M K

iTrader: (9)

AS ABOVE,,,,

im using a foam filled jaz fuel cell,,,,,facet lift pump to external swirl pot then to 1 x 044 cossie pump to engine,,,,,

just need to buy the swirl pot from somewhere but i want 1 with threded inlets/outlets ect,,,

what you all using & where did you get the (prices if possible to please)

cheers
marc

M K

iTrader: (9)

Porkie

iTrader: (1)

Proalloy will sort you

We have changed slightly now from this setup but you can still get the idea.

M K

iTrader: (9)

dou you know a rough price for that 1

or did you buy it all at once

Porkie

iTrader: (1)

Have a look on their site mate or give them a bell

gus

iTrader: (1)

do you only need the one pump then?


or did i miss one

M K

iTrader: (9)

im sure 1 044 pump should be enough???

il check with tommy to be sure

puddy

not a very good pic ,moved the swirl pot over a bit now as well.



comes from the jaz cell,-10 to the holley lift pump,-8 into the swirl pot,

out of swirlpot,2x -8 into 2x o44 pumps and grp a filters.

then go's 2x -6 feeds to 500 inlet,1x -6 return to swirl pot ,and a -6

overflow back to tank.

puddy