2.0 Zetec Clutch On A Type 9 Box
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: Jul 2007
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
2.0 Zetec Clutch On A Type 9 Box
How do i do this???
what parts do i use from what car,
running the capper on a 2.0 zetec (blacktop one) onto an old Type 9 gearbox which is standard on the capri
the engine comes from a 2.0 mondeo on a Y plate.
how do i sort out the clutch on this?
would the pressure plate etc be from the zetec n the holders be from the type 9 or something???
anyone got any ideas, the clutch is slipping like a bitch (worn out and old ) and i need to know what i need to replace it??
what parts do i use from what car,
running the capper on a 2.0 zetec (blacktop one) onto an old Type 9 gearbox which is standard on the capri
the engine comes from a 2.0 mondeo on a Y plate.
how do i sort out the clutch on this?
would the pressure plate etc be from the zetec n the holders be from the type 9 or something???
anyone got any ideas, the clutch is slipping like a bitch (worn out and old ) and i need to know what i need to replace it??
#3
Advanced PassionFord User
Either a machined standard Zetec flywheel lightened and re-drilled to accept a 210mm RS2000 clutch and cover or for a real tidy job, a custom flywheel and a 7 1/4" single plate clutch from the likes of Helix, AP or Tilton....
There is a guy on turbo sport doing the flywheels.....
http://www.turbosport.co.uk/showthread.php?t=124298
There is a guy on turbo sport doing the flywheels.....
http://www.turbosport.co.uk/showthread.php?t=124298
Last edited by ian sibbert; 20-08-2008 at 09:41 AM.
#4
PassionFord Regular
Join Date: Aug 2007
Location: kent
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post