shaft
graphite chassis
graphite shock towers
graphite hubs
graphite c hubs
graphite chassis braces
graphite wishbones
graphite battery bar
![](https://img.photobucket.com/albums/v56/rs500/1af3f636.jpg)
Cen ct4s
completly standard altogether, claimed top speed of 73.4mph but actually does 71mph
Schumacher Xtr3e
standard spart from alloy front wishbones claims 70+ but will actually do 68mph
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
my cars:
schumacher mi2 spec:
Carbon fibre 2.5mm teemu 3300 chassis
Carbon fibre teemu geometry shock towers
Carbon fibre teemu riser plates
Carbon fibre top deck
Carbon fibre wishbones
Carbon fibre battery brace
Purple alloy diff housings (all)
Purple alloy motor mouunt + layshaft mount
Purple alloy pivot blocks (all round)
Purple alloy battery posts
Purple alloy rear hubs (expensive)
Purple alloy hex's all round
Purple alloy anti roll bar linkages (both front + rear)
Purple alloy spur adaptor
Purple alloy countersunk washers
Purple alloy c hubs
Fully ballraced (hubs, tensioners teflon sealed, diffs, steering, layshaft metal sealed oh and motor ballraced by myself)
Titanium Purple alloy inner hingepins
Titanium Purple alloy outer pins
Titanium Purple alloy turnbuckles
Titanium pinion (5 friggin quid) x2
Titanium screw kit
Metal front drive shafts (awaiting titanium ones allround)
The all important tamiya trf shocks
Front spool
Power grip front belt
84tooth spur
10g chassis weight
Smc matched gp3300's
Futaba s3050 high torque/metal geared
Lrp f1 super reverse esc
Reedy Mvp 'Dyno Tuned' Stock (25000rpm)
Sanwa gemini 2 radio gear (Ł108!!!)
Novak low resistance flex wire
NOS power cap (top stop voltage drop)
Corally low resistance connectors
Professionally airbrushed vectra shell
either cs-22 rubbers or 28mm jaco purple foams
Oh and lots or spares including brand new stuff
![](https://img.photobucket.com/albums/v56/rs500/100_5176.jpg)
![](https://img.photobucket.com/albums/v56/rs500/100_5177.jpg)
![](https://img.photobucket.com/albums/v56/rs500/100_5180.jpg)
![](https://i32.photobucket.com/albums/d9/priestymi2/100_5257.jpg)
![](https://i32.photobucket.com/albums/d9/priestymi2/100_5262.jpg)
Yokomo drift car (built by me)
standard apart from it uses my expensive equipment out of my mi2, sanwa gemini 2 radio gear, reedy mvp dyno tuned stock motor, lrp f1 super reverse esc, futaba s3050 metal geared servo, gp3300 matched cells
![](https://img.photobucket.com/albums/v56/rs500/100_5027.jpg)
![](https://img.photobucket.com/albums/v56/rs500/100_5031.jpg)
Schumacher Axis (now sold on)
Spec:Alloy motor mount and lay shaft mount
Alloy front lower tranny housing
Alloy front upper tranny housing
Alloy front upper suspension mount
Alloy threaded shocks (front and rear)
Alloy shell post blocks (front and rear)
Alloy hubs (all 4)
Alloy battery posts (all 4)
Alloy pivot blocks (all 4)
Alloy rear lower tranny housing
Alloy rear upper tranny housing
Alloy rear upper suspension mount
Alloy spur adaptor
Titanium toe-in adjustable
Titanium screws in top deck + shocks
Carbon fibre battery strap
Carbon fibre top deck
S1 shock towers
S1 chassis
Ball raced steering + whole car (standard)
Kimbrough 87 tooth spur
26 tooth pinion
T.D.S + A.B.S (Torque Distribution System + Adjustable braking system)
Lrp f1 super reverse
Reedy mvp dyno tuned stock motor (25000rpm)
Sanwa Gemini 2 radio gear (Ł110 feckin quid)
Futaba s3050 servo (metal geared)
Gp3300 matched cells
28mm jaco purple foams (extremly grippy and last about 8 months)
![](https://img.photobucket.com/albums/v56/rs500/100_4970.jpg)
![](https://img.photobucket.com/albums/v56/rs500/100_4971.jpg)
team associated tc3
spec:alloy shocks, titanium drive shaft conversion, alloy blue turn buckles, carbon graphite shaft
graphite chassis
graphite shock towers
graphite hubs
graphite c hubs
graphite chassis braces
graphite wishbones
graphite battery bar
![](https://img.photobucket.com/albums/v56/rs500/1af3f636.jpg)
Cen ct4s
completly standard altogether, claimed top speed of 73.4mph but actually does 71mph
Schumacher Xtr3e
standard spart from alloy front wishbones claims 70+ but will actually do 68mph
#14
I've found that life I needed.. It's HERE!!
Join Date: May 2004
Location: West Mids
Posts: 1,010
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
and 2 videos of me. (cant right click save videos)
1st racing (read description for details)
http://www.rcpics.net/img/70954
and
my very first drifting video 2 yeard ago (read description for details)
http://www.rcpics.net/img/70955
1st racing (read description for details)
http://www.rcpics.net/img/70954
and
my very first drifting video 2 yeard ago (read description for details)
http://www.rcpics.net/img/70955
#17
Too many posts.. I need a life!!
Join Date: May 2003
Location: durham
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Filthy Rich
Jesus,I never knew you could build RC cars to such a high standard
bet there nearly as expensive as a Cossie![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/shocked.gif)
bet there nearly as expensive as a Cossie
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Pthbbbb](https://passionford.com/forum/images/smilies/smile045.gif)
![Pthbbbb](https://passionford.com/forum/images/smilies/smile045.gif)
#18
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I got a Mk 1 Scooby RC Car, looking abit battered at the moment tho! After I had a run in with my mate's Alfa, but his wont even run properly now!
Think mine is 4WD too
Tell your son his is lookin cool!
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Think mine is 4WD too
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
Thread
Thread Starter
Forum
Replies
Last Post
Focosmitch
Ford Focus RS Parts for Sale.
1
02-06-2016 06:46 PM
turbotrev
Ford Sierra/Sapphire/RS500 Cosworth
39
17-04-2016 09:03 PM