Garrett GT28RS - actuator with top-connection
02-06-2005, 02:54 PM
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
Garrett GT28RS - actuator with top-connection
A friend of mine has a problem with his S2.
He's installed a GT28RS - however, there is not enough room to safely attach the feed to the actuator due to it coming out of the side.
A -31 Actuator, T3 style, is too big to fit.
He needs an actuator that is top feed, and maximun 5.5cm diameter.
He's seen a picture of a GT28, which looks to have a suitable actuator as standard:
However he doesn't seem able to find a supplier that sells only the actuator.
He's not interested in drilling new brackets or other such modification - he wants a straight out of the box solution.
If anyone knows of any solutions he'd be willing to part with his money immediately to obtain it.
Thanks!
He's installed a GT28RS - however, there is not enough room to safely attach the feed to the actuator due to it coming out of the side.
A -31 Actuator, T3 style, is too big to fit.
He needs an actuator that is top feed, and maximun 5.5cm diameter.
He's seen a picture of a GT28, which looks to have a suitable actuator as standard:
However he doesn't seem able to find a supplier that sells only the actuator.
He's not interested in drilling new brackets or other such modification - he wants a straight out of the box solution.
If anyone knows of any solutions he'd be willing to part with his money immediately to obtain it.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
