should have all my lovely stack bits through next week from mike

went for the ST700SR, so if you gone of these, can i see how you mounted em please. also getting boost/egt/oil temp/fuel level

will look a bit odd on mine, as the SR is 80mm, and the guages are 52mm, i have 3 holes for gauges on the dash, so one will in clock area next to the SR
what you you have directly infront of you? boost i guess, and then the egt/oil temp/fuel level in the dash cutouts?

thanking

 

About to order Stack 52mm -Oil Pressure, Fuel Pressure, Oil Temp, Water Temp, Volts & EGT to complement.

A

 

That looks nice and neat Rod

 

looks good Rod.

i will probably use a bit of carbon, and have the ST700SR in the middle, and may have to buy an additional volt gauge to fill a hole in tha dash lol, and have the boost and oil temp in the clock area.

also the idiot lights somewhere

 

Paint the Elliot needle Red Rod. would look alot better I reckon.

 

oil pressure and water temp on seperate racetec gauge,easier to see than going through the stack 700 menu,mounted in 2mm carbon sheet

 

nice one mate

how much hassle is it to go through the menu then?

and do the alarms flag up over the speedo if you get a problem?

 

not easy to trawl through it while moving can be left on what values you want,alarms can be set to what values you want too and come up over whats on display

 

nice one, cheers fella

 

My old classic setup, now residing in B9KOS's car....

 

thats pretty cool rich.

im in 2 minds whether to just hac up the std clocks to leave only the idiot lights, or just bin it off and use carbon sheet..?

 

I'm a big fan of symmetrical dash designs - just makes it look right!!



2 x 80mm and 2 x 52mm would be good

 

Loving the look of that^^^^^^^
How much you looking for a similar set-up?

 

Kev, i do like yours

i like the idea of going for the 80mm round display, but its getting other things to go in there aswell - without looking congested or a mix match of different designs etc.

 

Lee
been going to do that for 3 years , may do it when I come to fit the new gauges, you know how it is these little things never seem to get done .

 

Yep!! that looks good, well laid out.

 

kev, i want my dash back

 

That does look very good!

mine will look similar to this i guess lol oOo

 

indeed mate

 

lee is thats yours? the seat looks too far back for your stumpy legs?

 

and these

 

ive only got the 1 80mm gauge, cant afford another

 

Lee, your main stack display, does that show the rev counter?

if so, whats the other stack next to it mate?

Cheers

 

Yes!

 

Great spot! forgot about that!

When Redline shot the car, the boost gauge was off being repaired. So a design monkey must have photoshopped another speedo in!

 

Now that is very nice Lee mate

 

its for sale

 

My A Pillar:
AEM Wideband & Defi Boost Gauge


My Dash:
Defi Tacho and Defi Link Display for water and oil temps, ATL Fuel Gauge, SPA Speedo and Bright6 Idiot Lights:


Also have Defi Oil Pressure, Fuel Pressure and EGT in a 3 gauge strip and my AVCR where the radio should be

Also have

 

 

Very nice will... but he is asking for STACK stuff read the title!

 

Any one got a pic of martins escort dash.
My plan is 80mm Elliot boost,80mm Stack speedo/rev, defi water temp,defi egt and try and fit in the original idiot lights. Just need to think of what fuel gauge to use and how to try and get it all to fit.

 

My bad

I read as far as 'Its custom dash time'...

 

yeah will you dopey twat

some very nice looking dashes on the go here boys!!