bj928

who still makes a 3dr thundersaloon kit, i know about the Smith and Deakin kit, but is there any others, or any used kits around, the viper powered sierra needs more rubber and this is the only route to go we think, anyone got any other ideas to get at least a 295 18 wheel under the arch with no rubbing issues

XRT_si

iTrader: (2)

Not sure about a kit but have you thought about going the other way and tubbing the inner arches to fit the wider tyres? And either narrowing your axle or fitting a solid axle?

davidfox280585

add this lad,i beleive his dad has one unfitted
https://www.facebook.com/#!/dave.spo....leafe?fref=ts

bj928

its got a solid 8.8 mustang axle already, tubbing inside would be difficult because of the amount of cage that would need moving and changing, then the axle would maybe need narrowing as u say, its plan B though

XRT_si

iTrader: (2)

Proper axle! If you're on 28 spline shafts it's pretty easy to narrow, or you could maybe get away with playing with offsets on split rims.

May require some cage work but it;s the way I'd go.

bj928

31 spline as they are stronger, and i believe u can't narrow a 31 spline

rsmark86

iTrader: (3)

X-sport

Jay. On here might be able to sort you a kit

XRT_si

iTrader: (2)

Yep, as I found out no one can shorten 31 spline shafts unless you're in America!

marco polo

iTrader: (1)

https://passionford.com/forum/ford-r...aloon-kit.html


just been put on

rsmark86

iTrader: (3)

Just about to add the link

£200 Ono bargain

bj928

been and bought the kit listed here but as thought it is way to wide for the look we are looking for, the kit i'm looking for is this one with the small lower intake vent, anyone know who makes or made it.

bj928

i'm sure its not one of smith & deakin's kits, will have to keep digging to find the maker