no spark on flamer kit any ideas please
28-11-2004, 08:36 PM
#1
PassionFord Regular
Thread Starter
Join Date: Jun 2003
Location: sunny essex
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
no spark on flamer kit any ideas please
heloo peeps i have just bouhgt a reziztanz dragon flamer kit for my cos but cannot seem to get a spark from it,even though all the wires semm to b on there as instructions say but no spark.any ideas would b great.rick e 
28-11-2004, 08:43 PM
#3
PassionFord Regular
Join Date: Jun 2003
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
If its anything like what my mate bought it will be made very poorly, i had to strip his apart and re-solder all the joints.
Dont know if his was the same make as you bought but i wasnt impressed.
Dont know if his was the same make as you bought but i wasnt impressed.
28-11-2004, 09:15 PM
#4
have you installed it or just seeing if it works??
if you just wired it up, the sparkplug needs to be earthed.
if its all in the car, then check the earths, check there is a voltage coming out the control box, if so, check if there is a voltage from the coil, should show up if summuts not right
if you just wired it up, the sparkplug needs to be earthed.
if its all in the car, then check the earths, check there is a voltage coming out the control box, if so, check if there is a voltage from the coil, should show up if summuts not right
Thread
Thread Starter
Forum
Replies
Last Post
jonfoc
General Car Related Discussion.
16
11-09-2018 05:35 PM