My Saph Updated 30.12.05 **pics added** Pg3/4
#52
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
And i only cleaned these up before taking it for a spin after we had towed it to get it to start came back a it cut out due to the plugs i think
#55
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
Ok be a little while sence i have updated this post
Well whot has change is :
NOT ALOT
But im on the way with it now 4x4 rear brekes , rear beam all painted and ready to go in to place and some VERY NICE Braided hoses to replace the old rubber ones on the rear and i have done away with the old copper one that ran along the rear arm
Heres some pics of all the bits
And i gave the side skirts a quick paint
Will be changing the beam and brakes ect tomorrow hopefully and finished the under sealing and YES i have found some rust BUT in only 2 places and 1 of which i new about when i brought the car Overall its sound
Well whot has change is :
NOT ALOT
But im on the way with it now 4x4 rear brekes , rear beam all painted and ready to go in to place and some VERY NICE Braided hoses to replace the old rubber ones on the rear and i have done away with the old copper one that ran along the rear arm
Heres some pics of all the bits
And i gave the side skirts a quick paint
Will be changing the beam and brakes ect tomorrow hopefully and finished the under sealing and YES i have found some rust BUT in only 2 places and 1 of which i new about when i brought the car Overall its sound
#58
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
Its getting there SLOWLY
Rear Bream is now in and brakes are all fitted Need to do some bits still tho 2 Bits of welding and some other bits and boobs
Also getting some new wheels as i have put the super t's on the pug
And heres a pic of the new wheels Getting them off here Thanks to Jasesapphy Picking them up on sunday all going well
Whot do you all think they should look good
Rear Bream is now in and brakes are all fitted Need to do some bits still tho 2 Bits of welding and some other bits and boobs
Also getting some new wheels as i have put the super t's on the pug
And heres a pic of the new wheels Getting them off here Thanks to Jasesapphy Picking them up on sunday all going well
Whot do you all think they should look good
#59
Too many posts.. I need a life!!
Join Date: Jun 2005
Location: mansfieldshire hung like a baby=7lb,4oz
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
i think magenta is one of the few coluors that you can get away with havin gold wheels on it'll look top m8 post more pics when shes done
#60
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
Should look good but i have noticed since i have canged the Beam over that the left side rear wheels is sitting @ an angle When i drove it back it handled like shit i put it down to being full of all the old parts ect But i dont think it was
So i have got to have a Closer look @ it this weekend Thats the last time i get some thing like that off ebay So called MINT My arse I now know why he said he would Deliver it And i paid him Ł40 for his fuel
So i have got to have a Closer look @ it this weekend Thats the last time i get some thing like that off ebay So called MINT My arse I now know why he said he would Deliver it And i paid him Ł40 for his fuel
#62
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
Here they are Big big Thanks to Jason good to meet you and hope to see you about @ some of the meets ect
So there we are new wheels on
But its still not Running But will sort that out soon and i've got to sort the rear left arm out as its BLOODY BENT
Only one thing with the wheels Jason was
I had to POLISH the car as it was F!!KING filty
So there we are new wheels on
But its still not Running But will sort that out soon and i've got to sort the rear left arm out as its BLOODY BENT
Only one thing with the wheels Jason was
I had to POLISH the car as it was F!!KING filty
#64
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jasesapphy
Get them two tyres changed before you drive it, they are really bad and need doing, when i realised they had gone i never drove it at all
I will when i get that rear arm changed and get it running right again
#69
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
Gaz yes m8 would look well nice
Radders Dont like it in the middle of the bumper tbh it dont sit right and looks f!!king HUGE
Small one you mine this one
But i've been pulled all ready with that so im not so as its just sat not in use out the house like so i dont want the old bill snopping around it
safflad, Yes m8 i sore them and had to have them
Jason Yer m8 im not likely to get her back up and running untill untill end of july @ the earlyest (when the tax runs out MOT is out already why im not driving it ect) So i'll get my m8 to get a set of tyres in stock for when it goes back over to his for more work
Radders Dont like it in the middle of the bumper tbh it dont sit right and looks f!!king HUGE
Small one you mine this one
But i've been pulled all ready with that so im not so as its just sat not in use out the house like so i dont want the old bill snopping around it
safflad, Yes m8 i sore them and had to have them
Jason Yer m8 im not likely to get her back up and running untill untill end of july @ the earlyest (when the tax runs out MOT is out already why im not driving it ect) So i'll get my m8 to get a set of tyres in stock for when it goes back over to his for more work
#72
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jasesapphy
No probs mate just looking after you
#73
Originally Posted by Freddy_mercury_magic
it looks better in the middle than looking like its slipped down
unfortunately we are not allowed to mod plates at all here.
m8 What you paint the beams with? not worried about it chipping?
TF
#74
Team HOTHOT!
iTrader: (1)
looks good mate get that rear beam sorted ! think a big cone filter for the engine will sound nice, and then some TAX & MOT then ........... come pick me up and take me for a drive , wats up with the engine is it just overfuling still ? did you get a new map scenser wasnt that why you didnt get it mapped ?
#75
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
TurboFlush, Its only done in hammerite as im not to fusted about it ,
it just made it look abit better ect
Luke yep map sence done and its tax till the end of the month just not mot'd asfar as the engine its down on compression
But it will be up and running again @ some point
it just made it look abit better ect
Luke yep map sence done and its tax till the end of the month just not mot'd asfar as the engine its down on compression
But it will be up and running again @ some point
#77
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
Ok not done any thing yet but its now parked up due to the tax running out
But when its back on the road it should be running around 330bhp ish
Some pics of her parked up
And a couple of new part still to be fitted
But when its back on the road it should be running around 330bhp ish
Some pics of her parked up
And a couple of new part still to be fitted
#78
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
Ok thing not move on since last post but its moved again to my m8s and will be started soon
Got a T3 4x4 turbo runing 4b manifold
Also got my new exshurst Big thanks To Mike
Pics up later of new parts
Got a T3 4x4 turbo runing 4b manifold
Also got my new exshurst Big thanks To Mike
Pics up later of new parts
#80
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
Ok heres some pics of the new parts ready for the cossie
I'll get pics of the turbo tomorrow its only a t3 but it's a 4x4 and i'll be running a 4x4 manifold so alot less lag All going well i'll be running it with a set of greens/3bar and stg3 chip looking for around 330bhp ish
I'll get pics of the turbo tomorrow its only a t3 but it's a 4x4 and i'll be running a 4x4 manifold so alot less lag All going well i'll be running it with a set of greens/3bar and stg3 chip looking for around 330bhp ish