A mate asked me to detail his Subaru Impeza Turbo..... Good turnaround i think!!!!!!!
10-03-2014, 03:52 PM
#1
Chasing Radders
Thread Starter
A mate asked me to detail his Subaru Impeza Turbo..... Good turnaround i think!!!!!!!
Got asked by a mate if i could do anything with a scratch he got along the whole of the passenger side of his Subaru....had a look and said i could sort it but would be better off having the whole car done as where i remove it will stick out like a sore thumb.
So i took delivery of it and proceeded to get a great turnaround........ The cars paintwork was VERY bad so i gave it a good Single Stage correction
Usual washing methods to cleanse the car ready for the machine polishing stage
Used Sonax Perfect Finish which i rate alot and finnally seal in with Collinite 845
Some great 50/50 shots.......
It was a dull day when i took delivery and a sunny day when finished which was very pleasing when he picked it up.....
Enjoy
So i took delivery of it and proceeded to get a great turnaround........ The cars paintwork was VERY bad so i gave it a good Single Stage correction
Usual washing methods to cleanse the car ready for the machine polishing stage
Used Sonax Perfect Finish which i rate alot and finnally seal in with Collinite 845
Some great 50/50 shots.......
It was a dull day when i took delivery and a sunny day when finished which was very pleasing when he picked it up.....
Enjoy
10-03-2014, 04:32 PM
#7
Advanced PassionFord User
Looking really good, 
Trending Topics
10-03-2014, 04:32 PM
#8
Chasing Radders
Thread Starter
Pete....no problem mate, give me a shout....any excuse for some pictures....lol
I use G101 APC diluted to 5:1 to start, then i use Pro Valet Dragons Breath which pulls the iron out of the wheels.....see the shot of the rim with the red staining, thats when its doing its thing....
I use G101 APC diluted to 5:1 to start, then i use Pro Valet Dragons Breath which pulls the iron out of the wheels.....see the shot of the rim with the red staining, thats when its doing its thing....
10-03-2014, 04:36 PM
#9
20K+ Super Poster.
iTrader: (1)
Pete....no problem mate, give me a shout....any excuse for some pictures....lol
I use G101 APC diluted to 5:1 to start, then i use Pro Valet Dragons Breath which pulls the iron out of the wheels.....see the shot of the rim with the red staining, thats when its doing its thing....
I use G101 APC diluted to 5:1 to start, then i use Pro Valet Dragons Breath which pulls the iron out of the wheels.....see the shot of the rim with the red staining, thats when its doing its thing....
Just can't believe how it lifts the brake dust etc mate, the whole car just looks like it's had a respray.
Great job mate and I'll defo get mine over for you pal
10-03-2014, 04:51 PM
#11
Chasing Radders
Thread Starter
10-03-2014, 06:06 PM
#18
Advanced PassionFord User
Great work there. How much do you charge the wife's 1 series needs that kind of work.
10-03-2014, 06:22 PM
#20
10K+ Poster!!
Great turn around! Always liked dark blue imprezas.
looks brand new now 
11-03-2014, 07:25 PM
#30
Chasing Radders
Thread Starter
I've only ever used G101 Ginge, swear by it for so many things when diluted right. As for the moss ect, again G101 and agitated with a brush, then the Karcher at full pelt.....
11-03-2014, 09:16 PM
#31
Advanced PassionFord User
Cracking job mate well done.
12-03-2014, 05:47 PM
#33
Too many posts.. I need a life!!
Join Date: Jun 2005
Location: redditch
Posts: 966
Likes: 0
Received 0 Likes
on
0 Posts
Looks like a different car top job mate how did U find the paint ??? I gave my impreza a detail the weekend used a hex logic light cutting pad with some poorboys ssr and the paint was so sticky it drove me crazy nearly ended up throwing the machine at the car lol
Last edited by craigybaby; 12-03-2014 at 05:48 PM.
13-03-2014, 08:00 AM
#36
Chasing Radders
Thread Starter
I found it ok to work with TBH, the only time is started to be a pain was when the panels were getting hotter from the sun, just got them in the shade and away we went.....
