Help Fitting Grey's Needed...
#1
15000
Thread Starter
Join Date: Jun 2004
Location: Denmark
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Help Fitting Grey's Needed...
Got to fit a set of grey injectors to my car this weekend, can someone
tell me how they fit them. I know someone had a picture of an
injector with the fitting kit on it, any chance someone can post that up?
Injectors have a blue shroud on the end (not I don't mean the covers)....
tell me how they fit them. I know someone had a picture of an
injector with the fitting kit on it, any chance someone can post that up?
Injectors have a blue shroud on the end (not I don't mean the covers)....
#2
PassionFord Post Whore!!
You need to cut the blue shroud off carefully.
http://wwwrsphysse.anu.edu.au/~amh11...l_injector.htm
http://wwwrsphysse.anu.edu.au/~amh11...l_injector.htm
#4
15000
Thread Starter
Join Date: Jun 2004
Location: Denmark
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
#7
PassionFord Post Whore!!
Join Date: May 2003
Location: Doncaster
Posts: 5,143
Likes: 0
Received 0 Likes
on
0 Posts
sirmark, you dont need the caps only the metal washers and rubber o rings, some people drill the ends off and fit them, i (well karl norris did it for me) just binned them as have many others
Trending Topics
#9
15000
Thread Starter
Join Date: Jun 2004
Location: Denmark
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Can they be mounted in the manifold as they look here?
http://www.cosworth-racing.dk/billedere/IMG_2289.JPG
http://www.cosworth-racing.dk/billedere/IMG_2289.JPG
#12
15000
Thread Starter
Join Date: Jun 2004
Location: Denmark
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Matt
sirmark, you dont need the caps only the metal washers and rubber o rings, some people drill the ends off and fit them, i (well karl norris did it for me) just binned them as have many others
#19
15000
Thread Starter
Join Date: Jun 2004
Location: Denmark
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
thanks mate
Why is it that the yellow cap isn't made with a 7 mm hole from the beginning....
So I cut all of the blue shroud off or am I supposed to leave some where the o ring and the spacer is being placed?
I know I ask a lot, sorry! But I just want to make sure that I do it right, because afterwards it's to late
Why is it that the yellow cap isn't made with a 7 mm hole from the beginning....
So I cut all of the blue shroud off or am I supposed to leave some where the o ring and the spacer is being placed?
I know I ask a lot, sorry! But I just want to make sure that I do it right, because afterwards it's to late
#20
impreza wrx sti version 8
iTrader: (2)
Originally Posted by sirmark
thanks mate
Why is it that the yellow cap isn't made with a 7 mm hole from the beginning....
So I cut all of the blue shroud off or am I supposed to leave some where the o ring and the spacer is being placed?
I know I ask a lot, sorry! But I just want to make sure that I do it right, because afterwards it's to late
Why is it that the yellow cap isn't made with a 7 mm hole from the beginning....
So I cut all of the blue shroud off or am I supposed to leave some where the o ring and the spacer is being placed?
I know I ask a lot, sorry! But I just want to make sure that I do it right, because afterwards it's to late
#21
sirmark......take off the blue shroud...leave cap off,the reason it aint the correct size is cause the injector is not for a cossie!!! ....on this part use 2 rubber o-rings to ensure a nice seal proof fit....on the top use the metal spacer and 1 o-ring.
Thread
Thread Starter
Forum
Replies
Last Post