How hard to strip a front and rear diff? Any special tools needed?
#1
How hard to strip a front and rear diff? Any special tools needed?
How hard is it to strip down an escos front diff and 2wd 7.5" rear diff? any special tools needed?
I want to strip them down to blast casings and tap a few threads etc before rebuilds,
A specialist will be building them back up but would be easier if I can strip them down and do the blasting and tapping before he gets them to rebuild.
Thanks
Marc
I want to strip them down to blast casings and tap a few threads etc before rebuilds,
A specialist will be building them back up but would be easier if I can strip them down and do the blasting and tapping before he gets them to rebuild.
Thanks
Marc
Last edited by M K; 15-12-2010 at 05:34 PM.
#4
PassionFord Post Whore!!
iTrader: (3)
if all you are doing is swoping the bearings out you will need a very long socket to do the rear diff nut all so just so you no theres 2 sizes of seal,s for the flange that prop bolts to i will try to see wot size socket i used to do my diff . you can see from my photo how fare down the fread is for the second nut
and in this photo this is were there are to sizes
and in this photo this is were there are to sizes
Thread
Thread Starter
Forum
Replies
Last Post
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM
xr4x4rs
Cars & Parts Wanted.
5
06-08-2015 09:03 PM
paceo
General Car Related Discussion.
12
04-08-2015 08:50 PM
Graceland
Non Ford parts & other stuff for sale
1
31-07-2015 10:34 AM