AJC

iTrader: (6)

Right I'm stumped.

I fitted a clutch to someone's 4x4 saff.

Spec - greys and t34 turbosystem mapped.

It was slipping, had a AP organic which was new with iirc AP cover plate.
The reason it slipped was the flywheel face was distorted so was only gripping on 50% of clutch face.

Fitted an AP 6 paddle spinner. Re used cover plate as was like new. Got flywheel face machined. And now it's still slipping. No oil contamination. Any ideas?

Cheers

rst-g

was any of the fingers on the cover plate out of shape?

RWD_cossie_wil

iTrader: (9)

Maybe a worn cable not releasing the clutch fully? Might be melted behind the turbo?

AJC

iTrader: (6)

Can't recall anything being wrong with the cover plate. And clutch cable seems fine. I'm just goo g to have to remove it and have a look.

Ade500

iTrader: (1)

My money is on the cover too. It may look fine but it sounds like its not clamping enough.

graham c

iTrader: (5)

cover

xr2wishy

iTrader: (2)

Sounds like the cover has warped due to the slipping and flywheel distortion.