Hi,

I have a 'Stack' ST8130 instrument panel like below.



All fine last year when i last drove the car. Over the winter i removed the engine for a refresh, now all installed back i'am getting an error message on the oil pressure reading. The error fault is -999 which is either wiring or sensor failure.

My question is, is there anybody out there that also runs a stack with this (please see below) sensor ST747?



If there is anybody are you willing for me to send you the sensor to plug into your car to see if you have same message, which in turn will tell me if its a sensor fail or wiring issue?

I realise this is a big ask & i will cover all costs but when the sensor new is £120.00 i dont want to buy one till i'am 100% sure.

Thanks for looking!

Martin

 

Ask mike rainbird m8.

 

Have been in touch with Mike already.
Must say very helpful but unfortunatly his sensor is the older style & not compatible with mine.

Thanks for the reply though much appreciated.

Martin

 

mine is the same dash but runs on the VDO pressure gauge

 

I'll have a look at mine on friday mate, I'm not sure what sensor I have.

 

Same as Mike's.
Thanks anyway