Matrix is caput i think . any one got any hints and tips on how to change please

 

dash out job mate

 

What the hole lot or what?

 

could possibly do it with bottom half removed, my dash was already out tho when i took mine out the 3 door.

obviously the 2 hoses from the bulkhead need taking off, then its 2 or 3 nuts that need removing. i cant remember tho.

so pretty usless me posting really

 

I did mine a while back, was dreading the job, but wasnt too bad.
only needed to drop the lower dash. The fiddly bit was getting the matrix past the clutch pedal... Good luck!

 

CheeRS

 

also forgot too ask does the matrix have to be specifically for a cos or are they the same across the sierra range?

 

Afaik they're all the same mate

 

 

try back flushing it first i would ..fucker of a job to do

out let pipe on matrix fit a garden hose let it rip

if you have a ice install or your alarm brains "always a bad idea but it happens"

is in the lower half of the dash then its "LOOK LIKE A BT WIRE BOX " shit city

ive done 2 before I WISH YOU WELL

 

Got round to changing it last night , after trying to flush it through twice to no avail, took me and a mate about two and a half hours , bitch of a job never wanna go through it again but atleast i've got heating now . cheeRS for advice ppl

 

hodgie

u allright mate stuart u ok wen r u movin to leicester cause ill come and see u cause im only round the corner matte that better be the cossie lol

from ur mate aaron

 

Hi stuart how u doing remember me tyrone i hear your liveing in leicester now, what part of leicester though get back to me on this

thanks
tyrone