paul hills
#82
just finding my feet
steve for the other memeber who aint as smart as you and I, coudl you show a piccy of what it should look like
#
i know of couse what it should look like, but others may not
#
i know of couse what it should look like, but others may not
#85
DEYTUKURJERBS
Have another pic at the top quality (not) wastegate mounting idea why dont you
See if you can spot in the block n sump (that side, there more in the other!)
Got another 10 or so pics
See if you can spot in the block n sump (that side, there more in the other!)
Got another 10 or so pics
#90
DEYTUKURJERBS
Originally Posted by PhilM
Is that wastegate really operating through a banjo bolt?
So no, deffo not operating
#92
DEYTUKURJERBS
2 holes infact, one in the block, and one in the sump on that side...
Nice biggun on the other too.
I got some nice closeups n clearer pics, but i think they can wait till 2moz
Nice biggun on the other too.
I got some nice closeups n clearer pics, but i think they can wait till 2moz
#94
Jeebus
iTrader: (1)
Join Date: May 2003
Location: Staffordshire, UK
Posts: 8,663
Likes: 0
Received 0 Likes
on
0 Posts
I'm sure I remember Rod saying hardly anything comes out of his screamer pipe though.
Anyway, hasn't this thread already been done a long time ago and Paul himself had to come onto the site.
Anyway, hasn't this thread already been done a long time ago and Paul himself had to come onto the site.
#95
DEYTUKURJERBS
That post was before the engine was took apart and cool pics taken.
That post was before a lot of well respected tuners (not just harvey) had seen the map and seen the datalogging which proves who was 100% in the wrong here.
That post was before there was enough evidence to sue if you wanted...
That post was before a lot of well respected tuners (not just harvey) had seen the map and seen the datalogging which proves who was 100% in the wrong here.
That post was before there was enough evidence to sue if you wanted...
#96
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Jun 2003
Posts: 1,399
Likes: 0
Received 0 Likes
on
0 Posts
What about the re wire on Andy's fuel pump? What Andy was told to connect it to...
#100
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
It might have been the water pump to be honest but I was told it was the fuel pump which was connected to a 700ma rated output on the ECU directly instead of through a relay. It was probably the WI and not the fuel pump as it now looks like....
I haven't spoken to him for ages to be honest. I knew he was having problems but haven't seen him to ask him about them...
I haven't spoken to him for ages to be honest. I knew he was having problems but haven't seen him to ask him about them...
#101
Advanced PassionFord User
Join Date: Sep 2004
Location: Trowbridge
Posts: 1,562
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Itsmeagain
That post was before the engine was took apart and cool pics taken.
That post was before a lot of well respected tuners (not just harvey) had seen the map and seen the datalogging which proves who was 100% in the wrong here.
That post was before there was enough evidence to sue if you wanted...
That post was before a lot of well respected tuners (not just harvey) had seen the map and seen the datalogging which proves who was 100% in the wrong here.
That post was before there was enough evidence to sue if you wanted...
Thats it exactly!!!!
#102
15K+ Super Poster!!
Originally Posted by Mr.worth
My car made 485.5hp on those very same rollers on 4 greys but it wasn't over 450 anywhere else,
Spadge,you never told me that when you sold it to me
Spadge,you never told me that when you sold it to me
I'm sure i would have done pal but as you didn't get the turbo.map or ecu i was running, your engines power will be dependant on what YOU do with it and not what i/Paul did anyway
#107
I've found that life I needed.. It's HERE!!
The first time I saw those wastegate pics I utterly pissed myself. And they are just as shocking today.
I reckon that wastegate set up would struggle to regulate boost if the car was running a T2 let alone a GT35...
I reckon that wastegate set up would struggle to regulate boost if the car was running a T2 let alone a GT35...
#113
DEYTUKURJERBS
bang
pop
pow
Please note, im not and Ians not, saying "dont go whereever, theyl kill your car" just posting up his experiences...
The other people posting up their bad/good experiences, well, up to them.
I think its fair
#116
PassionFord Post Whore!!
oh dear
im well looking forward to reading ians response
Cossymad, after seeing the pictures of that wastegate i just dont know how you can defend the guy who made and fitted it to the car
banjo bolt
im well looking forward to reading ians response
Cossymad, after seeing the pictures of that wastegate i just dont know how you can defend the guy who made and fitted it to the car
banjo bolt
#118
DEYTUKURJERBS
TBH i dont think the wastegate pics, or the destruction pics are the issue really.
There "could" be a defence agaisnt that, ass lickers could say "oh its bad luck" or "oh he wanted the wastegate like that"
(and even if someone did as a tuner to do that, why would a tuner let a car leave that wasnt working properly, and if it wasnt totaly fine, how is there a RR graph? The Trubador way? )
BUT
The fact is the car was on T6 managment with datalogging and the engine map wasnt password protected, so a number of well known and respected tuners have seen the map and/or datalogging and said the map isnt for that engine (ie mad power GT35 job coming on for 600bhp) at all, its for a restricted 300bhp WRC car, and wouldve blown it sky high soon as given any grief, regardless of wastegate control, thas like running 25psi and T4 on a std chip with no boost limiter...
And the datalogging also proves the wastegate control was woefully shite as it shows the explosion happened at 50odd psi boost at jus over 6000rpm
There "could" be a defence agaisnt that, ass lickers could say "oh its bad luck" or "oh he wanted the wastegate like that"
(and even if someone did as a tuner to do that, why would a tuner let a car leave that wasnt working properly, and if it wasnt totaly fine, how is there a RR graph? The Trubador way? )
BUT
The fact is the car was on T6 managment with datalogging and the engine map wasnt password protected, so a number of well known and respected tuners have seen the map and/or datalogging and said the map isnt for that engine (ie mad power GT35 job coming on for 600bhp) at all, its for a restricted 300bhp WRC car, and wouldve blown it sky high soon as given any grief, regardless of wastegate control, thas like running 25psi and T4 on a std chip with no boost limiter...
And the datalogging also proves the wastegate control was woefully shite as it shows the explosion happened at 50odd psi boost at jus over 6000rpm
#119
DEYTUKURJERBS
Originally Posted by Mike Rainbird
Not that this is any defence of Paul, but if the datalogging picked up a reading of 3.6 bar, then as the Pectel reads absolute pressure, this would be 2.6 bar gauge pressure (a mere 37.7 psi not the 50 that peeps are jumping to .
Why you still posting, i thought youve left the country by now as Steve Scotts gonna knock you out after calling him gay too many times
#120
Originally Posted by Itsmeagain
NO you goon, it picked up 4.6bar absolute, ie 3.6bar BOOST :
============================================