Updated pics of My S2 RS Turbo, with new Interior!
#1
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Jun 2003
Location: Midlands
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
Updated pics of My S2 RS Turbo, with new Interior!
Finally got the interior all in the car, and bolted down! Well chuffed!
Just gota keep it nice and clean now!
What do you all think! Ive been offered a considerable ammount of cash for it, but just cant bring myself to sell it!
Its always an on going project but its near its end now as for modding it goes...
Ive got some ST170 brakes ready to fit on, and ive got a few more shiny bits to get sorted and Im getting the passenger side re-sprayed again and then the roof, then thats it, job done...
Im gona get on the show scene this year, not to win awards as I dont think it would win, but just to have it on a stand!
what do you all think! pic dont really do it justice!
Just gota keep it nice and clean now!
What do you all think! Ive been offered a considerable ammount of cash for it, but just cant bring myself to sell it!
Its always an on going project but its near its end now as for modding it goes...
Ive got some ST170 brakes ready to fit on, and ive got a few more shiny bits to get sorted and Im getting the passenger side re-sprayed again and then the roof, then thats it, job done...
Im gona get on the show scene this year, not to win awards as I dont think it would win, but just to have it on a stand!
what do you all think! pic dont really do it justice!
#7
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Jun 2003
Location: Midlands
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by pau1rs
very nice mate.. nice steering wheel... you out bid me on it!!!!!
Cheers for all your comments guys!!!
Trending Topics
#10
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Jun 2003
Location: Midlands
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by andy_turbo1987
what kinda setup is ur engine running.noticed the plenum chamber points to the left at the bottom.where does that run to??
The engine started off life as a 1.6 Power Engineering blueprinted jobbie! But its completely changed since then, its now running a bigger turbo 48 exhaust housing, green fifth injector, and Ive let Karl Norris do some head work and the engine tunning. Its kicking out 240bhp estimate on 23psi!
Im going to get it rolling roaded early next year before I take it the shows, and run it at the pod.
#27
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Jun 2003
Location: Midlands
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RS-adam
real gooood looking car mate... but what did you paint your exhaust manifold wit??
#32
PassionFord Post Troll
iTrader: (2)
Join Date: May 2004
Location: luton
Posts: 2,952
Likes: 0
Received 0 Likes
on
0 Posts
that looks lovely and the blue piping looks spot on
anybody got any ideas where i can get a steering wheel boss for
1 of those steering wheels,ive got the steering wheel and want to
put it on my s2 erst but dont know where to get the boss from
anybody got any ideas where i can get a steering wheel boss for
1 of those steering wheels,ive got the steering wheel and want to
put it on my s2 erst but dont know where to get the boss from
#33
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Jun 2003
Location: Midlands
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
Best place is a ford spares day, or ebay, Im not sure if the aftermarket momo boss's will work... Ford still sell them, but they aint cheap!
#36
Too many posts.. I need a life!!
Nice one Mark, looking very very nice indeed!!
I would stick it on a few stands this year, and sort a mag feature if you haven't done so!!
Very well done mate
I would stick it on a few stands this year, and sort a mag feature if you haven't done so!!
Very well done mate
#37
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Jun 2003
Location: Midlands
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AD-RS1600i
Nice one Mark, looking very very nice indeed!!
I would stick it on a few stands this year, and sort a mag feature if you haven't done so!!
Very well done mate
I would stick it on a few stands this year, and sort a mag feature if you haven't done so!!
Very well done mate
Hows life then, aint spoke to you in ages, we'l have to meet up when the weather gets better! Drop us an email!
cheers
Mark