General Car Related Discussion. To discuss anything that is related to cars and automotive technology that doesnt naturally fit into another forum catagory.

Dishwasher Engineer

Thread Tools
 
Search this Thread
 
Old Jun 15, 2009 | 09:27 AM
  #1  
Brian's Avatar
Brian
Thread Starter
10K+ Poster!!
iTrader: (2)
 
Joined: Aug 2003
Posts: 11,239
Likes: 11
From: Essex
Default Dishwasher Engineer

Is there any dishwasher engineers on here?

As i am having a bit of trouble with ours, It will run through a programme but before after it had dryed the stuff it would bleep to say its finished but yesturday it never so i openned the door and the bottom of the dishwasher was still filled with water so i drianed it all out and check the waste pipe for any blocks but nothing I then run it through a quick rinse wash and it was fine so i put all the mugs and dishes in there run a full programme and it done the same when i openned it up it was filled with water

Anyone got any idea's??


Brian
Reply
Old Jun 15, 2009 | 09:39 AM
  #2  
rs-tuner's Avatar
rs-tuner
Advanced PassionFord User
iTrader: (1)
 
Joined: Sep 2005
Posts: 2,223
Likes: 1
From: Stoke-on-Trent
Default

poss the drain pump when it does a new programme it should empty the old water see if it does that

if it does poss the wash pump is fucked
Reply
Old Jun 15, 2009 | 09:43 AM
  #3  
carlfiesta999's Avatar
carlfiesta999
BANNED
 
Joined: Jul 2004
Posts: 995
Likes: 0
From: N/A
Default

Programmer/control panel/circuit board thing is fucked on it.

Washing machine used to do it till change the control panel on it, works fine now.
Reply
Old Jun 15, 2009 | 10:22 AM
  #4  
Brian's Avatar
Brian
Thread Starter
10K+ Poster!!
iTrader: (2)
 
Joined: Aug 2003
Posts: 11,239
Likes: 11
From: Essex
Default

Have just run it on a full programme with nothing in it and its worked fine

Going to load it up and try again


Brian
Reply
Old Jun 15, 2009 | 12:10 PM
  #5  
rs-tuner's Avatar
rs-tuner
Advanced PassionFord User
iTrader: (1)
 
Joined: Sep 2005
Posts: 2,223
Likes: 1
From: Stoke-on-Trent
Default

Originally Posted by Brian
Have just run it on a full programme with nothing in it and its worked fine

Going to load it up and try again


Brian
ither the pump is sticking or as said the programme board is dodgy
Reply
Old Jun 15, 2009 | 12:41 PM
  #6  
Brian's Avatar
Brian
Thread Starter
10K+ Poster!!
iTrader: (2)
 
Joined: Aug 2003
Posts: 11,239
Likes: 11
From: Essex
Default

So i need a new drian pump? where will i beable to buy one of these from? are they hard to change?


Brian
Reply
Old Jun 15, 2009 | 05:18 PM
  #7  
Brian's Avatar
Brian
Thread Starter
10K+ Poster!!
iTrader: (2)
 
Joined: Aug 2003
Posts: 11,239
Likes: 11
From: Essex
Default

Still wont work

Anyone know where i can buy a Drian pump for a NEFF S5444X1GB?


Brian
Reply
Old Jun 22, 2009 | 11:31 AM
  #8  
Brian's Avatar
Brian
Thread Starter
10K+ Poster!!
iTrader: (2)
 
Joined: Aug 2003
Posts: 11,239
Likes: 11
From: Essex
Default

All sorted it was the drian pump, bought a new one and just fitted and now its fine


Brian
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hopper350
Garage / Workshop & Tools Section.
2
Sep 4, 2015 12:53 AM
STeve
General Car Related Discussion.
8
Sep 3, 2015 10:49 AM




All times are GMT. The time now is 06:19 AM.