N/A 1.6 CVH
20-09-2016 | 11:39 AM
#1
Thread Starter
Virgin
Joined: Sep 2016
Posts: 5
Likes: 0
From: Essex
N/A 1.6 CVH
Hi this is my first post here so hope I do everything right.
Im currently piecing together an upgrade 1.6 cvh for my orion I've found a brand new block straight from fords in the crate (lucky and excited about that!)
I also have a polished/ported head with fast road cam and solid lifters and a set of twin DHLA 40s. If all goes well I'm hoping it turns out really well. My question is" would I be better running a different/upgrade distrbutor" or would the standard 1 be good? TIA
james
Im currently piecing together an upgrade 1.6 cvh for my orion I've found a brand new block straight from fords in the crate (lucky and excited about that!)
I also have a polished/ported head with fast road cam and solid lifters and a set of twin DHLA 40s. If all goes well I'm hoping it turns out really well. My question is" would I be better running a different/upgrade distrbutor" or would the standard 1 be good? TIA
james
20-09-2016 | 12:25 PM
#2
PassionFord Post Troll
Joined: Aug 2004
Posts: 3,451
Likes: 178
From: Colchester,essex
Standard is fine IMO (if in good condition - easily rebuilt), but get it recurved to suit the engine.
If not, go over to coilpack and igniton management like MegaJolt to really get the best out of what you build
If not, go over to coilpack and igniton management like MegaJolt to really get the best out of what you build
The following users liked this post:
Orionjim (20-09-2016)
Thread
Thread Starter
Forum
Replies
Last Post