Key coding
Thread Starter
Wahay!! I've lost my Virginity!!
Joined: Jan 2010
Posts: 66
Likes: 0
From: Preston, Lancashire
Key coding
have just fixed my central locking on my 18 zetec MK,1 focus. Does anyone know how to to recode a key? fresh battery and supposidly there is a way of doing it off the ignition? Anyone shed any light on it?
Sorry I was wrong!
Radio Frequency Programming Instructions:
Radio Frequency Programming Instructions:
- Insert the ignition key and turn from position II (Ignition) to position 0 (All off) and back four times within three seconds.
- Remove the ignition key. The locking control system is now in "learn mode" for the next 20 seconds and the red warning system LED (By the clock) stays on continuously to indicate this.
- During the 20 seconds press one of the transmitter buttons. The remotes signal and code number is learned by the locking module and is indicated by flashing the warning system LED.
- Wait until learn mode times out (20 seconds) or switch the ignition back to ON.
Thread Starter
Wahay!! I've lost my Virginity!!
Joined: Jan 2010
Posts: 66
Likes: 0
From: Preston, Lancashire
Done and thanks, four times on and off. I have to press the buttons twice to get it to work, but everything does work. Impressed, gone from no central locking to fully working central lockig.
Thread
Thread Starter
Forum
Replies
Last Post
oilman
Trader Parts for Sale.
10
Sep 23, 2015 07:32 PM
NC53
General Car Related Discussion.
3
Sep 13, 2015 03:05 PM