Quick question

Reply Subscribe

Thread Tools

Search this Thread

May 29, 2015 | 11:11 AM

KW-rscos

Thread Starter

I've found that life I needed.. It's HERE!!

Joined: Dec 2005

Posts: 1,318

Likes: 2

From: Exeter

Quick question

Converting the rear brakes on 2wd Saph Cossie to 4x4 vented discs, do I need the whole caliper, carrier, handbrake cable and different lines as well or just discs and calipers?

Regards, Kieren

May 29, 2015 | 11:58 AM

doga-ot

PassionFord Post Troll

iTrader: (1)

Joined: Jul 2008

Posts: 3,314

Likes: 47

From: East london

Disks, whole calipers, carriers and not sure on handbrake cable

May 29, 2015 | 03:47 PM

costina

Live long and prosper!!

iTrader: (1)

Joined: Aug 2005

Posts: 9,158

Likes: 373

From: area 51

Cable is the same. But you will need to remove dust shields. Cut them off if corroded or you will need to remove hub.

Paul

May 29, 2015 | 06:51 PM

KW-rscos

Thread Starter

I've found that life I needed.. It's HERE!!

Joined: Dec 2005

Posts: 1,318

Likes: 2

From: Exeter

Awesome, thanks guys.

May 29, 2015 | 06:57 PM

daz1968

I've found that life I needed.. It's HERE!!

Joined: Feb 2005

Posts: 1,142

Likes: 0

I fitted 4wd discs on back of my 3 door and fitted discs, calipers and carriers but the dust shields were fine nothing catches on them at all so just left them in place