Mahle pistons
#1
Football Cwazy
Thread Starter
Join Date: Oct 2004
Location: Redditch, Worcestershire
Posts: 9,553
Likes: 0
Received 0 Likes
on
0 Posts
Mahle pistons
i took my block to Karl the other day and he measured the bore at 91.8mm i.e 1mm oversize. i have just removed my pistons from the rods and can't see any markings whatsoever to indicate their size i presume any oversize piston would be marked up as +.25 etc etc
all mine have is a code on the underside ,looks like : 90p44w2+
..oh and a nice bit of valve contact on top..unusual for a cossie eh
any help as to what size these pistons are ( do oversized normally come with markings?? ) oh and i haven't got my vernier with me at the mo
all mine have is a code on the underside ,looks like : 90p44w2+
..oh and a nice bit of valve contact on top..unusual for a cossie eh
any help as to what size these pistons are ( do oversized normally come with markings?? ) oh and i haven't got my vernier with me at the mo
#4
Football Cwazy
Thread Starter
Join Date: Oct 2004
Location: Redditch, Worcestershire
Posts: 9,553
Likes: 0
Received 0 Likes
on
0 Posts
i have no markings on top that i can see, they have mahle cast into the underside and then the code i wrote above. i'm gonna have to measure them i reckon, does anybody know what the piston height should be ?
Thread
Thread Starter
Forum
Replies
Last Post
deathrider666
Technical help Q & A
3
28-09-2015 06:12 PM
timsrs
Ford Sierra/Sapphire/RS500 Cosworth
22
24-09-2015 08:14 PM