Xr4x4 shell (new)
#41
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Rear ARB mounts are different. Not sure about the gearbox crossmember.
If you want to use the Sapphire loom the fuse box won't fit the bulkhead and you need to make an extra hole in the passenger footwell for the second big grommet or slice one, add the second grommet's cables into that, and you won't have wiring or a pump for the rear washwipe.
If you use the Mk1 loom, the engine loom is part of the main loom so you'll need to figure out wiring for the engine.
The Mk1 and Mk2 front doors are different on the window frame and for the interior handles etc. Not sure about the rears.
If you want to use the Sapphire loom the fuse box won't fit the bulkhead and you need to make an extra hole in the passenger footwell for the second big grommet or slice one, add the second grommet's cables into that, and you won't have wiring or a pump for the rear washwipe.
If you use the Mk1 loom, the engine loom is part of the main loom so you'll need to figure out wiring for the engine.
The Mk1 and Mk2 front doors are different on the window frame and for the interior handles etc. Not sure about the rears.
#42
PassionFord Post Whore!!
iTrader: (1)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Rear ARB mounts are different. Not sure about the gearbox crossmember.
If you want to use the Sapphire loom the fuse box won't fit the bulkhead and you need to make an extra hole in the passenger footwell for the second big grommet or slice one, add the second grommet's cables into that, and you won't have wiring or a pump for the rear washwipe.
If you use the Mk1 loom, the engine loom is part of the main loom so you'll need to figure out wiring for the engine.
The Mk1 and Mk2 front doors are different on the window frame and for the interior handles etc. Not sure about the rears.
If you want to use the Sapphire loom the fuse box won't fit the bulkhead and you need to make an extra hole in the passenger footwell for the second big grommet or slice one, add the second grommet's cables into that, and you won't have wiring or a pump for the rear washwipe.
If you use the Mk1 loom, the engine loom is part of the main loom so you'll need to figure out wiring for the engine.
The Mk1 and Mk2 front doors are different on the window frame and for the interior handles etc. Not sure about the rears.
Steve
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM
SMILER258
Restorations, Rebuilds & Projects.
36
28-09-2015 09:04 AM