My mum is in the process of starting to get a new bathroom fitted

The taps she likes for the bath she has been told that it operates at 1 or 1.1 bar pressure.

Her system is gravity fed and the pressure at the min in the bath is really good.

How can i tell if the new tap etc will work ok with the gravity fed system we have?

The tank in the roof space from the top of the exisiting tank to the bottom of the water storage tank is about 10 foot

The plumber has said putting in a good pump that will last is quite expensive and we would like to avoid this if possible or other option is to change the bathroom tap/shower fitting etc.

 

Every 10 metres of head equates to 1 bar.

 

Cheers so different tap set up is the answer

 

Cheapest! Theres plenty of different style taps out there must be another one she will like!

 

Yeah I'm sure there will be something

thus one was like controls on a plate, most of it sunk onto wall and shower hose came out on it's own where ever you wanted if that makes sense and it filled bath through the overflow so it was very clean looking

 

http://www.aqualisa.com/Our-products...ller/#choosing

Like that? can get oneof those to work with gravity, pricey though lol. dont think that includes hose either.

 

The one she was looking at says kai lever WM manual valvve c/w div Cp and then the shower outlet kit and bath filler etc was seperate

But thats the general idea tho i dont think she needs the digital part lol