Berta

Hi,

I am mounting a Pro alloy rs500 in the escort cosworth and need a Silicone Hose elbow 180º to re-circulate the water.

Which is the diameter that I need?? These exist in ... 16mm, 19, or 22mm?

Thank you for your answers.

Thanks!!



Sorry for my poor english..

Turbo Zetec

iTrader: (1)

please explain this a bit better... the pro alloy 500 cooler usually fits straight on with the correct brackets...

Billabong

He's most likely talking about re-piping the water from the original charge cooler - Pro Alloy do a kit for this.

dave cos4x4

iTrader: (5)

if you look at the horse shoe type of pipe in front of the turbo, thats what is needed to re-circulate the water....it goes from the thermostat housing onto the metal pipe going to the heater system.

i got mine from Roose motorsport.

sorry..not sure of the diameter.

Turbo Zetec

iTrader: (1)

sorry, my bad

dave cos4x4

iTrader: (5)

you can turn the elbow on the thermo housing around to meet the metal water pipe or fit a sierra cos 4x4 thermo housing with the elbow facing the bulkhead already.

R5FORD

iTrader: (1)

i think he is fitting a rs500 cooler to an escos

dave cos4x4

iTrader: (5)

he will need one.


http://cgi.ebay.co.uk/Look-Escort-RS...d=p3286.c0.m14

Berta

Thank you for your answers!!

But I do not know that measured to buy!!!

https://www.burtonpower.com/product_...px?CCode=PC070

I have doubt between 16mm and 22mm