General Car Related Discussion. To discuss anything that is related to cars and automotive technology that doesnt naturally fit into another forum catagory.

engine builders

Thread Tools
 
Search this Thread
 
Old Mar 23, 2009 | 07:02 PM
  #1  
rs tingle's Avatar
rs tingle
Thread Starter
I've found that life I needed.. It's HERE!!
iTrader: (1)
 
Joined: Dec 2007
Posts: 1,005
Likes: 0
From: birmingham
Default engine builders

need a good engine builder in birmingham but not too expensive its gone cost me my life savings pmsl .
Reply
Old Mar 23, 2009 | 07:03 PM
  #2  
Mike C's Avatar
Mike C
The Special One
iTrader: (1)
 
Joined: Mar 2005
Posts: 10,852
Likes: 0
From: Bridgnorth
Default

Reyland is a rather good engine builder in Birmingham.

You'd need to elaborate on what you want and what you've got to spend though...
Reply
Old Mar 23, 2009 | 07:34 PM
  #3  
bigchez's Avatar
bigchez
PassionFord Post Whore!!
 
Joined: Nov 2006
Posts: 3,538
Likes: 0
From: .
Default

Go no further than Reyland mate. Martin will sort you out regardless of budget - helped me quite a lot last year running the car on a tight budget.
Reply
Old Mar 23, 2009 | 07:44 PM
  #4  
rs tingle's Avatar
rs tingle
Thread Starter
I've found that life I needed.. It's HERE!!
iTrader: (1)
 
Joined: Dec 2007
Posts: 1,005
Likes: 0
From: birmingham
Default

i now martin iv been there a few times i dont live too far from him but i am on a tight budget at the mo i was doin it my self but i dont want to spend all that muni and put it together wrong .all i want really is a short bottom end rebuild i could do it my self but i get worrid when it comes to it .i brought some pistons of a chap on her nice bloke there 1mm oversize low comp i was told .i just dont want to spend that muni get it on road an blow it up coz iv done it myself ya see .
Reply
Old Mar 23, 2009 | 07:52 PM
  #5  
SiZT's Avatar
SiZT
Advanced PassionFord User
 
Joined: Sep 2007
Posts: 1,896
Likes: 5
From: Staffordshire
Default

put it this way, I work in what you would call a back street garage and Martins labour rate is cheaper than ours
Reply
Old Mar 23, 2009 | 07:54 PM
  #6  
rs tingle's Avatar
rs tingle
Thread Starter
I've found that life I needed.. It's HERE!!
iTrader: (1)
 
Joined: Dec 2007
Posts: 1,005
Likes: 0
From: birmingham
Default

cool il go see him on the sat if he is open take all the bits lol
Reply
Old Mar 23, 2009 | 07:59 PM
  #7  
SiZT's Avatar
SiZT
Advanced PassionFord User
 
Joined: Sep 2007
Posts: 1,896
Likes: 5
From: Staffordshire
Default

probably best to PM him on here first mate and get a quote then get youself booked in
Reply

Trending Topics

Old Mar 23, 2009 | 08:21 PM
  #8  
Mark_w's Avatar
Mark_w
Advanced PassionFord User
 
Joined: May 2003
Posts: 2,296
Likes: 0
From: west sussex
Default

How much muni have you got to spend

mark
Reply
Old Mar 24, 2009 | 10:16 AM
  #9  
rs tingle's Avatar
rs tingle
Thread Starter
I've found that life I needed.. It's HERE!!
iTrader: (1)
 
Joined: Dec 2007
Posts: 1,005
Likes: 0
From: birmingham
Default

lets say its a credit card at the mo lol around the 2k mark
Reply
Old Mar 24, 2009 | 10:59 AM
  #10  
R5FORD's Avatar
R5FORD
10K+ Poster!!
iTrader: (1)
 
Joined: Jul 2006
Posts: 10,753
Likes: 3
From: wolverhampton/ australia
Default

Give SCS a call mate.
Reply
Old Mar 27, 2009 | 09:37 PM
  #11  
Martin-Hadland's Avatar
Martin-Hadland
1st to 200 without NOS
iTrader: (2)
 
Joined: May 2003
Posts: 12,304
Likes: 121
From: Birmingham
Default

Originally Posted by R5FORD
Give SCS a call mate.
And Harvey is based in Birmingham, yes? Tool!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hopper350
Garage / Workshop & Tools Section.
2
Sep 4, 2015 12:53 AM
STeve
General Car Related Discussion.
8
Sep 3, 2015 10:49 AM




All times are GMT. The time now is 02:42 PM.