looks like i need to name and shame..
04-11-2010, 12:28 PM
#1
looks like i need to name and shame..
before i do i can't believe its got to this, i have dealt with this person a few times before and many others will have and had no problems at all but a good service.
its ryan from carlooms uk, he has had my secs monitor for months now, i have sent him email's, txts and calls but no answer or return messages. now this week i've pushed to get it back because its been so long, so i've pm'ed him on here twice yesterday, i know he has been on a few times since but he still won't get back to me.
on tuesday i decided to call from a different number and he did answer but when he heard my voice he made on he lost reception, called him straight back twice and he would'nt answer my call.
i hope he see's this and contacts me before i proceed through county courts to get it back or the value of it back.
its ryan from carlooms uk, he has had my secs monitor for months now, i have sent him email's, txts and calls but no answer or return messages. now this week i've pushed to get it back because its been so long, so i've pm'ed him on here twice yesterday, i know he has been on a few times since but he still won't get back to me.
on tuesday i decided to call from a different number and he did answer but when he heard my voice he made on he lost reception, called him straight back twice and he would'nt answer my call.
i hope he see's this and contacts me before i proceed through county courts to get it back or the value of it back.
04-11-2010, 12:45 PM
#7
i agree with all the above comments,
i have one of his looms in my car, i've had loom extentions made, about 6 months ago i sent the loom to him and had a secs loom fitted no problems at all just a good service.
he's also been very helpful when i've had wiring problems.
i don't know why he is ignoring me.
i have one of his looms in my car, i've had loom extentions made, about 6 months ago i sent the loom to him and had a secs loom fitted no problems at all just a good service.
he's also been very helpful when i've had wiring problems.
i don't know why he is ignoring me.
Trending Topics
04-11-2010, 12:49 PM
#8
10K+ Poster!!
He may of been working away or bumming someone ?
Either way it is a bit odd as he has always been very helpful.
I'd call him but I expect quite a few people will of already done that for you
Either way it is a bit odd as he has always been very helpful.
I'd call him but I expect quite a few people will of already done that for you
04-11-2010, 05:24 PM
#20
He does a fair bit of work away for race teams, working long hours due to their tight deadlines . He might not be able to get the thing posted back to you until he's back home , hence (and dont take this the wrong way) you might not be on the top of his list of things to do .
04-11-2010, 07:10 PM
#21
PassionFord Post Whore!!
iTrader: (1)
Join Date: Jun 2003
Location: Essex
Posts: 5,076
Likes: 0
Received 0 Likes
on
0 Posts
He does a fair bit of work away for race teams, working long hours due to their tight deadlines . He might not be able to get the thing posted back to you until he's back home , hence (and dont take this the wrong way) you might not be on the top of his list of things to do .
sorry but WHAT you've wrote is a load of bullocks m8! If he took the job on then HE should of done it or at least have the manners to let him know when he'd be getting it back!
And before more people try to start turning this post into a joke have a good think about what you write!
04-11-2010, 07:17 PM
#23
Chasing Radders
04-11-2010, 08:32 PM
#26
He does a fair bit of work away for race teams, working long hours due to their tight deadlines . He might not be able to get the thing posted back to you until he's back home , hence (and dont take this the wrong way) you might not be on the top of his list of things to do .
thats fair enough if that is the case if he let me know
but how do you explain, me calling from another number, him answering the phone then when i said who i was i lost connection, phoned him straight back twice no answer?
i payed on the 20th of september for the job i wanted doing.
since paying i left it around 3 weeks, then started sending emails asking how he was getting on.
its only this week i've pushed to get it back.
05-11-2010, 10:45 PM
#29
sorry but WHAT you've wrote is a load of bullocks m8! If he took the job on then HE should of done it or at least have the manners to let him know when he'd be getting it back!
And before more people try to start turning this post into a joke have a good think about what you write!
And before more people try to start turning this post into a joke have a good think about what you write!
. Is that a sensible enough for you , ask any owner of a Cossie on here with an aftermarket loom.
Last edited by Lo@der; 05-11-2010 at 10:54 PM.
05-11-2010, 10:51 PM
#30
PassionFord Post Whore!!
06-11-2010, 05:36 AM
#33
name and shame???
for saying you measure the bottom holes on a beam instead of the top for the size of the diff, it was just a mistake hardly a crime of the centry like you making out??
I'm not surprised you haven't sold the beam yet with you attitude.
i don't know anything about diffs? what do you know about them?
you have'nt even stated what degree beam it is, that will be because you dont know?
whats with the
on your post? big man 
for saying you measure the bottom holes on a beam instead of the top for the size of the diff, it was just a mistake hardly a crime of the centry like you making out??
I'm not surprised you haven't sold the beam yet with you attitude.
i don't know anything about diffs? what do you know about them?
you have'nt even stated what degree beam it is, that will be because you dont know?
whats with the
on your post? big man
Last edited by B13 JUS; 06-11-2010 at 07:31 AM.
08-11-2010, 12:57 PM
#39
15K+ Super Poster!!
Join Date: May 2003
Location: Southampton
Posts: 18,589
Likes: 0
Received 0 Likes
on
0 Posts
just so everyone knows, as im sure everyone loves a bit of PF gossip.
i've spoken to justin and will be posting the monitor today.
i dont come on here anymore with severe lack of time and to be honest its not what it was.
reasons monitor is late are 2 reasons, well mainly 1 in justins case.
the monitor needed a repair which i wasnt happy to do which as i dont deal with PCB's, as it had snapped copper tracks on it, as its an extreamly old montor (1 or 5 prototypes produced) so is actually different than the production version. i spent some time trying to track someone down how was happy to do this, but as it was such a small job and an unknown product to them they really werent interested.
after a while in all honest it just went out of my mind forgotten about
and with much more important work that i have on it just got left on the sidelines, may sound harsh but im affraid thats how it works.
another factor is i've had alot of personal problems of late which has meant my head hasnt been in the right place and thus work has taken a back seat.
anyway thats all i have to say in the matter.
appologee's to justin as its a bit unexcusable really.
thanks
ryan
i've spoken to justin and will be posting the monitor today.
i dont come on here anymore with severe lack of time and to be honest its not what it was.
reasons monitor is late are 2 reasons, well mainly 1 in justins case.
the monitor needed a repair which i wasnt happy to do which as i dont deal with PCB's, as it had snapped copper tracks on it, as its an extreamly old montor (1 or 5 prototypes produced) so is actually different than the production version. i spent some time trying to track someone down how was happy to do this, but as it was such a small job and an unknown product to them they really werent interested.
after a while in all honest it just went out of my mind forgotten about
and with much more important work that i have on it just got left on the sidelines, may sound harsh but im affraid thats how it works.another factor is i've had alot of personal problems of late which has meant my head hasnt been in the right place and thus work has taken a back seat.
anyway thats all i have to say in the matter.
appologee's to justin as its a bit unexcusable really.
thanks
ryan
