Andyrs1800

I know ya all aint exactly into fiesta's... But here it is anyway...









Woke up the other week to find all that snow so took a pic, also boot build not fully fin thats why you can see wires and the amps are not polished up, engine needs a clean to.

Engine. 1.8i 16v Zetec Fiesta RS1800 engine, K&n, Full De-cat Ashley system inc 4-2-1 Manifold.
Sus. Spax Springs N Shocks, -60mm, Anti-roll bar.
Wheels/Tyres. 6.5/16in Mondy 5-spokes, 205/45/16 tyres,,
Brakes. RS1800 Drums, Mondy 2.0 16v Front disks n calipers.
Outside. Full RS kit (bumpers, skirts, arches) RS turbo rear spoiler, Golf MK3 VR6 chin spoiler, Focus 'RS' badge, RS turbo Glass (green tint) with pop out rears. De-locked doors and bootlid, rear wiper romoved and filled.
Inside. Full XR2i 16v Trim (winged seats) Elec windows, Snap off Momo wheel, Momo gear knob, White dials.
Ice, Security. Clifford Eagle 2 talking alarm with RCL and proximity sensors, Alpine CD player and 6 disc changer, Magnet mids n tweaters, 2 amps, 12in Cerwin Vega HED sub and 1/2 fin false floor.

Think thats the lot...

Not bad for a 1.1 Classic fiesta... Will get some betta pics...

vroooom ptssssh

looks gd m8, but remove the black strip on the sides!!

Anonymous

thats really nice mate, looks very clean and shiney
mondy rims look great aswell

dave cos4x4

iTrader: (5)

It is very shiny and clean.




Dave.

Anonymous

its a bit red

Andyrs1800

Nice 1 peeps... Yea i spotted that it was red, want to keep the strips will be getting some new ones when i get it painted, they will go all the way across this time,
Plans...

Smoothed and de-badged bonnet,
Re-spray the outside,
Mudflaps,
1-off rear lights (clears tinted red with indicator left clear),
Gauges,
New steerin wheel,
Sidelights in indicators,
Cut down front plate,
Screen & Playstation 2,

Tryin to decide if i want bucket seats and 17's,

Then whateva else i feel like...

Anonymous

looks gd mate

cossiemen

I'm into fiesta's mate and this one looks very clean and nice...

Andyrs1800

Its not runnin at the mo... I would fix it but... No car + Lifts to work = No petrol = Much ŁŁŁ saved...
Its not gettin any fuel, gonna take the injectors out and give em a blast with the air gun, i had a trip to shell and after that it cut out randomly, Dam you optimax...

Cheers for the comments, Cant wait to spend some more ŁŁŁ on it...

Andyrs1800

Was gonna break the car, BUT... managed to find a red rs1800 as a doner car to sort mine out as i need...

2 door's,
Wiring loom,
Fuel pump,
rs1800 bits off engine and ecu,
standard manifold and zorst as ashley ones just fall to bits, (fit cat back stainless)
Bonnet,
random other bits...

Sorted...

cossieman

Anonymous

just what im trying to do but i have to keep the 1.1 engine piece of shit. yours looks class

RstNut

Love it! Mondeo wheels suit it!

MM_RACING

iTrader: (1)

Nice

TIL13R

looks clean! Do like a clean Fiesta

colour code the mirrors IMO aswell

Andyrs1800

Have plans for a blow over re-spray, Gonna smooth the bonnet and colourcode the mirror's, Not gonna paint the base plates,

Cheers for the comments people...

Anonymous

Did the RS1800 come with the origanal alloys as i need a set, oh and an air flow meter.

Andyrs1800

Yes, But my mate wants em for his as he has bought 1 with 2 smashed up wheels... ie... ice + curb... will let ya know if they come up for sale, also i'm havin the full engine and my mate is having the engine thats in my car now so there will be no free air flow sensor sorry,

Anonymous

very nice, whats the spliter from mate?

Cawood

nice mate,

get shut o the black strips tho

Anonymous

Cheers anyway, worth a try.

Anonymous

Nice car

Anonymous

I like the Fiesta mate nice

Andyrs1800

Hello again,

I didnt get the rs1800 doner car as the guy said it was stolen when really he sold it to a mate,

But, i bought a 2i 16v for Ł680, it had failed its mot on rot, but that dont matter as i dont need the shell, it had been rollin road tuned a month before i got it to... here is a link to pics of the doner car...

http://img4.photobucket.com/albums/0...0/Doner%20car/

The engine, zorst and bonnet have been fitted to mine, got the door's, shocks, fuel tank, fuel pump and rear beam to fit to mine then i can put all the trim back in, i also got some mk3.5 adaptor bars for the bucket seats to go in... Also now got a single wiper just for the sake of it really, also added the plastic thingy on the top of the bumper where it meets the bonnet also for the sake of it...

Will be sorted soon...

Andyrs1800

Just some pics taken at for fair...






I'll get some good pic's when its all done...

N1C4T3N

how much arch work ya done with the 16s and droped 60mm lookin the dogs nuts by the way!!!

Andyrs1800

not much archwork done for them wheels, the wheels were on when i got it anyway so not really sure,
Fittin 17's at the mo

wildheart

iTrader: (4)

Looking slightly better than your average 1.1

cossiemen

pics mate, show us some pics please

BM08

looks well nice mate, wheels look ace aswell

if it was my car id keep those wheels

jonty

looking nice andy

Andyrs1800

the car looks a state at the mo with no kit on also car is 10 shades of red/pink...

The 17's fit easier than i thought, maybe i'll take some pics, we will see, the 1 in my sig is just a photoshop.

chiz

wat kinda spliter is that on the front mate???

Andyrs1800

MK3 Golf Deep chin spoiler (fitted to most VR6's and some GTi's) costs about Ł15 a side +vat, works out ast about Ł35, miles cheaper than a laguna splitter.

Andyrs1800

Gonna go home in a bit and cut back my plastic arches and try and take all the windows out ready for paint, having a full blow over on the outside so i want to take the windows out so its not just painted up2 the seals, will be better this way, the mirrors will be coulourcoded at the same time also, may go get some tyres on my wheels later,
Cant wait to get it done, will probs be on the fiestaturbo stand at ford fair this year so you can all see it in the flesh,
Do we know of any1 else fitting 7.5x17in Diamond cut RS7's to a mk3 fez?

Andyrs1800

Here are some pics taken with my cam phone, just taped the wheel arch on to give an idia of what it will look like,
Thats just a random wheel from the scrappies but its the right size, also got the tyre free from a mate, sorted.






Nice new ones under my bed...



Not bad pics for a cam phone,

chiz

gonna look amazin mate!!!!

i was thinkin bout the escort gti 15s(same as mondeo ones but smaller) for mine to avoid arch work and get it slammed??

Andyrs1800

go for it, it will probz need a tiny bit of work and will scrub a tiny bit on full lock, will look sweet if lowered just right.

glenis

where does everyone hang out in bolton ?

Andyrs1800

urm, good point, we just randomly drive about really, there is the weekly meet every thursday on the carparks nr eden,
You from bolton then?