gray_rs

When fitting the msd cosworth wasted spark conversion, on a p8, I heard there is 2 wires that come from the new wiring kit from the 2 ignition amplifiers and needs to be wired to your ecu?

Does any1 have instructions for fitting this?


Cheers Shaun

BRAMMER

iTrader: (23)

Ask the guy that fit's them

https://passionford.com/forum/member...lopments-.html

gray_rs

Pm'd him,

Thanks

daz1968

Usually trigger wires for amps are pins 25 and 26 on ecu plug. Bit then mine is msd wasted spark board where p8 just has it activated in software.

boost mad

iTrader: (8)

Pin 21 and 26

Pin 21 goes to Pin 1 of the brown connector