My Mini...Wheel colour change! Pg3
24-04-2007, 05:25 PM
#82
PassionFord Regular
Join Date: Mar 2006
Location: Barnsley
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
can minis be made to handle well??
What about a 1600 zetec SE??? light as feck! get a reliable 135-140 hp easy
Pardon my ignorance BTW
what would a stripped out mini with an A series weigh?
What about a 1600 zetec SE??? light as feck! get a reliable 135-140 hp easy
Pardon my ignorance BTW
what would a stripped out mini with an A series weigh?
24-04-2007, 10:29 PM
#84
There was a the dark time in my past..........
................. a 1985 Mini Mayfair
Ok so in the end it had a 1340cc engine, 45 DCOE Weber, straight cut drop gears, coilovers all round, MG Metro turbo vented front discs, Minifin drums, a full roll cage, buckets and harnesses and a removable steel front end. And how could i forget the 7x13 Superlight wheels 8) 8) 8)
................. a 1985 Mini Mayfair
Ok so in the end it had a 1340cc engine, 45 DCOE Weber, straight cut drop gears, coilovers all round, MG Metro turbo vented front discs, Minifin drums, a full roll cage, buckets and harnesses and a removable steel front end. And how could i forget the 7x13 Superlight wheels 8) 8) 8)
24-04-2007, 10:49 PM
#85
Nice Rich 
My old mini... Weighed 660kg
And i've actually thought of the Zetec S lump..
Inlet on the front.. means good induction 
Originally Posted by scottp
can minis be made to handle well??
What about a 1600 zetec SE??? light as feck! get a reliable 135-140 hp easy
Pardon my ignorance BTW
what would a stripped out mini with an A series weigh?
What about a 1600 zetec SE??? light as feck! get a reliable 135-140 hp easy
Pardon my ignorance BTW
what would a stripped out mini with an A series weigh?
My old mini... Weighed 660kg
And i've actually thought of the Zetec S lump..
Inlet on the front.. means good induction
21-05-2007, 08:34 PM
#96
15000
Join Date: Jan 2006
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Like the black wheels mini's are close to my as rs.
Here is mini in its hayday in mini mag in 99 when i hankerd after owning it and present.
Have spent a lots of money on it as the engine was not the spec i was told it was.
[/img]
These are the last photos before it came of the road its of next week for new panels and then full respray.
Here is mini in its hayday in mini mag in 99 when i hankerd after owning it and present.
Have spent a lots of money on it as the engine was not the spec i was told it was.
[/img]
These are the last photos before it came of the road its of next week for new panels and then full respray.
21-05-2007, 08:51 PM
#97
10K+ Poster!!
Originally Posted by scottp
can minis be made to handle well??
What about a 1600 zetec SE??? light as feck! get a reliable 135-140 hp easy
Pardon my ignorance BTW
what would a stripped out mini with an A series weigh?
What about a 1600 zetec SE??? light as feck! get a reliable 135-140 hp easy
Pardon my ignorance BTW
what would a stripped out mini with an A series weigh?
Almost any vaux or honda lump is a better idea.
Alex
21-05-2007, 10:41 PM
#98
PassionFord Post Whore!!
Originally Posted by AlexF
Originally Posted by scottp
can minis be made to handle well??
What about a 1600 zetec SE??? light as feck! get a reliable 135-140 hp easy
Pardon my ignorance BTW
what would a stripped out mini with an A series weigh?
What about a 1600 zetec SE??? light as feck! get a reliable 135-140 hp easy
Pardon my ignorance BTW
what would a stripped out mini with an A series weigh?
Almost any vaux or honda lump is a better idea.
Alex
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM