The over priced parts thread
#522
Advanced PassionFord User
someone asked me what the clips i do were made of. So I told them. All the reply was, err ok which I didn't ask.
not sure what is used on the centre caps but it will need to be abs plastic or similar. The other stuff that can be used will melt or deform. Interesting to find out if theses have been tried with hot wheels.
I think ford used ABS or polyurethane, not sure which. But £200 a set is a bit steep. I can make a rough guess at how much they are to produce minus design time and I know what I'd price them at.
not sure what is used on the centre caps but it will need to be abs plastic or similar. The other stuff that can be used will melt or deform. Interesting to find out if theses have been tried with hot wheels.
I think ford used ABS or polyurethane, not sure which. But £200 a set is a bit steep. I can make a rough guess at how much they are to produce minus design time and I know what I'd price them at.
#524
Glennvestite
iTrader: (1)
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,761
Received 1,044 Likes
on
998 Posts
I seen this earlier. Somebody making 3d printed escort cosworth centre caps.
https://www.ebay.co.uk/itm/Ford-Esco...s/283120130683
https://www.ebay.co.uk/itm/Ford-Esco...s/283120130683
see I would say they are dear. A 100 quid is more like it. 200 pound for 4. That's 50 quid a cap.
#525
Advanced PassionFord User
Ok done some checking and the centre caps should be printed in nylon. Anything else and it will either melt, warp or (if exposed to solvents petrol/brake fluid) dissolve.
#527
Advanced PassionFord User
Right just massaged the escos centre cap seller. The caps are made from PLA. So as not to bias anything, if someone would like to look up the properties of this type of plastic filament and see what happens when it is heated up over several cycles. Oh an why it’s a popular plastic for the green eco people.
Last edited by robrs2; 24-08-2018 at 07:22 PM.
#528
PassionFord Post Whore!!
iTrader: (2)
Right just massaged the escos centre cap seller. The caps are made from PLA. So as not to bias anything, if someone would like to look up the properties of this type of plastic filament and see what happens when it is heated up over several cycles. Oh an why it’s a popular plastic for the green eco people.
The EsCos wheel centre has the injection and ejection on the same side of the tool along with sliding cores for the undercuts and a hot sprue bush, I doubt you could get an injection mould tool made for less than £10,000 even if it were sub contracted out to a Chinese toolmaker.
If anyone has step file they've managed to produce, send it over to these people for a quote http://www.bluesky-mold.com/
We had 3 tools made by them and they were useable, but far from perfect.
#529
PassionFord Post Troll
Read on another forum that the melting point was around 150 degree’s
#530
PassionFord Post Whore!!
Mark V8. You are right about the high cost of injection moulding dies for new products. My Brother was a specialist toolmaker for one of Australia' largest poly bush manufacturers and he was responsible for making the dies and he told me the costs were very high as he sometimes spent weeks getting everything just right. The costs can be re-couped once you start producing thousands of the products but to try and do a small batch of something would never be cost effective.
#531
Advanced PassionFord User
Used in the correct application PLA is a good plastic. I’ll be using it for the sapphire cosworth skirt mounting brackets. They are not subjected to heat so will not degrade and the PLA is strong as fook.
For centre caps I’ll be using nylon. Injection moulding a copy of the escort cosworth caps is not going to be a viable option.
And they will have to be done without the Ford logo unless a license option is taken out
For centre caps I’ll be using nylon. Injection moulding a copy of the escort cosworth caps is not going to be a viable option.
And they will have to be done without the Ford logo unless a license option is taken out
#533
Glennvestite
iTrader: (1)
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,761
Received 1,044 Likes
on
998 Posts
Seen the price he wants for these escos centre caps.
https://m.ebay.co.uk/itm/Escort-cosw...4AAOSwQS1bgasH
https://m.ebay.co.uk/itm/Escort-cosw...4AAOSwQS1bgasH
The following users liked this post:
Glenn_ (26-08-2018)
#535
PassionFord Post Whore!!
Seen the price he wants for these escos centre caps.
https://m.ebay.co.uk/itm/Escort-cosw...4AAOSwQS1bgasH
https://m.ebay.co.uk/itm/Escort-cosw...4AAOSwQS1bgasH
#537
has anyone seen the price of the abs clips for the front struts starting bids 100 quid !
surely these could be bespoke made for less ? im all for originality but at what price lol
surely these could be bespoke made for less ? im all for originality but at what price lol
#554
Advanced PassionFord User
#560
I've found that life I needed.. It's HERE!!