Beach

Just wanted to know as my predict the power game at work is kicking off nicely.

Everyone pays a pound and predicts a bhp on a white board...

Closest to the power wins all (to much free time @ work i think lol)

Just this one guy has made a valid point before he predicts his power, ''where is it measured from as i need to know for my prediction''

ATW or Flywheel ??

One bloke has predicted it will not make it to PE's rollers

JohnnyB

It gives a at flywheel figure, but if you look at the dials you can see your at wheels figure

cossie4i+

iTrader: (15)

As above will give both

Steve.

Stavros

can do both, but what everyone quote is flywheel, even tho its pointless

Beach

Thank you all verry muchly

cossie4i+

iTrader: (15)

What spec you running Beach ?

Steve.

Beach

Low comp,.55 t34, pro alloy cooler, 400's, Lightly ported head. Runs a custom NMS map peaks 28 psi holds 26

cossie4i+

iTrader: (15)

Thats a bigger spec and more boost than mine

You should easy do 360bhp

Steve.

Beach

Would be nice and does go verry well indeed, Karl even thought it was a good engine

Ive estimated 340 as anything over i will be even more happy

cossie4i+

iTrader: (15)

We have the same spec except mines on 803s.

I hope to get 350bhp

Steve.

Beach

I'd hope to get 380 but i think 340's a nice conservative figure

cossie4i+

iTrader: (15)

Thats more like it

Hope you get it as well

Steve.

cossie4i+

iTrader: (15)

If you get 20bhp more than mine i will fit my 400s

Will be very interesting for me, my engine spec is 7.8.1 comp, .55 T34, ported head and a Radtec 500 cooler + 803s and 22lb boost.

Its your torque figure im very interested in.

Steve.

Beach

Yeah it should be a cracking day,if im honest im not bothred either way what power it makesits just going to give me a starting point.

Heads coming off before the ring trip so we can wire ring the block and check the valve guides and 3 angle the valves before thry go back in so i know its a bit safer as the head gasket is on its limit really.

As soon as thats done hopefully ill have my new breather system fitted and ill be ready for 28 psi all the way to the limiter once Karlos has worked his magic

Really looking forward to meeting some more new faces and seeing loads of new cars