Remote Brake Adjuster Help
#2
Advanced PassionFord User
Hi Brian,
You need an adapter to grub screw the cable end into that locks onto the end of the balance bar...
Dependant on manufacturer the balance bar could be M10 x 1, 3/8x24 unf or 7/16x20 unf...
You'd need to check with a thread gauge...
HTH
Ian
You can see it on the left hand side of this balance bar
This is the sort of thing available fro OBD...
http://www.rallynuts.com/motorsport-...e-adaptor.html
HTH
Ian
You need an adapter to grub screw the cable end into that locks onto the end of the balance bar...
Dependant on manufacturer the balance bar could be M10 x 1, 3/8x24 unf or 7/16x20 unf...
You'd need to check with a thread gauge...
HTH
Ian
You can see it on the left hand side of this balance bar
This is the sort of thing available fro OBD...
http://www.rallynuts.com/motorsport-...e-adaptor.html
HTH
Ian
Last edited by ian sibbert; 14-09-2012 at 03:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post