TommyB

My engine is in,fuel lines are in.Just finishing brakes.
Then the car is going to be wired compleat as 60's wiring was never nice.
As soon as it's wired it's off to the paint shop for a blow over.
I have measured up for a prop and then i'll be getting real close.I went out to vegas in november and brought a Digital 6 plus too.


All the paint is done on the underside and inside.

puddy

That looks great tommy,hope to see you in it up pod this year

puddy

capri-rs

porkie what type of areomotive pump are you running??

the tsunami or the A1000?
and what kind of fuel pressure regulator are you using??

cheers

Danny B

porkie has an A1000 as I supplied it Aeromotive Fuel reg is also a nice peice

capri-rs

how much is an A1000 from u then?also price on a regulator

cheers

costina

iTrader: (1)

All we need now is a mk 4 cortina then i think we got a complete set

What diff are you running Puddy? and what ratio? as mine may need replacing at some stage

puddy

Back axle is a narrow atlas casing on 2 piece quaife shafts and side gears

with an uprated plate type zf slipper,3.44 rear gear.

all built by andy robinson race cars

puddy

capri-rs

how much is an axle like that worth now?? have a almost new wide axle with a new ZF diff(bought 10 years ago) and new half shaft from quaife.

bought it 4 my capri in 95-96 have all the receipts.havent done a mile yet (shit owner,not shit car)

puddy

You should get over £1000 for it ,although there is one for sale on

turbo sport for £1100 ,which has'nt sold, for a while.

puddy

costina

iTrader: (1)

i'm using a big bearing 2.0 cortina atlas with 3.44 to 1 and a capri lsd
i need someone to replace pinion bearings as the nut came loose
think there a bit worn now

any suggestions would b gratefull
cheers

Paul

puddy

You could try this guy,http://www.fostek.co.uk/.

puddy