Benn 304R

having our rst resprayed and want the rocker cover in the same colour (bayside blue).
Is this poss or will it peel off?, cant imagine any powder coaters having that colour pmsl

I was gonna give it to the bloke who is doing the paint job to do it, but wondered if its worth it?

cheers
BENN

Tony Turbo

You can get it in Powder for around £250 if you want it that bad lol.

Or just spray it in 2 pack (will crack eventually)

Benn 304R

£250

Tony Turbo

Yeah, that's what I was quoted for my wheels, so I just chose another white PMSL

Benn 304R

pmsl, will just get him to paint it then.

Rab

Use plastic primer, as it expands/contracts better. And bake the paint on. I used my oven, at 60 degrees. Been ok so far!

Eagle

iTrader: (2)

i did my old erst rocker cover in halfords cans... cleaned it properly .. then primered it up .. sprayed it over several days allowing the paint to harden in stages.. the just let it sit for a week .. put it on .. was ok for the remaining year i had it
also did the inlet manifold in the same way

R4N SS

iTrader: (6)

im gonna mine in to the bodyshop and get it done in moonstone

EIL132

If you can get a similar colour in plasticote it will never crack or at least mine never. Polished up as god as new to

vroooom ptssssh

im supposed to be getting mine done with a Scotland flag, dunno how its getting done tho? think it's jus normal paint with etch primer and a clear coat on after paint!

R4N SS

iTrader: (6)

vroom better make sure the paint can take the heat first - otherwise it will crack and flake off and look shit.

should be able to cope with 120 deg C.

vroooom ptssssh

the bloke that's doing it said it'll be fine (no idea what he's gonna do but i made sure he knew it'd need to be able to take the heat and he said np )

R4N SS

iTrader: (6)

how much is he charging? as im gonna take mine to the bodyshop and dont wanna get charged to much

cossiemen

so, what are the final suggestions? would like to paint mine too (rocker cover that is)

vroooom ptssssh

£35 im sure he said

R4N SS

iTrader: (6)

35 quid is quite reasonable, altho for about 40 quid you can get it powder coated along with some other bits too, but i dont like the colours they have for powder coating.

vroooom ptssssh

wouldnt be able to get a Scotland flag powder coated on it tho i doubt would need powder coated white, then the blue on top, but leaving out the stripes

R4N SS

iTrader: (6)

cossiemen, i think you can go it in 2pack paint, but best off askin a sprayer as i am not too sure, but that is what i've been told

cossiemen

R4N S S,thanks mate

Eagle

iTrader: (2)

my old one...

Rs Baz

rab did your rocker cover last well after mate

daft bringing this up now but i was just looking around and come
accross something i was going to ask any way